Refrigerator Drawer, Shelf, Pan

The Door Shelf Support is an OEM part for Frigidaire refrigerators. This part supports the door shelf, providing a sturdy base to hold various items such as bottles, jars, and condiments securely in place on the refrigerator door.

Common causes of a bad door shelf support include regular wear and tear, overloading the shelf with heavy items, or accidental damage. 

Symptoms of a bad door shelf support include:

• The door shelf sagging or tilting
• Items falling off the shelf
• The shelf not staying securely in place
• Visible cracks or breakage in the support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Crisper Pan is an OEM part for Frigidaire refrigerators featuring interior crisper drawers. It functions as a durable liner tray optimized to maintain proper humidity levels for storing fruits and vegetables. 

Symptoms of needing replacement include:

• Excessive cracking, pitting or peeling of surfaces   
• Sharp edges or broken corners become a hazard
• Difficulty fitting properly or staying securely in a drawer
• Inability to retain moisture or prevent drying out of foods

Causes can include heavy usage wear over time, being damaged during cleaning, or warping from extended high-humidity environments. 

This genuine OEM crisper pan is compatible with Electrolux, Gibson, Kelvinator, and Kenmore fridge models. 

This refrigerator crisper drawer replaces a damaged or missing produce bin. It restores smooth-sliding, dedicated storage for fruits and vegetables to keep the crisper area organized and easy to use.

• Holds and organizes produce in the refrigerator's crisper compartment; slides on the side rails beneath the crisper cover
• Replace when cracked, warped, or missing
• Common symptoms: broken corners, drawer binds or falls off tracks, or produce can't be stored properly
• Restores proper fit and smooth operation of the crisper section

• Remove food, pull the old drawer out to the stop, lift slightly to clear the rails, and remove
• Align the new drawer on the rails and slide straight in until fully seated
• Let cold plastic warm to room temperature before installation; do not force into place
• If removing shelves or covers for access, handle glass carefully; unplug the appliance if you'll be working near electrical components

The Pan-Snack is an OEM part for Whirlpool refrigerators. This component, often referred to as the snack drawer, is designed to provide a convenient storage solution within the refrigerator for small items such as snacks, cheeses, and deli meats. The pan-snack ensures these items are organized and easily accessible, contributing to the overall functionality and tidiness of the refrigerator.

Causes of a bad snack pan can include cracks or breaks due to impact or heavy loads, warping from temperature fluctuations, or general wear and tear over time. These issues can compromise the pan's functionality and the overall organization within the refrigerator.

Symptoms of a bad pan-snack include:

• Cracks or breakage in the plastic
• Difficulty sliding the drawer in and out
• Items not staying organized or securely in place
• Visible wear or warping

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Refrigerator crisper drawer that serves as the vegetable pan. It holds produce in the crisper section and slides on the rails to keep items contained and organized. Replace cracked or missing bins to restore smooth access and storage. What it does:

• Contains fruits and vegetables in the crisper area beneath the cover
• Works with the crisper cover/humidity controls to help manage moisture
• Slides on the frame rails for easy, smooth access when intact
• Replace if cracked, broken, warped, or if it won't stay on its tracks

• 1 vegetable pan (crisper drawer)

• Unplug the refrigerator before servicing interior parts
• Remove the crisper cover or shelf if needed; pull the old pan straight out
• Clean and inspect the rails; align and slide the new pan fully onto the tracks
• Do not force or overload the drawer; verify smooth travel

The Lower Crisper Drawer Cover is an OEM part for Frigidaire refrigerators. It is designed to fit and protect the lower crisper drawer, keeping your fruits and vegetables fresh and organized.

A bad lower crisper drawer cover can be caused by wear and tear, damage, or accidental mishandling. When the cover becomes faulty, it can result in issues such as difficulty in sliding the drawer in and out, inadequate humidity control, or compromised freshness of stored produce.

Symptoms of a bad lower crisper drawer cover include:

• Difficult drawer movement
• Excessive moisture in the crisper drawer
• Spoiled or wilted fruits and vegetables

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This refrigerator crisper pan is the slide-out drawer that stores fruits and vegetables in the fresh food compartment. Replace a cracked or missing drawer to restore smooth operation and keep produce contained and organized.

