Dryer Push Button Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406105
Dryer won't start or runs with door open? This door switch assembly detects when the door is closed. Easy 10-15 minute repair with step-by-step video.
Do-It-Yourself Stories from Customers like You
Roper dryer stops working then heater runs in all cycles including no heat Eric L. • Hendersonville , TN • January 12, 2015
Background:
Roper Electric Dryer model REX6634RQ0 purchased new in early 2006 by my wife. Dryer use profile is low to moderate as it was used by only one person (working from home) from 2006 to late 2007 then moved and stored in a dry basement until mid 2009. Moved and used by primarily just two people (plus occasional children visits) from mid-2009 thru late 2011 with three moves involved with in that time. Then stored in a dry shipping container until moved again in 2013. The multiple...
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Ge part
By: Ge
Part Number: WE03X25285
Replace your dryer's control knob when broken, cracked, or stripped. Mounts to the control panel for selecting cycles and settings on GE dryers.
Do-It-Yourself Stories from Customers like You
Timer on dryer became hard to turn and kept breaking the knob. Paul B. • Pompano Beach , FL • January 13, 2021
Replaced the timer and knob.
Read more
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
Genuine Ge part
By: Ge
Part Number: WE01X20374
Replacement timer knob for dryer control panels. Installs on the timer shaft to set drying times and select cycles. Order if original is cracked or broken.
Do-It-Yourself Stories from Customers like You
Stripped timer knob on my dryer. Jamie P. • Lake Quivira , KS • June 03, 2017
Live chatted with AppliancePartsPros to verify the correct replacement part. Ordered on line and received the knob the following day! So easy and saved $15.
Read more
More
$32.50
- Compare At:
-
$38.35
- You Save:
-
$5.85
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169313
Dryer won't start or runs with door open? This door switch kit restores safety shutdown function. Simple clip-in repair takes 15-30 minutes. Video included.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
-
Will not tumble
See more...
Do-It-Yourself Stories from Customers like You
Broken timer knob worn out door switch Kurt H. • Quakertown , PA • January 01, 2016
The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum.
The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This...
Read more
More
$24.68
- Compare At:
-
$29.62
- You Save:
-
$4.94
Genuine Ge part
By: Ge
Part Number: WE4M415
Dryer won't start or humming when you press start? The door switch signals when the door is closed. Easy 15-minute DIY repair with basic tools.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Push start switch on ge dryer Michael S. • Carlsbad , CA • February 26, 2017
I was trying to troubleshot a problem I had with my GE dryer not starting. I went to AppliancePartsPros.com because they have excellent DYI videos on how to make repairs. I determined that the problem was in the push start switch. I ordered the switch online and it took 3 days to arrive. It took 5 minutes to replace the switch and the dryer works perfectly.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977456
Dryer won't start when button pressed? The push to start switch sends the signal to begin the cycle. Simple 10-minute fix with basic tools.
Do-It-Yourself Stories from Customers like You
Push button start as soon as you let go of button dryer would stop Richard S. • Poultney , VT • February 27, 2016
Replaced the duct tape with a new switch
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001621
The timer knob skirt is the decorative ring around your dryer's timer control. Replace if cracked, broken, or stripped, preventing proper cycle selection.
Do-It-Yourself Stories from Customers like You
My timer dial would not turn… Sharon L. • Arden , NC • July 22, 2014
I research it online and found that my timer knob skirt was cracked, watched the video online to see how to fix it, ordered the part………it came within 2.5 days. I followed the instruction on the video and was able to fix it myself. I love that I am able to fix things like this myself, I will use this site again for my next repair needs.
Thank you
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Ge part
By: Ge
Part Number: WE1M964
Timer knob assembly for dryers. Installs on the control panel to operate the timer dial. Replace if cracked, broken, stripped, or won't grip the shaft.
Do-It-Yourself Stories from Customers like You
Broken knob Michael M. • Fair Lawn , NJ • July 16, 2014
Remove and replace
Read more
More
$33.70
- Compare At:
-
$40.44
- You Save:
-
$6.74
Genuine Ge part
By: Ge
Part Number: WE01X20380
The Control Knob is an OEM part for GE dryers. It attaches to the front panel and allows users to set and control various dryer functions such as temperature, timing, and drying modes. This knob provides a simple interface for user interaction, ensuring ease of use and accessibility.
Symptoms of a bad Control Knob include:
- The knob slipping or failing to engage with the appliance’s settings,
- Difficulty in turning or adjusting the settings,
- The knob breaking or coming off completely.
