Washer Timer Control Knob Parts

Color: Blue. For gray order WP8181859.

This washer timer knob attaches to the timer shaft so you can select cycles and start the machine. Replace a cracked, stripped, or missing knob to restore positive engagement and reliable cycle selection.

• Engages the timer shaft to choose wash cycles and settings
• Restores proper feel and control when turning the timer
• Common symptoms: knob cracked or missing, spins without moving the timer, difficult to start or select a cycle
• If the timer can be turned with pliers but not with the knob, the knob is likely worn

• Unplug the washer before servicing
• Pull off the old knob; retain any cap or spring clip from the original if present
• Align the new knob with the timer shaft and press firmly until fully seated
• Rotate through settings to ensure solid engagement

The Timer is an OEM part for Whirlpool washing machines. This component is responsible for controlling the various cycles of the washing machine, ensuring that each phase, from washing to rinsing to spinning, occurs at the correct time and duration.

Causes of a bad timer can include electrical faults, wear and tear on the internal mechanisms, or damage due to power surges or moisture exposure. Over time, these issues can interfere with the timer's ability to accurately manage the washing cycles, leading to performance problems.

Symptoms of a bad timer include:

• The washing machine not advancing through cycles
• Incorrect cycle durations
• The machine getting stuck in one part of the cycle
• Unresponsive or erratic timer controls

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Front load washer control knob. Color: Pewter. For gray order WP8181859. For Biscuit order WP8182049. For blue order WP8181881.

This washer timer is the cycle controller that governs fill, wash, rinse, drain, and spin. Replacing a worn timer restores proper cycle advancement when the washer won't start, stalls mid-cycle, or repeats steps.

• Directs power to inlet valves, drive motor, and drain pump in the correct sequence and duration
• Advances the cycle through fill, wash/agitate, rinse, drain, and spin
• Common symptoms include a cycle that won't start or advance, stops mid-cycle, or no agitation/drain/spin across multiple settings
• Causes intermittent or inconsistent timing between steps

• Disconnect power before servicing
• Open the control console and remove the timer's mounting screws
• Transfer wires to the new timer one at a time, matching positions (take a photo for reference)
• Mount the new timer, attach the existing knob/dial as configured on your model, restore power, and test

This replacement control knob restores smooth, reliable turning on your appliance's control panel so you can select settings accurately again. It's designed to slide onto the control shaft and provide a secure, easy-grip interface. What it does

• Attaches to the control shaft to let you select settings
• Replaces cracked, stripped, or missing knobs
• Helps ensure the switch or valve engages properly when turned
• Improves grip and appearance on the front panel

• 1 control knob

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the new knob with the shaft flats/splines and press straight on without forcing
• Test operation to ensure the knob fully engages the control

This pre-programmed user interface control board assembly manages the buttons and display on your appliance's control panel. Replacing a failed UI board restores responsive controls and accurate indications from the panel. What it does:

• Interprets keypad inputs and drives the display/indicator LEDs
• Sends user selections to the main control for proper operation
• Helps resolve an unresponsive or intermittent control panel
• Addresses blank, flickering, or garbled display behavior

• 1 pre-programmed user interface control board assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD protection; handle the PCB by the edges only
• Photograph wiring and ribbon connections; match keyed connectors and orientation on reassembly
• Reuse existing mounting hardware, trim, and overlays as needed; ensure all harnesses are seated before restoring power

This mechanical timer controls the wash-cycle sequence on top-load washers—coordinating fill, agitate, drain, and spin. Replacing a failed timer restores proper cycle advancement and reliable start/stop so each step runs at the correct time.

• Controls the timing and order of fill, wash/agitate, drain, and spin functions
• Switches power to the motor, pump, and water inlet valve at the proper moments
• Common failure symptoms: cycle won't advance or stops mid-cycle; skips agitate or spin; runs past the end of the cycle
• Knob doesn't advance or must be manually turned to proceed between steps

• Disconnect power before servicing; turn off water if you'll be moving hoses
• Access through the control console; photograph wiring and transfer connectors one at a time to matching terminals
• Mount the timer securely and align the shaft with the knob/dial—do not force the shaft
• Reassemble the console and run a test cycle to proper advancement

This control board is the appliance's primary printed circuit board. It governs cycle timing, options, and power to key components. Replacing a failed PCB can restore responsive controls and consistent operation across all cycles.

