Washer Bath Fan Light Socket Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263
Illuminates the dryer drum for better visibility when loading and unloading. Replace when bulb burns out or fails to light. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019
Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking.
I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was...
Read more
More
$15.55
- Compare At:
-
$18.50
- You Save:
-
$2.95
Genuine Whirlpool part
By: Whirlpool
Part Number: W11683243
Replace your refrigerator's LED light module when lights flicker, dim, or fail. Restores full interior illumination. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Freezer light went out and was causing 1/2 fridge lights to be out too. Christopher R. • Carrollton , TX • December 06, 2020
Ordered the part, which was easy and smooth. Watched you tube video on how to repair. Took me 15 minutes. Easy as it could be.
Read more
More
$151.48
- Compare At:
-
$181.78
- You Save:
-
$30.30
Genuine Lg part
By: Lg
Part Number: 6631EL3003B
Dryer won't auto dry or cycles run too long? This moisture sensor wire harness connects sensor bars to control. Restores accurate dry cycles. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Lg dryer (12 yrs old) would dry for a while on any heat setting then shut completely off stay off no power complete black out then after 20 30 minutes come back on George C. • Kingwood , TX • August 30, 2015
I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: 279318
Includes screws and wire connectors. For the complete terminal block kit use 279320.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Loose wire in back caused a short and burned out plug insulator etc William W. • Pottsboro , TX • February 15, 2019
I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great.
Read more
More
$58.43
- Compare At:
-
$69.53
- You Save:
-
$11.10
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Lg part
By: Lg
Part Number: 6877ER1016B
The Motor Wiring Harness is an OEM replacement part for LG washing machines. It is responsible for supplying power from the washer control board to the motor and related components. The wiring harness conducts electrical current, allowing for the operation of the pump, motor, and other vital systems.
Causes of a bad motor wiring harness can include damage due to repetitive use and wear over long periods of time, exposure to moisture, impact or abrasion damage, or faulty insulation leading to electrical shorts.
Symptoms of a bad motor wiring harness include:
- The washer failing to start or functioning intermittently
- Strange noises coming from the motor or other electrical components
- Slow or ineffective spinning or agitation
- Error codes displayed on the control panel
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Le error on lg wm2277hw Thomas S. • Hanover , MA • November 29, 2014
Replaced Hall sensor and wiring harness. Very simple fix. So far, so good...!
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Lg part
By: Lg
Part Number: 6877ER1016F
Washer won't spin or shows LE error? A faulty motor wire harness disrupts power to the drum motor. DIY fix in 20-60 minutes with basic hand tools.
Do-It-Yourself Stories from Customers like You
The thermal sensor was bad leading to the stator motor overheating John S. • Lower Burrell , PA • March 05, 2016
I replaced the rotor and stator motor assembly.
Read more
More
$57.95
- Compare At:
-
$68.38
- You Save:
-
$10.43
Genuine Lg part
By: Lg
Part Number: AGM30045803
This washer clutch assembly engages the drive system to shift between wash and spin modes. Replacing a worn clutch restores smooth agitation and full-speed spin performance, reducing noise and leaving clothes properly wrung out at cycle end.
- Engages and disengages the drive to transition between wash/agitate and spin
- Transfers motor torque to the basket during wash and spin
- Worn clutch can cause weak or no spin
- May result in no agitation or intermittent shifting
- Can cause grinding/scraping noises and leave clothes wet after the final spin
What's included: 1 clutch assembly
- Unplug the appliance and shut off water before starting
- Access from the bottom; support the washer securely to prevent tipping
- Remove obstructing drive components to reach the clutch; note hardware/wire routing for reassembly
- After installation, rotate the basket by hand and run a quick test cycle to confirm proper operation
Do-It-Yourself Stories from Customers like You
LG clothes processor recently became very loud on spin cycles. Intermittent unbalanced load error. Mika T. • Northfield , MN • March 29, 2022
After doing a little research it seemed likely that our 7 year old LG's suspension system was getting old. We're getting very loud sounds on our spin cycle. A lot of start-up of spin and then stopping to rebalance occurring within the machine and intermittent unbalanced load error where the machine stopped the cycle completely to display an error. We replaced all three shock absorbers and the two suspension springs and our washer is back to what seems like better than new. Quieter with...