• Holds produce in a dedicated compartment within the fresh food section
• Slides on the existing rails for easy access and organization
• Helps maintain a contained environment for produce when used with the original cover/humidity control
• Common signs it's needed: cracked or broken pan, rough or sticking slide action, falls off track, or missing drawer

• Disconnect power before servicing and clear the shelf area
• If equipped, lift out the glass/shelf cover to access the rails
• Align the pan with the tracks and slide straight in; do not force
• The drawer stops engage and the pan moves smoothly on both rails

This replacement door shelf bin mounts inside the fresh food door to provide adjustable storage for condiments, jars, and bottles. Restore secure, organized space when the original bin is cracked, loose, or missing. What it does:

• Attaches to the fresh food door rails and can be repositioned to different slots for adjustable storage
• Holds jars, condiments, and small bottles securely on the door
• Helps prevent items from tipping or falling during door movement
• Replaces a cracked, broken, or missing bin to restore usable capacity

• 1 fresh food door shelf bin

• Disconnect power or switch the refrigerator off; remove items from the door area
• Lift the old bin straight up to release it from the door slots
• Align the new bin with the desired slots and press down until fully seated and secure
• Verify the bin is level and the door closes and seals properly

The Freezer Shelf is an OEM part for GE refrigerators. This shelf provides additional storage space within the freezer compartment, allowing you to organize and store food items more efficiently.

Causes of a bad freezer shelf can include regular wear and tear, damage from heavy or improperly placed items, or cracking from exposure to extreme temperatures.  

Symptoms of a bad freezer shelf include:

• Cracks or breaks in the shelf
• The shelf not fitting properly into the designated slots
• Difficulty in securing the shelf in place
• Reduced storage capacity due to damage

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the door bin frame used on select refrigerators. It supports the clear bin/front, creating a sturdy storage shelf on the inner door for bottles, condiments, and other items. Replace a cracked or missing frame to restore secure door storage.

• Holds and supports the door bin/front on the refrigerator door
• Helps keep items organized and stable during door opening/closing
• Common failure signs include cracks, breaks, or a bin that won't stay seated
• Replacing restores proper fit and capacity of the door storage area

• Unplug the appliance before servicing
• Remove the existing bin components; transfer any reusable inserts/fronts
• Align the new frame with the door mounting slots and snap/slide into place
• Ensure the bin is fully seated and level before loading items

This left-hand support secures and aligns the corresponding shelf or drawer assembly inside the refrigerator, helping it sit level and operate smoothly. Replace a cracked or missing support to restore proper fit and function.

• Provides structural support on the left side of the mounted assembly
• Maintains level alignment to prevent binding, rubbing, or sagging
• Helps drawers/shelves open and close smoothly when intact
• Common signs: uneven or sticking operation, tilting or dropping, visible cracks or broken tabs

• Disconnect power and remove items from the affected area before servicing
• Remove the shelf/drawer; release locking tabs or remove any fasteners holding the old support
• Position the new support on the left side and reuse existing hardware if required
• Smooth operation before reloading

Size: 21-1/4" - 2".

The Door Shelf Support is an OEM part for Frigidaire refrigerators. This part holds and secures the door shelf in place, providing support for the items stored on the shelf. 

Causes of a bad door shelf support can include regular wear and tear, overloading the shelves, or physical damage from impacts. 

Symptoms of a bad door shelf support include:

• Shelves not staying in place or becoming loose
• Cracks or breaks in the support material
• Difficulty in securing the shelf to the door
• The shelf tilting or falling off the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This shelf trim is the molded edge piece for your refrigerator shelf. It snaps in place to restore a clean, secure lip that helps keep items in place and limits spills from reaching shelves below. What it does:

• Attaches to the edge of a refrigerator shelf to create a finished barrier
• Helps retain items and contain minor spills
• Restores stability when the original trim is cracked or missing
• Common symptoms: broken or loose trim, items sliding off the shelf, trim won't stay attached

• 1 shelf trim

• Disconnect power and remove food from the affected shelf before servicing
• Lift out the shelf or bin and place it on a flat, protected surface
• Release the old trim's tabs and slide or unsnap it from the shelf—avoid forcing or flexing
• Align the new trim and press until fully seated; reinstall the shelf or bin

This is the door bin for compatible refrigerators. It mounts on the inside of the door to hold bottles, jars, and condiments, restoring safe, organized storage when an original bin is cracked, loose, or missing. What it does

• Provides storage and organization on the refrigerator door
• Keeps items contained and accessible while the door opens and closes
• Replaces a bin that is cracked, warped, or broken
• Helps resolve issues like the bin falling off, not staying level, or not seating in the door rails

• 1 door bin

• Remove items from the old bin and lift it straight up and out of the door slots
• Align the new bin's hooks/tabs with the molded slots on the door liner
• Press down firmly until fully seated and secure
• Use care to avoid overloading; wear cut-resistant gloves to protect hands

The Shelf Support is an OEM part for Frigidaire refrigerators. Installed at set positions along the side walls, shelf supports provide sturdy surfaces on which to rest adjustable shelves or glass shelves. 

Causes of bad shelf supports can include general wear from repeated loading and unloading of shelves over time, as well as damage from accidental impacts.

Symptoms of bad shelf supports include:

• Shelves that wobble or sag in positions
• Difficulty inserting or removing shelves
• Small dents or breaks in the support surfaces
• Supports that are loosened from wall positions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.