Refrigerator Nut Damper Control Refrigator Parts

I removed to the cover to the coil, defrosted coil with a heat gun and checked the heater strip resistance. I set timer to defrost by hand to make sure everything was working. There was damage to the temp control sensor. Both parts were on your web site at a good price, ordering was easy. The parts were in the mail two days later. A screwdriver and nut driver were the only other tools other than a multi meter. Parts installed in five min. I had the option of talking with a pro !!! Read more

• Fridge too cold
• Fridge runs too long

I went on you tube to try and figure out what might be causing this problem. It seemed that the problem was either the temperature thermostat or the defrost timer. I figured that seeing as I had never ever seen any frost in the freezer that the problem probably wasn't the defrost timer. So I ordered the temperature control thermostat, received it the very next day and in ten minutes removed the old one and installed the new one and we were good to go. It's been working just fine for the last... Read more

Replaced the damper control. It took only 10-15 minutes. Since replacement, the clicking noise has stopped. Very happy with the result. However, want to share that there was probably nothing wrong with the original damper other than the original faulty design. The flap opens and closes and believe the clicking noise was the result of plastic against plastic. Noticed the new damper control is exactly the same as the original except that one of the flap sides now has a thick piece of rubbery... Read more

GE Dishwasher would beep intermittently over the course of about a month. It then began to shut itself off. I would have to reset the breaker to get it to come on. Eventually, it stopped working altogether. After confirming that I did in fact have proper power to the appliance. The main control board had power and was in good shape. I then traced the problem to being a bad UI board. Which I found with the help of a nice lady over the phone at AppliancePartsPros.com. Read more

• Won't start
• Fridge runs too long
• Frost buildup
• Fridge too warm

After reviewing a number of testimonials and your videos from your APP.com site I determined my most likely problem was either the defrost heater, thermostat, timer or possibly all three. The real challenge now began. Getting to the specific parts with my specific model number was a real challenge. It was not as easy as removing the light guard and 5 screws since my model had two Track Cant Shelf vertical rails restricting the removal of the back panel. Also, these rails could not be removed... Read more

The bar retainers just snapped in and the door handle can be replaced with three screws. Took about 5 minutes total. Read more

Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick... Read more

Given all the symptoms, we figured that the control board went out. First, unplug the refrigerator. The control board was easy to access by removing a panel on the back of the fridge. I unplugged all the connectors and used a putty knife to release the board from the plastic retaining clips. There was some browning on the underside of the board and the back of the refrigerator that suggests one of the capacitors on the board blew. Install the new board by pressing it into the retaining clips... Read more

Replaced with an OEM panel from you. Easy fix. All is good now. Fair price. Read more

After watching several YouTube videos on similar problem, I decided to replaced the air diffuser. Read more

• Fridge too warm
• Noisy

I determined that the motor that drives the damper valve that allows cold air into the refer was noisy. I ordered the replacement part from AppliancePartsPro.com. It arrived within 3 days and I changed the units out, which took about 10 minutes total. All is quiet with the refer now. Read more

• Won't start

I am a 76 year old woman and hesitated to tackle the job. But my son sent me a Utube video "how to replace the board," and I was able to replace it, surprisingly, quite easily. I could have done it in a shorter period of time, if I had not been challenged with these arthritic hands and fingers. The refrigerator is now holding the temperatures quite nicely. Joan Read more

Installed a new user interface assembly Read more

• Door won't open or close

My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more

I went on line and read your advice page. Based on that, I removed the damper assembly (six screws counting the miserable light fixture) and found the damper door broken as predicted. I went back to your page and ordered the new part. Nice breakdown to get number. After that, I disassembled the damper assembly, found that the ABS plastic damper had broken from the actuator probably as a result of fatigue from cycling back and forth for twelve years. I used super glue to re-attach the damper... Read more

Ordered two boards which were indicated as the possible problem. I took detailed pictures of each board before removing to assure I was reconnecting all the connections correctly. I used a long set of needle nose pliers to remove each connector. The tricky part was trying to figure out how to remove the boards. So far when I experience a power loss the frigid has successfully restarted. Fingers crossed!! Read more