Remington Parts

Replacement muffler stud that secures the muffler to the engine body. Replace if loose, stripped, rusted, corroded, or missing from your equipment.

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

Exhaust piping connects to the muffler system on small engines. Replace if cracked, corroded, or damaged to restore proper exhaust routing and function.

Threaded stud secures carburetor to intake manifold on lawn mower and outdoor power equipment engines. Replace if stripped, corroded, or missing.

Replacement adjustment block for electric chainsaws. Installs in the tensioning assembly. Replace if original is cracked, broken, or missing.

Adjustment block for electric chainsaws. Installs on the bar assembly to control chain tension and positioning. Replace if cracked, stripped, or worn.

Seals the fuel tank where the filter and neck meet on gas-powered equipment. Replace if worn, cracked, or missing to prevent fuel leaks and maintain seal.

Compression spring for rear-tine tillers. Replaces worn, broken, or missing springs in the drive assembly. Essential structural component for tiller.

This is the outer impeller housing that encloses the fan impeller on a leaf blower. It directs airflow generated by the spinning impeller through the blower tube for effective debris clearing. Replace this housing if it is cracked, warped, or damaged, which can cause reduced air output, excessive vibration, or unusual rattling noises during operation.

Throttle trigger handle for gas line trimmers. Mounts on the main handle shaft to control engine speed. Replace if cracked, broken, or unresponsive.

This replacement part is a short block. It is a genuine replacement part made by MTD. A short block is a part that is found inside the engine. It comprises a portion of the cylinder block below the head gasket but above the oil pan. This helps the engine run smoothly overall as well as start and stop the engine efficiently. A new short block might be needed if the user notices that the current one is damaged in any way including being bent, dented, cracked, or chipped. If the user hears unusual noises coming from inside the machine it is possible that the short block is malfunctioning. This can be due to normal wear and tear over time. If this is the case it is recommended that the user replace this part immediately. This is a genuine OEM replacement part. This short block is sold individually and is sourced directly from the manufacturer.

This is a 16-inch cutting chain designed for electric chainsaws. It wraps around the guide bar and performs the actual cutting action when the saw is in operation. Replace the chain if it has become dull, stretched, has broken or missing teeth, or no longer cuts efficiently even after sharpening.

Primer bulb assembly for outdoor power equipment. Mounts on carburetor to draw fuel for starting. Replace if cracked, damaged, or bulb won't hold pressure.

Muffler spark arrestor screen that installs inside the exhaust system. Replace if cracked, clogged with carbon buildup, or missing for safe operation.

Muffler assembly that connects to the exhaust tube on lawn mowers and garden equipment. Replace if cracked, rusted, or damaged to restore proper exhaust flow.