Room Air Conditioner Parts

This refrigerator water filter cartridge replaces a clogged or expired filter to help improve the taste and clarity of drinking water and ice. It provides basic carbon filtration to address common taste and odor issues. What it does:

• Filters water for the dispenser and ice maker to help reduce common taste and odor problems.
• Helps trap sediment and particulates that can cloud ice or affect flavor.
• Restores proper water flow and dispenser performance when an old filter is restricted.
• Supports fresh-tasting drinking water between scheduled filter changes.

• Turn off the water supply to the refrigerator per the manufacturer's instructions before replacing the filter.
• Remove the old cartridge following OEM guidance; install the new filter until it seats or clicks into place.
• Flush the new filter by dispensing water until it runs clear.
• Inspect for leaks after installation and replace on the schedule recommended by the refrigerator manufacturer.

This replacement plug/cap seals an unused opening or access hole on compatible Frigidaire appliances to stop drafts and moisture while keeping internal components secure. It restores a finished appearance and prevents debris from entering. What it does:

• Seals access holes or service openings to help prevent water or air intrusion
• Secures wiring or tube routing by closing unused ports
• Helps keep out dust, pests and debris from internal compartments
• Common symptoms indicating replacement: missing or loose plug, visible gap, or water/draft at the opening

• One replacement plug/cap, as shown

• Disconnect power to the appliance before beginning any work
• Typically installs as a press-fit or snap-in component; no special tools required
• Inspect surrounding area for damage before installing; do not force into place

A handheld replacement remote that restores convenient, wireless control of your appliance's basic functions — power, mode, temperature and fan settings — without needing to access the control panel directly. What it does:

• Sends wireless commands to the appliance to change power, temperature, fan speed and operating mode
• Replaces a lost, damaged or non-working remote to restore remote operation
• Helps diagnose remote-related control issues by providing a working transmitter for testing
• Works with the appliance's front-panel receiver; operation depends on line-of-sight and fresh batteries

• Install fresh batteries before first use and follow the appliance manual to pair or sync if required
• Point remote at the appliance's IR/receiver window and test functions at close range first
• Keep remote dry and avoid dropping; handle electronic parts with care
• Dispose of batteries and packaging according to local regulations

This drain kit replaces a damaged or clogged drain assembly to restore proper water removal from the appliance, helping prevent pooling and reduce leak risk. Designed to match OEM fit for straightforward replacement. What it does

• Channels melt or condensate water away from the appliance to the designated drain location
• Replaces cracked, split, or clogged drain tubing and worn fittings
• Helps stop minor leaks and water buildup that can cause odors or operational issues
• Restores proper drainage function after damage or wear

• Disconnect power to the appliance before starting any repairs; follow all safety precautions
• Basic hand tools are typically required; refer to the appliance service manual for step-by-step guidance

This control base assembly is the molded housing that holds the appliance's user-interface components. Replacing a damaged base restores proper alignment and secure mounting of the control board, switches, and display for dependable operation.

• Provides structural support and mounting points for the control board, switches, and display in the control area
• Keeps buttons/knobs aligned for smooth, consistent actuation
• Helps protect and organize wiring within the control panel
• Typical symptoms: cracked or broken housing, loose or sunken controls, buttons sticking or not lining up, rattling/vibration from the control area

• Disconnect power to the appliance before servicing
• Remove the control panel/console to access the base; retain screws and clips for reuse
• Transfer existing control components and wiring to the new base in the same positions
• Avoid overtightening screws into plastic; verify button travel and alignment before reassembly

This main control PWB is the appliance's primary electronic control board that manages user inputs and cycle functions, restoring normal control when a faulty board causes operational issues. What it does:

• Receives user commands and runs appliance control algorithms
• Powers and updates the touchpad/display and indicator lights
• Manages timing, relay switching, and communication with sensors
• Common symptom: appliance won't start, has a blank or erratic display, or shows control-related error codes
• Helps correct unresponsive buttons, intermittent operation, or unexpected cycle behavior when board failure is confirmed

• Disconnect power (unplug or shut off breaker) before accessing the control board
• Handle the PWB by its edges and avoid static discharge; use ESD protection if available
• Refer to the appliance wiring diagram and service manual for proper connector placement and safety procedures

A handheld replacement remote control that restores convenient, wireless operation of your appliance's basic functions. Use it to power the unit on/off and change settings from across the room without touching the control panel. What it does:

• Sends wireless commands to the appliance to control power, temperature, fan speed, and mode selection.
• Replaces a lost, damaged, or unresponsive remote to regain full remote operation.
• Uses standard batteries.

• Insert fresh batteries before first use and follow the appliance's pairing or sync procedure if required.
• Keep remote dry and avoid dropping; do not attempt to open or service the remote—replace if internal damage is suspected.
• Dispose of batteries properly and remove batteries if storing the remote for extended periods.

