Washer Run Vent Push Button Switch Parts
Genuine Ge part
By: Ge
Part Number: WH41X10077
Guides water from the inlet valve into the wash tub. Replace if cracked, broken, leaking, or causing uneven water distribution in your top-load washer.
Do-It-Yourself Stories from Customers like You
Ge top load washer linking along the inside of the outside metal frame Robert L. • Guttenberg , NJ • November 07, 2014
Replaced the hose and water inlet. Part #:
AP3189243 (WH41X10077). This connects the solenoid valves to bring water into the tub.
Read more
More
$13.61
- Compare At:
-
$16.33
- You Save:
-
$2.72
Genuine Frigidaire part
By: Frigidaire
Part Number: 134639920
Connects the outer tub to the drain pump in front-load washers. Replace if cracked, torn, leaking, or clogged to stop water damage and restore drainage.
Do-It-Yourself Stories from Customers like You
E21 water not pumping out fast enough (eiflw55hmb washer) Helmut D. • Rancho Palos Verdes , CA • April 20, 2020
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove...
Read more
More
$88.56
- Compare At:
-
$104.50
- You Save:
-
$15.94
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337780
Washer overfilling or not filling correctly? This water level pressure switch kit fixes fill issues. Includes switch, tube, and clamp. Easy DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overfilling David C. • Pine Mtn. Club , CA • May 09, 2014
Reviewed troubleshooting tips and identified problem as "water level switch".
Watched repair video, which was very helpful.
Ordered part on a Sunday, which arrived the following Tuesday.
Repair was easy the fix was successful.
Read more
More
$62.46
- Compare At:
-
$74.33
- You Save:
-
$11.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399639
Dryer not heating or stuck on one temperature? This temperature selector switch controls heat settings. Moderate DIY repair with video guide available.
Do-It-Yourself Stories from Customers like You
1 no heat on high or low settings and sometimes on medium heat setting 2 no auto cool down Robert H. • Renton , WA • March 11, 2015
I replaced the cycle switch, fixing the lack of heat. The timer switch replacement fixed the auto cool down. I watched a cycle switch replacement on Youtube, demonstrating removal of the top console, which answered the only question I had about the repair. The timer switch was a hundred bucks. The only thing to be said about that is that it was a lot cheaper than a repairman or replacing the dryer.
Read more
More
$59.48
- Compare At:
-
$70.19
- You Save:
-
$10.71
Genuine Lg part
By: Lg
Part Number: 5214ER4001B
Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.
Do-It-Yourself Stories from Customers like You
Little black specks in the dispenser tray calicum build up and rusted clamps on rear of dispenser Paul B. • San Diego , CA • January 30, 2017
I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Lg part
By: Lg
Part Number: 5214FR3188G
The Pump Hose is an OEM replacement part for LG washing machines. It is a flexible tube that connects the pump assembly to the internal tub and spins through the detergent dispenser area. The pump hose is responsible for circulating and removing water during the wash and rinse cycles.
Symptoms of a bad pump hose include:
- Leaks or water not fully draining from the washer
- Slow or inefficient filling and draining of water
- Pump running loudly or continuously
- Wet areas under or around the washer
Causes of failure can be cracks or splits developing in the tubing from repeated bending and flexing over time, or blockages restricting water flow.
It is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain hose cracked Tommy W. • Pensacola , FL • August 18, 2015
REMOVED BACK PANEL, USED PLYERS TO REMOVE CLAMP, PULLED OLD HOSE OFF, REVERSED PROCEDURE TO INSTALL NEW HOSE. TOTAL TIME ABOUT 10 MINUTES.
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Whirlpool part
By: Whirlpool
Part Number: W11501455
The Timer Knob is an OEM part for Whirlpool washers and dryers. It is located on the control panel that allows you to set and adjust the timer for different wash and dry cycles.
A bad timer knob can be caused by regular use, accidental damage, or wear and tear over time. If you notice cracks, a loose fit, or difficulty in turning the knob, it may indicate a problem with the knob itself.
Symptoms of a bad timer knob include:
- Cracked or damaged knob surface
- Loose or wobbly fit of the knob on the control panel
- Inability to set or adjust the timer accurately
Replace your faulty timer knob with this genuine OEM part to restore your appliance.
This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Broken timer shaft Michael H. • Toms River , NJ • July 28, 2025
Replaced timer
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 134592700
Replacement drain hose directs used water from your washer to the household drain. Needed when original hose is cracked, split, or leaking.
Do-It-Yourself Stories from Customers like You
Washer drain hose split in half Will W. • Steele , AL • April 19, 2014
Our washer is next door the bathroom. So when, during the rinse cycle, the hose split and we found the back of the house completely flooded I initially assumed the culprit was either the toilet or the sink or possibly an interdimentional portal into a demonic netherworld of vaguely chlorine scented water. I spent the next hour mopping it all up and checking and re-checking the pipes in the bathroom with no apparent leaks. The next load of laundry left more clues as this time the flood was from...
