Washer Range/Range/Oven Surface Element Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003361
Fix a washer that won't advance through cycles, fills but won't spin, or stops mid-cycle. This timer controls wash, rinse, and spin sequences. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Washing machine would not complete all of it's cycles David G. • Ballwin , MO • February 24, 2017
Replaced the main timer / control.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10337
Fix a washer that won't advance through cycles or stops mid-cycle. This timer controls wash, rinse, and spin sequences. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Ge washer timer knobs cogs wore out Katherine S. • Reno , NV • February 07, 2015
We had to order the entire timer assembly because the part taking the most abuse is plastic. Of course. Watched the video and easily did the repair. Thanks.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946448
Washer won't advance cycles or stops mid-cycle? Timer controls cycle progression. DIY repair if timer knob doesn't advance washing stages properly.
Do-It-Yourself Stories from Customers like You
1994 whirlpool washer model lst8244bq0 not going to spin cycle E R. • Potomac , MD • June 05, 2016
The most challenging part of this was determining what the problem was. At first I thought the clutch (or related parts) had worn out, but by chance, I pulled on the timer knob, and the machine started spinning. When I let it go, it stopped. So clearly the spinning part worked. Then I watched a few videos about repairing a bad timer and determined that it was the likely culprit. I ordered the part. It was very simple to replace. And it worked perfectly. Saved me hundreds either in...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10367632
Noise filter (line filter) that suppresses electrical interference on the washer power line. Protects electronic controls from power surges and reduces EMI. Replace if washer has intermittent operation or won't start.
Do-It-Yourself Stories from Customers like You
Everything was dead no power nothing worked there was power at the plug Duane M. • Batesville , AR • August 08, 2026
Popped the back control panel and checked where the power comes in. Had power. On the other side of that component there was no power. Found the problem. The hardest part was finding where they hid the model number. Up and under the back of the lid. Nice hiding place.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3955340
If your washer won't advance through cycles or stops mid-wash, the timer may be faulty. This control sequences fill, wash, drain, and spin stages.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828
Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle James L. • Brandywine , MD • December 06, 2014
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134640601
Fix a washer that won't start, shows error codes, or won't advance cycles. This electronic control board manages timing and power to components.
Do-It-Yourself Stories from Customers like You
My electrolux front loading washer wouldn't complete a cycle and kept displaying error codes Mark D. • Chattanooga , TN • October 26, 2015
Appliance Parts Pros website helped me determine what part I needed according to the Error code number. I watched the how to video on the website and ordered the electronic control board. The item arrived in just two days! Replacing the board took literally 10 minutes, and the washer now runs flawlessly.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134883600
Fix a washer that won't advance through cycles or gets stuck washing or spinning. This control timer regulates cycle progression. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer on washer Robert W. • Dallas , TX • November 14, 2016
SELF REPAIR, WITH A VIDEO EXAMPLE.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006060
Fix a washer that won't spin, shows error codes, or has unresponsive controls. This main control board coordinates all cycles and functions. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Error code e90 Thomas M. • Janesville , WI • October 07, 2016
I ordered the control board because the old one had many (about 30) opens on the back of the control board and the plastic cover for it was warped. Helpful notes; put front cover on before you connect the wiring. This will save you hours of being mad! All the plugins have different ends, you can't screw it up! Third note, those little plastic light transmitters can be put in wrong and it will not go together. Tabs go in! The one set by the start button can be put in backwards and looks correct....
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137208014NH
Washer won't start, shows error codes, or cycles incorrectly? The control board manages all wash cycles and safety functions. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
E53 error code Susan R. • Beverly Hills , FL • March 03, 2017
After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water...
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: 37922P
If your washer won't advance through cycles automatically and you must turn the knob manually, the timer likely failed. Moderate DIY repair restores function.
Do-It-Yourself Stories from Customers like You
Timer motor going out on my old amana washer Michael R. • Watsonville , CA • July 26, 2015
My mom loves her old Amana washer and AppliancePartsPros.com was the only place that had the part. Replacing the timer is an easy task but I had my repair guy put it in anyway. Some of the screws on the outside cover were so old we cut or used pliers to get them out. Washer is working great. Also ordered my part and got it the next day.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10175553
This mechanical cycle timer controls the sequence and duration of washer operations. Replacing a failing timer restores proper advancement through fill, agitate, drain, and spin so cycles complete reliably with accurate timing. What it does:
- Advances the washer through each step by routing power to the water valves, motor, and drain pump at the correct times
- Sets the length of each stage for consistent operation
- Common failure signs: cycle won't advance or stops mid-cycle
- Timer knob doesn't move or must be jiggled to run
- Skips functions (no agitate, drain, or spin) while others still work
What's included:
- 1 mechanical timer assembly
Install notes:
- Disconnect power before servicing; access the timer from the control console
- Take photos or label wires; transfer them to the new timer one at a time to maintain correct positions
- Reuse the existing knob and dial; align the timer shaft properly and secure the mounting screws
- After reassembly, run a short test cycle to ensure proper advancement
Do-It-Yourself Stories from Customers like You
The washer machine wasn't fallow the timer sequences \denis B. • Miami , FL • January 22, 2016
I replaced the timer and mow is working like mew.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480261
Fix washer won't start, stops mid-cycle, or skips rinse with this electronic control board. Moderate DIY repair with connector-based installation.
More
Genuine Ge part
By: Ge
Part Number: WH03X32138
If your washer shakes excessively or stops mid-cycle, the accelerometer sensor may be faulty. This part monitors vibration levels to regulate spin speed.
More
Genuine Ge part
By: Ge
Part Number: WH12X10254
Fix a washer that won't cycle, skips rinse, or drains while filling. This mechanical timer restores proper cycle sequencing. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Clothes washer not cycling properly sometimes drains while filling for rinse skipping rinse cycle Anthony S. • Bloomsbury , NJ • April 29, 2016
Ordered new control from Appliance Parts Pros and installed it using online repair tutorial. Instructions not exact but close enough to complete replacement in approx. 20 minutes.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137005005
If your washer won't start, keeps beeping, or shows error codes, the control board may have failed. This computer manages all washer functions.
Do-It-Yourself Stories from Customers like You
Washer kept beeping and wouldn't start Gloria O. • Brownsville , TX • July 30, 2016
Changed the control board
Read more
More