• Coordinates inputs from sensors/controls and directs outputs to motors, valves, pumps, and other loads
• Manages cycle sequencing and option selections as designed by the manufacturer
• Symptoms of a failing board can include no start/no response, cycles that won't advance or end early, intermittent/erratic operation, blank or flickering indicators, or recurring error codes

• Disconnect power before servicing; do not work on a live appliance
• Use ESD protection and handle the board by the edges to avoid damage
• Photograph existing wiring; move connectors one at a time to the matching positions on the new board
• Secure the board and any covers before restoring power; run a test cycle/diagnostic per your model's service information

This control knob assembly replaces a worn or broken knob on your washer's control panel, restoring positive engagement with the control shaft so you can accurately select cycles and settings without slipping, wobbling, or misalignment.

• Attaches to the control shaft to select wash cycles and options
• Provides a secure grip and pointer alignment for accurate settings
• Restores proper feel to the dial and prevents free-spinning

• Disconnect power to the washer before servicing
• Pull the old knob straight off the shaft; if tight, gently pry while supporting the panel
• If a spring clip or insert is present on the old knob, transfer it to the new knob
• Align the flat/D-shaped hub with the shaft and press firmly until fully seated; verify pointer alignment

This coin chute guides coins from the slide into the coin mechanism so the machine can register payment and begin a cycle. Keeping the chute intact and aligned helps prevent jams and misfeeds in coin-operated laundry equipment.

• Directs coins from the slide to the coin mechanism to register payment
• Helps ensure smooth coin drop, reducing bounce-back and misfeeds
• Common fix when coins jam, fall into the cabinet, or the unit won't start after payment
• Replace if cracked, bent, corroded, or missing

• Disconnect power; shut off gas before service
• Open the coin housing/slide assembly and retain existing hardware
• Install the new chute in the same orientation; align with slide and mechanism, then secure
• Test with sample coins to ensure proper drop and operation before returning to service

This is a washing machine timer. This part controls the electrical components and the duration of the unit's cycles.If the washing machine unit will not run through the drain or spin cycles, it is possible that the timer has gone bad and will need to be replaced. Some users report the washing machine running through the washing cycle fine until it is time to drain or spin. The replacement steps are fairly easy and can be done quickly. Be sure to unplug the washing machine from its power source before starting the replacement process. Some people may wish to wear work gloves during this process to protect their hands from scratches or other injuries.This specific timer is compatible with washing machines that are manufactured by the Whirlpool brand. It is sourced right from the manufacturer as a high-quality and durable part. It is sold individually.

Restore accurate cycle control with this washer timer. It sequences power to the drive motor, pump, and water inlet valves so the machine fills, washes, drains, and spins at the proper times.

• Advances the cycle through fill, wash, rinse, drain, and spin stages
• Sends power to the motor, pump, and inlet valves in the correct order and duration
• Safe symptoms: washer won't start, won't advance, stops mid-cycle, runs indefinitely, or skips rinse/spin
• Helps when cycles stall or the dial turns without moving the cycle forward

• Unplug the washer before servicing
• Open the control console to access the timer; note or photograph wiring
• Transfer wires one at a time to matching terminals on the new timer
• Reuse your existing knob/dial and mounting hardware; align the timer shaft before tightening

The Timer is an OEM part for SpeedQueen washing machines. It controls the duration of the wash cycles, ensuring each phase of the cycle is completed in the correct sequence. This includes washing, rinsing, and spinning, providing precise control over the washing process for optimal results.

Over time, the timer can become faulty due to electrical issues, wear and tear from repeated use, or internal component failures. When the timer malfunctions, it can disrupt the washing machine's ability to complete cycles correctly.

Symptoms of a bad timer include:

• The washer not advancing through cycles
• Cycles that are too long or too short
• The machine stopping mid-cycle
• Inconsistent or erratic timing of cycle phases

This OEM part ensures reliable performance and compatibility with SpeedQueen washing machines.

This control knob attaches to the appliance's control shaft so you can select settings with a solid, positive feel. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, finished look.

• Attaches to a switch or valve shaft to select temperatures, burner levels, or cycles
• Transfers your hand turn to the control shaft for accurate setting changes
• Common symptoms: cracked hub, spins without engaging, wobbly/loose, falls off, or missing
• Helps maintain a uniform appearance across the control panel

• Disconnect power (and shut off gas, if applicable) before servicing
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the insert with the shaft's flats or splines and press straight on until fully seated
• Match position- and finish-specific knobs to the original on models that use different knobs per location

Color: Bisque. For white order WH01X10310. This knob includes the push on clip that attaches the knob to the switch. Removal can be done by pushing the clip under the knob with a very small flat head screw driver.