Room Air Conditioner Parts

Filter sub-assembly replaces the refrigerator's water-filter housing, holding the cartridge and directing water to the dispenser and ice maker. Restores secure cartridge seating and consistent water flow when the housing is damaged. What it does:

• Holds and seals the cartridge to help prevent leaks at the filter location.
• Directs filtered water to the dispenser and icemaker plumbing.
• Commonly replaced for leaks at the filter area, reduced water flow, or a loose/ill-fitting cartridge.
• Intended for cartridge-style refrigerator water-filter systems.

• Turn off the refrigerator water supply and relieve dispenser pressure before removing the old filter housing.
• Use basic hand tools; inspect and replace any worn O-rings or seals to ensure a proper seal.
• After installation, restore the water supply, check carefully for leaks, and run/flush water per refrigerator guidance.

This is the air filter assembly for select GE room air conditioners. It traps dust and lint before they reach the evaporator coil, helping maintain airflow and cooling performance.

• Captures airborne dust and lint to protect the coil and blower
• Helps maintain steady airflow and cooling efficiency
• Replace if cracked, warped, missing, or won't stay seated
• Common symptoms include reduced airflow and visible debris on the filter

• Unplug the unit before servicing
• Remove the front grille or filter access panel; slide the old filter out
• Install the new filter with airflow orientation matching the original
• Clean surrounding surfaces and reinstall grille before powering on

This replacement propeller is used on the outdoor fan of room air conditioners. It mounts to the condenser fan motor shaft to move air across the condenser coil, restoring heat rejection and airflow when the original blade is damaged or unbalanced. What it does:

• Moves outdoor air through the condenser coil to expel heat
• Helps address poor cooling caused by weak or no condenser airflow
• Replaces cracked, warped, or loose blades that cause vibration or scraping noises
• Symptom check: outdoor fan not spinning, weak airflow, rattling, or visible blade damage

• Includes: 1 propeller

• Disconnect power before servicing; wear gloves—blade edges can be sharp
• Note blade orientation and hub depth on the motor shaft before removal
• Remove the fastener/set screw and pull the old blade straight off; avoid bending coil fins
• Install the new blade in the same orientation, secure firmly, then test run

This thermostat is the temperature control for room air conditioners. It senses temperature and cycles the compressor to maintain your set comfort level, helping restore consistent cooling when the original control becomes inaccurate or fails. What it does:

• Monitors temperature and opens/closes contacts to start and stop the compressor
• Helps the unit reach and maintain the temperature you select
• Helps resolve symptoms such as: AC won't turn on/off at the dial setting, runs continuously, short-cycles, or temperature adjustments have little effect
• Direct-fit replacement designed for the original mounting location

• 1 thermostat

• Disconnect power before servicing to avoid electrical shock
• Access the control panel; note wire locations and transfer any mounting hardware from the old part
• If your model uses a capillary sensing tube, route it exactly as original and secure in clips; do not kink or sharply bend it
• Reassemble, align the control knob, and test operation across several temperature settings

This air filter assembly traps dust and lint before they reach the evaporator coil, helping your room air conditioner maintain airflow and cooling performance. Replace clogged or damaged filters to protect components and keep cooling consistent. What it does:

• Screens intake air to help prevent debris from coating the evaporator coil and blower
• Helps sustain proper airflow and cooling performance
• A torn, missing, or heavily clogged filter can cause reduced air volume, longer run times, or uneven cooling
• Captures dust and lint that would otherwise accumulate inside the unit

• Includes: 1 air filter assembly

• Unplug the unit before servicing
• Open the front grille to access the filter; note the orientation of the old assembly
• Slide out the old filter and fully seat the new assembly in the same position
• Do not operate the unit without a filter installed

Keep your room air conditioner breathing easy with this replacement air filter. It captures dust and lint to help maintain airflow and cooling performance, while protecting the indoor coil from debris buildup.

• Screens return air to trap dust, lint, and debris before it reaches the evaporator coil
• Helps maintain proper airflow and consistent cooling
• Replace when torn, warped, missing, or heavily soiled
• Common symptoms of a bad/missing filter: weak airflow, poor cooling, longer run times, or frost on the coil

• Disconnect power before servicing
• Access the filter from the front grille or filter slot; slide out the old filter
• Clean the filter track/grille area; install the new filter fully seated and flat
• Operate the unit only with a filter installed to protect internal components

This protector heater provides a small, controlled heat source inside the appliance to keep sensitive components within range. It helps prevent condensation and nuisance trips so the unit operates reliably in cool or humid conditions.

