Washer Drum Support Roller Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11130362
Replacement suspension rod kit for top-load washers. Installs between cabinet and wash basket to stabilize during spin. Replace if rods are worn or broken.
Do-It-Yourself Stories from Customers like You
The washer was slamming around violently during spin cycles and walking across the floor. Nick D. • Roseville , MI • November 12, 2023
Our Maytag top load washer developed a bad slam during the spin cycle. Bad enough to shake the whole washing machine and make it move across the floor, sounded like it was going to destroy itself you could hear this thing in the furthest room in the house mind you it is on the opposite end of the house in the basement.
For a while, you could do certain things to stop the issue or improve it, as you would expect that stopped working. I made sure the washing machine was level which I had to...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780048
Four-piece suspension rod kit connects washer drum to frame. Replace if rods are broken, worn, or springs have weakened causing excessive drum movement.
Do-It-Yourself Stories from Customers like You
Whirlpool washer model number wtw4800xq2 went off balance banging and bouncing around all of the time Jessica B. • Riverview , MI • November 13, 2019
After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780045
Suspension rod supports and stabilizes the washer tub assembly. Replace if cracked, worn, or damaged to restore proper tub support and balance.
Do-It-Yourself Stories from Customers like You
Washer shook uncontrollably during spin cycle unit about 4 years old. John H. • Nauvoo , IL • September 26, 2017
Replaced suspension springs/rods and all associated bushings in the kit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820048
Four-rod suspension kit that supports the washer tub assembly. Replace when rods are worn, stretched, or causing excessive vibration during spin cycles.
Do-It-Yourself Stories from Customers like You
At high spin the washing machine tub was unbalanced and banging from side to side and then shut down Jonah T. • Richardson , TX • December 17, 2019
I called a repair guy who came out to specifically replace the suspension rods because I read that if you push down on the tub and it bounces around, then the rods have worn out. After running the diagnostics, the repair guy tried to tell me it was because the lid was not locking correctly! After expressing concern that this makes no sense, he continued taking things apart and noticed the agitator rollers were all broken and told me this is probably causing the tub to be unbalanced. I...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH16X26911
Suspension rod stabilizes the washer drum and mounts between the cabinet and tub. Replace if cracked, worn through, or broken. Sold individually.
Do-It-Yourself Stories from Customers like You
Washer on spin cycle would shake and move around Dennis B. • Clarksburg , MD • December 09, 2019
Replaced all 4 rod and spring assemblies.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH16X26910
These components support and balance the washer drum during spin cycles, connecting the tub to the washer cabinet. Replace when you experience excessive vibration, loud banging noises during spin, or the washer moving significantly during operation.
Do-It-Yourself Stories from Customers like You
Washer on spin cycle would shake and move around Dennis B. • Clarksburg , MD • December 09, 2019
Replaced all 4 rod and spring assemblies.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10440729
Suspension bearing kit supports the tub assembly in top-load washers. Replace if bearings are worn, cracked, or causing excessive tub movement or noise.
Do-It-Yourself Stories from Customers like You
Whirlpool washer model number wtw4800xq2 went off balance banging and bouncing around all of the time Jessica B. • Riverview , MI • November 13, 2019
After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC66-00470A
Replaces worn or leaking shock absorbers that cause excessive vibration and wobbling during spin cycles. Restores stability and smooth operation.
Do-It-Yourself Stories from Customers like You
Washer banging and bouncing E M. • Debary , FL • February 24, 2018
My washing machine was making a loud thumping sound and bouncing around a bit. Research suggested that it could be bearings and/or the spider shaft assembly. After watching the instruction videos to replace the spider or bearings, I seen you need to replace both the shaft seal and tub gasket to get to the spider and bearings. So I ordered both and waited for them to arrive. Plan was to disassemble the washer, determine what was needed, order the additional parts needed, and reassemble after the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285744
Replacement tub suspension pads for washing machines. Install under the tub to cushion and stabilize during spin cycles. Replace if cracked or missing.
Do-It-Yourself Stories from Customers like You
It was dancing around the floor when it went into the spin cycle Harry W. • Landisburg , PA • January 19, 2020
First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went...
Read more
More
Genuine Lg part
By: Lg
Part Number: 383EER3001J
Shock absorber kit reduces vibrations and stabilizes the drum during wash cycles. Replace if worn, leaking, or causing excessive movement and noise.
Do-It-Yourself Stories from Customers like You
Lg washer: roaring bearings pump noises not draining properly and clogged hoses Albert W. • Germantown , MD • October 07, 2018
Our 10-year-old LG WM2487HWMA front load washer had gradually developed multiple problems. It sounded like a jet engine during high speed spin, both the drain pump and circulation pumps were noisy, it would not drain properly (water was coming in during spin cycle), no water was spraying out at the top of the door into the drum like it is supposed to when the circulation pump was running. It's amazing we had still been able to wash clothes at all! With the help of the excellent...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11130359
This kit includes suspension rods and cups that support the washer's inner tub, absorbing vibration and movement during the spin cycle. The rods connect between the outer tub and the base frame to keep the tub properly balanced. Replace this kit if your washer shakes excessively, bangs loudly during spin cycles, or walks across the floor - worn or broken suspension rods are a common cause.
Do-It-Yourself Stories from Customers like You
Making noise and moving when in spin cycle. Dale A. • New York , NY • April 26, 2022
Replace suspension rods.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC97-16350U
Stop shake, thumping, and out-of-balance pauses with this suspension damper rod for select top-load washers. It supports the tub and absorbs vibration during wash and spin for smoother, quieter cycles.
What it does
- Supports the tub and dampens vibration during spin
- Helps reduce shaking, banging, and balance interruptions
- Restores stable operation after a broken or weakened rod
What’s included
Pro tip
Install notes
Do-It-Yourself Stories from Customers like You
Washer kept going out of balance causing the whole cycle to restart Richard B. • Horton , AL • August 28, 2025
Replaced all 4 suspension dampers.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213
The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently.
Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.
Symptoms of a bad Thrust Bearing Kit include:
- The washing machine is noisy during operation
- The washer struggles to agitate or spin
- The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
- Excessive vibration during use
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Spins slowly
-
Pumps but will not spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Washer squeaked when tub is stopped during spin cycle Daniel K. • Grafton , WI • July 22, 2018
My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11217817
Four-rod suspension kit that supports the washer tub and absorbs vibrations. Replace when rods are bent, broken, or when the tub sags or moves excessively.
Do-It-Yourself Stories from Customers like You
Banging and stopping out of balance Gary T. • Creal Springs , IL • February 22, 2024
Replaced suspension rods.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21002026
Snubber ring cushions the tub base during spin cycles. Replace if cracked, worn, or producing plastic shavings to restore smooth, quiet operation.
This part fixes the following symptoms
-
Shakes and moves
-
Noisy
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Loud knocking and rattle while in spin cycle. Daniel K. • Grafton , WI • July 30, 2017
18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH03X32097
Transmission pulley and nut for top-load washers. Transfers motor power to the drum for spinning and agitation. Replace if cracked, worn, or damaged.
Do-It-Yourself Stories from Customers like You
Clothes still wet after spin cycle Robert B. • Vicksburg , MS • December 20, 2025
New water pump and new drive belt
Read more
More