Remington Parts

Governor arm shaft for small engines on lawn and garden equipment. Connects governor assembly to carburetor. Replace if worn, damaged, or broken.

A carbon canister filter cap is an essential piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, wood chippers, string trimmers, log splitters, and edgers. It is compatible with products by brands such as Craftsman, Cub Cadet, and MTD. This carbon canister filter cap is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. The purpose of the carbon canister filter cap is to prevent harmful fumes or chemicals from entering the environment.The replacement or repair process of the carbon canister filter cap should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This governor arm assembly can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm assembly is a connecting part within the governor system; it contains the governor arm and the components that fasten the governor arm to the governor spring and the throttle linkage.Governor arms can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm can affect the functionality of the entire governor system, which could render equipment nonfunctional. If the governor arm or its fastener parts are damaged, a governor arm assembly should be ordered, and the damaged or broken parts should be removed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm assembly is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

Fuel line kit for walk-behind mowers and outdoor power equipment. Replaces cracked, brittle, or leaking fuel hoses to restore proper fuel delivery.

Ignition module for gas chainsaws. Mounts near the engine to control spark timing. Replace if cracked, damaged, or missing to restore proper ignition.

Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.

This lower chute is a quality replacement part that is used on several models of snowblowers. It is made of high-quality plastic for durability and is placed so it can direct snow in a certain direction when it leaves a snowblower. Over time and with regular use, this part can become damaged. If this occurs, it will need to be replaced so the discharged snow ends up in the right location.When replacing the lower chute, a wrench and work gloves will be needed. The snowblower should be placed on a flat surface, and the spark plug wire needs to be disconnected. The gearbox and the lower chute will need to be removed before the new replacement part can be installed. Line up the chute and install it used the cotter pin and flange lock nut. Replace all the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold on an individual basis. The lower chute is used with snowblowers manufactured by Craftsman, Cub Cadet, Huskee, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

Extension spring for snow blower idler pulley assemblies. Mounts to housing to maintain proper tension in belt drive system. Replace if stretched, broken, or missing.

Hinged mulch plug assembly for walk-behind lawn mowers. Replaces worn or broken mulch covers. Includes metal hinge. Installs in place of discharge chute.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

This OEM sprocket assembly contains a sprocket, which is a circular gear with teeth that engage with the links on a chain to move the chain forward.A new sprocket assembly will be needed if the part is broken in any way or if the sprocket teeth are worn off. If it's not immediately obvious to the eye, a test can be performed to determine if a new sprocket assembly is needed. Simply move the chain and if at any point the chain becomes stuck, this means a new sprocket assembly is needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine MTD part sourced directly from the manufacturer and is sold individually. The sprocket assembly is compatible with trimmers manufactured by either Troy-Bilt or Cub Cadet.

Replacement oil tank cap for chainsaws with integrated press bulb. Covers oil reservoir to prevent debris contamination. Needed when cracked or broken.

Right-side wheel assembly with tire and rim for gas snowblowers. Replaces cracked, damaged, or worn wheels for proper traction and maneuverability.

Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.