A rubber compressor cushion that isolates the compressor from the refrigerator chassis to reduce vibration and prevent metal-on-metal contact. Replaces worn or missing cushions to help minimize noise and vibration transfer. What it does:

• Cushions the compressor to dampen vibration and reduce rattling or buzzing noises.
• Keeps the compressor from directly contacting the cabinet, preventing wear and chafing.
• Helps maintain proper compressor positioning and reduces stress on mounting components.
• Common symptom: increased compressor noise or vibration, or visible worn/deteriorated cushion.

• One compressor cushion (rubber mount).

• Disconnect power to the appliance before starting any repair.
• Support the compressor or secure the unit when removing/replacing mounts to avoid strain.
• Remove the old cushion and press the new cushion into place; no refrigerant handling required.
• Use basic hand tools and wear gloves.

A fan motor run capacitor that helps the appliance fan start and maintain smooth operation. Replacing a failed capacitor restores proper airflow and can help recover normal cooling performance when the original part wears out. What it does:

• Provides the phase shift and stored energy needed for the fan motor to start and run reliably.
• Common symptoms of a failing capacitor: fan not starting, fan humming or running intermittently, reduced airflow, or poor cooling performance.
• Used where a dedicated run capacitor is required for the appliance fan motor.
• Does not include installation tools or wiring harnesses.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Capacitors can hold a charge; discharge safely before touching terminals or disconnecting wires.
• Note terminal wiring positions (take a photo) to ensure correct reconnection.

This safety device protects the compressor by interrupting power if it overheats or draws excessive current. Replacing a weak or failed protector restores reliable starts and helps prevent nuisance shutdowns and compressor damage.

• Opens the compressor circuit during overheat/overload to prevent motor damage
• Common symptoms include: compressor won't start, clicks and briefly hums, or starts then quickly shuts off
• Can contribute to poor cooling while fans or controls still operate
• Visual clues may include heat discoloration or damaged terminals at the protector

• Disconnect power before servicing; capacitors in the system can retain a charge—discharge safely
• Access the compressor terminal cover; note wire locations and remove the old protector
• Inspect terminals/connectors; replace any burnt or loose spade connectors for a secure fit
• Fully seat the new protector on the compressor terminal and reconnect wires firmly; check any companion start relay or capacitor if symptoms persist

This electronic control board regulates oven and range functions, interpreting user inputs and controlling displays, timers, heating elements and relays for reliable cooking cycles. Replaces a failed or unresponsive console control to restore normal operation. What it does:

• Receives button/knob signals and sends commands to heating elements, broil/convect systems, timers and indicators
• Drives the display and status indicators so controls and temperature readouts appear correctly
• Controls cycle timing and safety interlocks to enable proper oven operation
• Common signs of failure: blank or erratic display, unresponsive buttons, error codes, or heating elements that won't turn on

• One electronic control board

• Disconnect power at the fuse/circuit breaker before beginning work
• Handle the board carefully to avoid static discharge and physical damage
• Installation typically requires removing the console or control panel; keep fasteners and wiring organized

The Cover for the Remote Control is an OEM replacement part for Frigidaire air conditioners. This cover serves as a protective shield for the remote control sensor, ensuring that the sensor remains intact and free from dust, debris, or physical damage. It helps maintain the proper function of the remote control by ensuring that signals are transmitted effectively between the remote and the air conditioner unit.

A damaged or malfunctioning cover can result from wear and tear over time, physical impact, or exposure to environmental elements. These issues can interfere with the sensor's ability to receive commands from the remote, causing operational difficulties.

Symptoms of a bad cover include:

• The remote control not working properly
• Poor response from the air conditioner to remote commands
• Visible damage or cracks on the cover

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This adapter is a small connector used to join compatible appliance lines or fittings, restoring a secure connection and preventing leaks or loss of function. It's a direct replacement when the original adapter is cracked, corroded, or damaged. What it does

• Connects two mating hoses, tubes, or fittings to re-establish a sealed pathway
• Restores proper flow and helps stop leaks from worn or broken adapters
• Commonly used where a compact, durable coupling is required
• Works as a like-for-like replacement when the original adapter is missing or damaged

• One adapter

• Disconnect power and shut off water or supply lines before servicing
• Verify matching thread type/orientation before installation to avoid cross-threading
• Hand-start threads, then tighten to manufacturer torque; do not overtighten
• Inspect for leaks after restoring power/supplies and running the appliance

This curtain assembly replaces the inner door curtain on compatible GE over-the-range and countertop microwaves to restore the door's interior cover and help maintain proper operation and shielding. It's a direct-fit replacement sold individually. What it does:

• Replaces a cracked, warped, or missing inner door curtain that can expose internal components
• Helps restore the door interior, which can reduce visible light leaks and improve door integrity
• Addresses issues such as rattling or loose interior door panels during operation
• Compatible with service procedures that require removing and replacing the door inner curtain

• 1 curtain assembly

• Unplug or disconnect power before starting any repair; service only with unit de-energized
• Handle door components carefully to avoid damaging glass, seals, or the new curtain
• Removing the outer door and/or inner door liner may be required;