• Provides low-watt heat around a protected area or thermostat
• Helps prevent moisture buildup and condensation
• Stabilizes temperature to reduce nuisance protector/thermal cutout trips
• Symptoms include intermittent operation, unexpected shutoffs, or visible condensation near controls

• Disconnect power before servicing and allow components to cool
• Note wire positions and routing on the original; move one connection at a time
• Mount in the original location and secure leads away from sharp edges, moving parts, and high-heat surfaces
• After installation, restore power and verify normal operation

This refrigerator water filter removes common impurities from the ice and water supply so you get cleaner-tasting water and clearer ice. Designed to fit inline/replaceable filter housings used in many Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor for improved drinking water flavor
• Helps reduce sediment and particulates that can affect ice clarity
• Keeps water flowing properly when replaced as part of routine maintenance
• Addresses symptoms like cloudy ice, bad-tasting water, or reduced water quality

• One replacement refrigerator water filter cartridge

• Replace filter according to your refrigerator manufacturer's instructions; typically twist or push in to seat and lock
• Run several gallons of water through the dispenser after installation to flush the system and remove loose carbon fines
• If water flow is restricted after installation, check filter orientation and seating; do not force
• For safety, disconnect power to the appliance before accessing internal filter housings

This air filter traps dust and lint before they reach the evaporator in your room air conditioner, helping maintain airflow and cooling performance. Replacing a damaged or missing filter protects the coil and keeps the unit running efficiently. What it does:

• Screens incoming air to help keep the evaporator coil clean
• Helps maintain proper airflow and cooling performance
• Replace if torn, warped, or excessively soiled
• Common symptoms: weak airflow, reduced cooling, or a filter that won't stay seated

• 1 air filter

• Disconnect power before opening the front panel
• Open the grille/access panel, remove the old filter, and note its orientation
• Slide the new filter fully into the track; ensure it sits flat and secure
• Do not operate the air conditioner without a filter; follow the owner's manual for care

Black

Color: tan. Measures about 1-1/2 inches in diameter.

This replacement air filter for room air conditioners traps dust and lint before they reach the coils and blower, helping maintain airflow and cooling performance when the original filter becomes clogged, damaged, or missing.

• Captures dust and lint from return air to protect internal components
• Helps maintain proper airflow for consistent cooling
• Reduces debris recirculation into the room
• Replace if torn, warped, or permanently clogged; symptoms can include weak airflow, longer run times, and poor cooling

• Disconnect power before servicing the unit
• Open or remove the front grille per your model's design
• Slide out the old filter; insert the new filter in the same orientation until fully seated
• Restore power and check airflow

This drive PWB supplies and regulates power to a driven component in your appliance, ensuring the motor receives the correct signals for smooth, reliable operation and restoring function when the original board fails.

• Provides regulated power and control signals to a motor or actuator
• Interfaces with the main control to manage operation
• On-board components help protect the circuit from faults
• Common symptoms of a failing board: motor won't run or is intermittent, only one speed works, erratic surging, or visible burn marks/clicking from the board area

• Disconnect power before servicing; verify no voltage is present
• Handle the board by the edges and avoid static discharge
• Photograph/document all connectors; transfer them one at a time
• Reinstall using original hardware; keep wiring clear of moving parts

This transformer converts incoming household voltage to the specific levels needed by your appliance's circuits and components. Replacing a failed unit restores stable power delivery so controls and critical loads operate correctly and safely. What it does

• Steps line voltage up or down to supply connected circuits
• Provides isolated, stable power for control or heating components
• Failure symptoms include: unit won't power on or run, internal fuse repeatedly blows, loud humming/buzzing, or signs of overheating near the transformer

• 1 transformer assembly

• Disconnect power at the breaker and before servicing
• Label or photograph wire locations and move leads one at a time to matching terminals
• Inspect related fuses, wiring, and connectors before reapplying power

This replacement air filter helps reduce odors and keeps the refrigerator interior smelling fresher by filtering refrigerator air circulation. It installs in the cabinet air path and is a direct-fit replacement when specified by your model. What it does:

• Traps and helps reduce common food and household odors in the refrigerator compartment
• Helps maintain fresher-smelling interior air, improving overall storage conditions
• Restores designed air circulation where a clogged or missing filter causes noticeable odors
• Simple passive filtration—no electrical connection or electronics

• Install in the designated refrigerator cabinet/filter slot per the owner's manual; orientation may matter
• Remove old filter and dispose of properly before installing the new filter
• Use gloves if desired; avoid forcing the filter into place to prevent damage

This refrigerator water filter cartridge replaces a clogged or expired filter to help improve the taste and clarity of drinking water and ice. It provides basic carbon filtration to address common taste and odor issues. What it does:

• Filters water for the dispenser and ice maker to help reduce common taste and odor problems.
• Helps trap sediment and particulates that can cloud ice or affect flavor.
• Restores proper water flow and dispenser performance when an old filter is restricted.
• Supports fresh-tasting drinking water between scheduled filter changes.

• Turn off the water supply to the refrigerator per the manufacturer's instructions before replacing the filter.
• Remove the old cartridge following OEM guidance; install the new filter until it seats or clicks into place.
• Flush the new filter by dispensing water until it runs clear.
• Inspect for leaks after installation and replace on the schedule recommended by the refrigerator manufacturer.