Remington Parts

Secures hoses to the carburetor on outdoor power equipment engines. Replace if clamp is rusted, broken, or missing to prevent fuel or air leaks.

Replacement muffler stud that secures the muffler to the engine body. Replace if loose, stripped, rusted, corroded, or missing from your equipment.

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

Exhaust piping connects to the muffler system on small engines. Replace if cracked, corroded, or damaged to restore proper exhaust routing and function.

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Replace your worn, broken, or missing throttle linkage spring. This small spring connects to the carburetor linkage on mowers, tillers, and engines.

Threaded stud secures carburetor to intake manifold on lawn mower and outdoor power equipment engines. Replace if stripped, corroded, or missing.

Spike plate assembly with mounting hardware for gas chainsaws. Installs on the bar side to provide leverage during cutting. Replace if cracked or missing.

This bail control arm is the handle-mounted lever that engages the mower's drive or blade system when squeezed against the handle. It acts as a safety mechanism, stopping the blade or self-propel function when released. Replace this part if the bail is bent, broken, or no longer springs back to the disengaged position when released.

Complete fuel tank assembly for snow throwers and tillers. Includes tank and mounting hardware. Replace if cracked, leaking, or damaged during storage.

Replace a damaged or worn control cable for your wheeled gas line trimmer. Installs to enable forward propulsion and stopping control functions.

Starter rope won't retract or engine won't crank? This recoil starter assembly includes housing, spring, pulley, rope and grip. Moderate DIY repair.

Blocks debris from entering your chainsaw engine. Replace when clogged or damaged to maintain performance and prevent engine wear. Confirm fit with your model.

Shield spacer for lawn tractors and riding mowers. Provides proper spacing and alignment for protective shields. Replace if missing, damaged, or worn.