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81
Genuine Whirlpool part
By: Whirlpool
Part Number: W11044559
The Pressure Switch Hose is an OEM part for Whirlpool washing machines. This hose connects the pressure switch to the washer tub, allowing the machine to detect water levels and ensure proper operation of the washing cycle.
Common causes of damage include cracks, holes, or clogs in the hose, which can occur due to wear and tear, exposure to harsh detergents, or foreign objects in the washing machine.
Symptoms of a bad pressure switch hose include:
- The washing machine not filling properly
- Overfilling or underfilling of water
- Error codes related to water levels
- The washer not advancing through cycles correctly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our 3 year old whirlpool front load washer overfilled and when door unlocked during the cycle the door opened and flooded our floor Robert B. • Blanchardville , WI • August 27, 2016
After watching a number of videos and reading a lot of trouble-shooting discussions online I had ideas of what to look for as possible causes of the overfilling of the drum. I found the water level pressure hose had worn through after contacting the rotor. After temporarily taping the hose, I found the service manual inside the machine so I ran it through it test sequences without any error codes. Suggesting the hose and not the sensor or inlet valves were the problem.
I ordered parts last...
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10114608
The Drain Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub to the drain pipe, facilitating the drainage of water after a wash cycle is complete.
Causes of a bad drain hose can include regular wear and tear, blockages from debris or lint, cracks or splits due to aging, or damage from improper installation or handling. A compromised drain hose can lead to water leaks and drainage issues.
Symptoms of a bad drain hose include:
- Incomplete water drainage after cycles
- Puddles or leaks near the base of the washer
- A blocked or restricted flow through the hose
- Detached or disconnected hose ends
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The drain hose cracked and sprung a leak Linda W. • Mt. Ulla , NC • May 25, 2014
This hose did not just attach to the back of the washer--that would have been too easy. This hose went into the back of the washer, under the tub & attached to the pump at the front of the washer. Both the back & front of the washer had to be removed to access the hose. Luckily the crack was at an external spot where it was easily seen; unluckily my husband was out of town at the time & I had to take the washer apart & put it back together. Actually it was not that hard. Before I took the...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001664
The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.
Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.
Symptoms of a faulty timer knob insert include:
- Knob becomes loose, detached or inoperable for timings scrolling
- Cracks appear exposing internal timer parts
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Ge part
By: Ge
Part Number: WH41X24177
Internal drain hose channels water from washer tub to external drain system. Replace if cracked, kinked, or leaking to restore proper drainage function.
More
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3362624
Replace a cracked, broken, or missing timer knob on your washer. This control knob installs on the timer shaft to adjust wash cycles and settings.
Do-It-Yourself Stories from Customers like You
Broken washing machine timer knob. Steven K. • Bronx , NY • August 28, 2023
I ordered a replacement knob which I received the very next day, and replaced the broken knob.
Read more
More
$33.70
- Compare At:
-
$40.10
- You Save:
-
$6.40
Genuine Frigidaire part
By: Frigidaire
Part Number: 134886700
The Timer Knob Assembly is an OEM replacement part for Frigidaire electric dryers. This assembly incorporates the timer dial, stem, and mounting components that allow users to set desired drying periods.
Causes of a faulty timer knob include wear and tear of internal gears from regular cycle selections. Damage to the outer dial or stem connection points may also occur.
Symptoms include:
- Inability to rotate timer dial through full drying options
- Timer selections not initiating or maintaining set programs
- Dial detaching from the front panel during adjustment
This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, and various Kenmore dryer models as well.
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$51.62
- Compare At:
-
$61.43
- You Save:
-
$9.81
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339326
Fix a washer that overfills, won't fill enough, or stops filling mid-cycle. This water level pressure switch regulates tub fill. DIY repair in 30 minutes.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate and would not fill water Jennifer B. • Kingston , NH • March 13, 2016
At first, I thought, maybe I should just get a new washing machine. After all, it is almost 20 years old! I couldn't bring myself to do that and said to myself, let me see if I can figure out what parts I need and see if I can find a video that tells me how to do it and see how hard it is. I’ve never attempted appliance repair before. After figuring out what the most likely parts were, I ordered the water level switch and agitator cam repair kit - I figured for $10 more, I might as well...
Read more
More
$69.95
- Compare At:
-
$82.54
- You Save:
-
$12.59
Genuine Ge part
By: Ge
Part Number: WH12X10476
Fix washer overfilling or not filling properly. This pressure switch controls water level for proper washing. DIY-friendly, takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Washer was leaking water Jerry M. • Mansfield , TX • June 06, 2014
I thought initially it was a hose because it was leaking water from the bottom. On the small and medium load it didn't leak. I watched it on the large setting and noticed the water didn't shut off initially so therefore it was over filling. I ordered a switch pressure switch from Appliance Parts Pros and received it in two days. I replaced the switch, put the washer together and now it works like new. The wife is very happy to have her washer back working better than ever! Thanks!
Jerry
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11