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7730P011-60
Indicator light lens covers the pilot lamp opening on your range control panel. Replace when cracked, discolored, or missing to restore visibility.
Do-It-Yourself Stories from Customers like You
2 maytag smooth top stove burners were not turning all the way on Pamela R. • Indianapolis , IN • March 25, 2018
Purchased the triple burner and dual burner element. I added my model of stove and I was able to pull up diagrams of the stove parts. The parts were easy to find using the diagrams and the burner elements were marked 17 & 15 so I placed my order. Parts were here in a couple of days. The tricky part was figuring out how to get into the stove top. I was a few youtube videos to see different replacement. My husband and I got the stove top off and flipped it over on the counter. We looked at...
Read more
More
$3.65
- Compare At:
-
$4.34
- You Save:
-
$0.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001948
To order indicator light use WP903115.
Do-It-Yourself Stories from Customers like You
Burner wouldn't reliably light Christian K. • Calpine , CA • October 15, 2024
Replaced coils on gas valve; while at it replaced door screws which were starting to wear from assorted repairs over the years.
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Whirlpool part
By: Whirlpool
Part Number: W11193817
The Wire Harness is an OEM part for Whirlpool washing machines. The wire harness is responsible for transmitting electrical signals that power components and allow them to communicate during each cycle.
Causes of a bad wire harness can be normal wear and tear over time, pinched or cut wires, or wire insulation breakdown due to heat or moisture exposure.
Symptoms of a bad wire harness include:
- Lights or display not working properly
- Washer not starting cycles
- Sensors or switches malfunctioning
- Intermittent operation
This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Had "lf" error code washer took too long to fill and didn't cycle through the entire wash it would just stop Robert H. • Laurel , MS • April 03, 2024
Replaced the Water Valve Inlet and Wiring Harness
Read more
More
$81.64
- Compare At:
-
$97.15
- You Save:
-
$15.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2172937
This three-circuit connector housing organizes and protects terminals in an appliance wiring harness. It provides a secure, insulated plug connection to help prevent loose contacts, heat damage, and intermittent operation when the original housing is cracked or melted. What it does:
- Holds three wiring terminals in the correct orientation for a mating connector
- Insulates and locks terminals to reduce arcing and overheating at the plug
- Replaces cracked, brittle, or heat-damaged connector housings
- Symptoms can include intermittent power, burnt odor near the connector, discoloration/melting, or a plug that won't stay latched
What's included:
- 1 three-circuit connector housing
Install notes:
- Disconnect power before servicing the appliance
- Note wire/terminal positions and transfer them one at a time into the new housing
- Inspect terminals; replace any that are discolored, loose, or damaged. Use the correct crimp tool/terminals specified for your model
- Fully seat each terminal until it locks and the connector latch engages securely
More
$13.48
- Compare At:
-
$15.91
- You Save:
-
$2.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WP903115
Genuine Whirlpool part
By: Whirlpool
Part Number: W11591637
Fix washer won't drain issues with this lower wiring harness. Restores electrical connections between drain pump and control components.
More
$68.95
- Compare At:
-
$82.74
- You Save:
-
$13.79
Genuine Lg part
By: Lg
Part Number: EAD62037107
Washer won't start or runs intermittently? A faulty wiring harness disrupts power flow between components. This repair restores connections in 20-30 minutes.
More
$55.65
- Compare At:
-
$66.78
- You Save:
-
$11.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP95292
Size: 26 inches long. F18t8/cw/k26.
Do-It-Yourself Stories from Customers like You
I had a dead front dual burner on our kitchen aid range no error code Francis V. • Shelton , CT • April 04, 2015
I replaced the controller. I had a heck of a time figuring out how to get to it. The video on the website showed access to the control via the rear panel. On the Kitchen Aid we have, the back panel is part of the range's main frame and does not come off. Turns out, 2 screws behind the fluorescent lamp had to be removed and the entire control panel housing lifts up and can be tilted forward. (I needed to clean behind the range anyway, so it was no big deal)!!
The replacement part instructions...
Read more
More
$69.95
- Compare At:
-
$83.24
- You Save:
-
$13.29