Causes of control knob failure typically include physical damage from impacts, degradation from overuse, or environmental factors that can weaken the plastic, such as excessive heat or humidity.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Knobs are weak keep breaking because the timer switch has a lot of tention to turn Tim L. • Ottawa , IL • August 13, 2015
I would remove the knobs from the other switches to replace the timer one when it would break until all the knobs were broken. My wife kept blaming me for being a brute but i swear i was gentle when turning the knob. i ordered all new ones and guess what...the new knobs are reinforced with a metal ring to keep the plastic from splitting. guess it wasn't shear brute strength after all and just a inferior part..
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8536939
Secures control knobs to the panel on washers and dryers. Replace if the clip is broken, missing, or worn, causing knobs to fall off or sit loose.
Do-It-Yourself Stories from Customers like You
Washer would not start due to non working lid latch Corrinne E. • Batavia , IL • September 27, 2019
I purchased the lid latch assembly and the lid switch strike. Following the clear video instructions for each part, my handy teenage son was able to remove the lid latch assembly and replace it with the new part as well as the lid switch strike. The washer is back to working perfectly for under $100. Appliance Parts Pros carry the parts to repair and at a lower cost than other online retailers. I saved about $30 compared to the other online site and I saved a service call fee. I'm so glad I...
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 134398300
Dryer won't start when you turn the knob? A faulty start switch prevents the motor from engaging. Simple 5-10 minute DIY fix with basic tools required.
Do-It-Yourself Stories from Customers like You
Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch Lisa I. • Cocoa , FL • December 13, 2015
Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let...
Read more
More
$63.65
- Compare At:
-
$75.74
- You Save:
-
$12.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398095
Dryer won't start when you press the button? A faulty start switch is often the cause. This switch initiates the drying cycle. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Clothes dryer woundnt start start switcw n/g John S. • Cutchogue , NY • May 17, 2014
Remove and replace
Read more
More
$66.78
- Compare At:
-
$80.14
- You Save:
-
$13.36
Genuine Samsung part
By: Samsung
Part Number: DC64-00828B
Dryer won't start or keeps running with door open? The door switch detects door position for safe operation. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
I accidentally stepped on the door of my Samsung dryer. The door is intact but brackets bent. Margaret C. • Tampa , FL • June 07, 2018
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year...
Read more
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Genuine Ge part
By: Ge
Part Number: WE01X23599
Control knob for washer and dryer settings selection. Mounts on control panel. Replace if broken, cracked, loose, or missing for proper operation.
Do-It-Yourself Stories from Customers like You
Knob broke. Renee H. • Durham , NC • December 20, 2019
Once the knob came I just put it on. It works well.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Ge part
By: Ge
Part Number: WE04X24719
Replacement start button for dryer control panel. Installs on front console. Needed when original button is cracked, broken, or won't depress properly.
Do-It-Yourself Stories from Customers like You
The start button broke. Doug S. • Tyrone , NM • January 13, 2024
The start button broke?!? I ordered another start button and it looked exactly like the one I had. I figured it would break as well, so I might as well try to fix the broken one.
I unplugged the power, removed the back of the dryer console, disconnected the start switch from the button and the dryer, depressed the 3 pop out tabs to remove the button from the dryer.
I put the switch back in place and reinstalled the back.
I clipped off the 3 projections that kept the button from being...
Read more
More
$29.61
- Compare At:
-
$35.53
- You Save:
-
$5.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756270
The Knob Kit is an OEM replacement part for Whirlpool washing machines and dryers. Including a set of premium knobs color-matched to the appliance controls, this kit restores complete interfaces whenever old or damaged buttons need replacing. The kit includes 1 timer knob and 3 control knobs.
Causes for replacement involve normal wear from repeated touching during cycles as well as impact damage from falls or button presses gone awry over many years of service.
Symptoms necessitating a new knob kit include:
- Cracked, broken or missing buttons impeding normal operations
- Loosened knobs slipping out of holes or wearing partial turns
- Discolored faded markings obscuring switch positions
This OEM Whirlpool part is also compatible with Maytag, Amana, and other major brands.
Do-It-Yourself Stories from Customers like You
The timer knob stripped. Karen W. • Omaha , AR • January 24, 2022
After searching and watching videos, I determined that the only way to fix my dryer was to replace the entire timer. I also needed a new knob for the timer. Unfortunately, you can not purchase just 1 knob, you have to purchase a package that contains 1 of each of the knobs on the panel.
The repair was very easy! There was a video on the AppliancePartsPros website that showed exactly how to make the repair. You do not have to be an expert to make this repair.
Read more
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58