Washer Foreign Objects Tub Pump Parts
Genuine Lg part
By: Lg
Part Number: 4681EA2001T
The Drain Pump and Motor is an original LG (OEM) replacement part for LG made washing machines that is responsible for removing water from the washer at the end of the wash cycle. The pump forces water out through the drain hose so that clothing comes out free of excess water, making the drying process faster.
Symptoms of a failing Drain Pump Motor include:
- Water not draining out of the washing machine
- Noisy or unusual sounds coming from the pump area during the drain cycle
- The washing machine stopping mid-cycle
Causes of a bad Drain Pump Motor can range from obstructions in the pump or hose, which can strain or damage the motor, to wear and tear from regular use leading to motor failure. Electrical issues can also affect the motor's performance, preventing it from operating correctly.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Lg washer not draining odd sounding pump noise Tom K. • Blaine , WA • September 07, 2014
It was fairly obvious that the washer drainer motor had failed, water was not draining, filter was clean (bottom lower left panel door, have a pail ready!) and drain line was not blocked.
Someone had provided great advice on the Appliance Parts Pro's site about replacing the drain motor from the bottom. Great suggestion! Easy to do, although be prepared for more water to drain from the washing machine onto the floor after you lay it over.
I carefully lowered the machine onto it's back,...
Read more
More
$55.44
- Compare At:
-
$65.97
- You Save:
-
$10.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3363394
The Direct Drive Washer Pump is an OEM part for Whirlpool washing machines. It is responsible for pumping water out of the washer during the drain cycle, ensuring that the washing machine drains efficiently after each wash.
Causes of a bad direct drive washer pump can include blockages from debris or foreign objects, wear and tear from regular use, damage to the pump impeller, or electrical issues affecting the pump motor. Over time, these factors can hinder the pump's performance, leading to operational issues.
Symptoms of a bad direct drive washer pump include:
- Washer not draining water properly
- Unusual noises during the drain cycle, such as grinding or humming
- Water leaks from the bottom of the washer
- Washing machine stopping mid-cycle due to drainage issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Related item: Motor coupling 285753A.
This part fixes the following symptoms
-
Leaks water
-
Leaking
-
Will not drain
-
Fills and drains at the same time
See more...
Do-It-Yourself Stories from Customers like You
Leaky direct drive pump Thomas P. • Raleigh , NC • April 09, 2014
With much trepidation, I Googled leaking washing machines and deduced that our problem was likely (but not certain) that we needed to replace the direct drive washer pump. After viewing the AppliancePartsPros video, I decided that ordering the $30 part was worth the risk (vs a $120 plus service call). The pump arrived w/in 2 days and my wife and I experienced an enjoyable bonding experience installing it :). But it's now working great and there is no leak. ... Kudos to AppliancePartsPros for a...
Read more
More
$41.95
- Compare At:
-
$50.34
- You Save:
-
$8.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10605427
The Water Pump is an OEM replacement part for Whirlpool washing machines. This component is responsible for circulating and draining water during the wash and rinse cycles, ensuring proper cleaning and rinsing of clothes.
Causes of needing to replace the water pump can include normal wear and tear over time, clogging or obstruction by debris or foreign objects, or mechanical failure due to excessive strain or motor burnout.
Symptoms of a faulty water pump include:
- Failure to drain water from the washer tub
- Leaking or standing water in the washer drum
- Unusual noises or vibrations during operation
- Incomplete or insufficient water circulation during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.
Do-It-Yourself Stories from Customers like You
Pump was getting jammed intermittently Christopher G. • Mc Kees Rocks , PA • April 26, 2024
The original pump was getting jammed intermittently, more and more often. I cleaned it out, but that didn't help the jamming. So I ordered a new pump. Have your new pump on hand and look at it to see how it attaches. The original pump, a different part number than the replacement, lasted about 7 years of almost everyday use, with multiple loads each day.
My washer model Maytag MHW5500FW0 has the pump at the bottom back, in an awkward position. This took me about 2 hours due to the awkward...
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10730972
The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a key pump function by introducing water into the wash tub. Proper water circulation is necessary for effective cleaning.
Symptoms of a faulty pump include:
- Slow or no water filling during wash cycles
- Water leaks or drips due to cracked pump housing
- Loud grinding or knocking noises during operation
- Error codes for water fill related issues
Causes of pump failure can be due to regular usage over time, mineral buildup inhibiting flow inside the pump, or cracks developing in the plastic housing exposing internal components to corrosion.
This OEM Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Noisy
-
Burning smell
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Loud noise when washer was in a drain cycle Robert G. • Clayton , NC • January 03, 2016
There was a loud noise from my washer during the drain cycle. (The washer seemed to drain just fine.) It was pretty easy to determine that the noise was coming from the drain pump. (Which for my washer is behind the front lower inspection panel on the right side front.) I inspected the outside of the pump for any physical damage and verified no issues with the pump or the mounts. Everything seemed ok. I then checked the drain pump filter(You will need something to catch water if you do...
Read more
More
$108.65
- Compare At:
-
$155.00
- You Save:
-
$46.35
Genuine Ge part
By: Ge
Part Number: WH23X28418
The Drain Pump is an OEM part for GE washing machines. It's engineered to remove the used water from the washer at the end of each cycle, ensuring the machine is properly emptied and ready for the next load. This component is responsible for the circulation and expulsion of water, playing a vital role in the washing machine's ability to clean clothes thoroughly.
Causes of a bad Drain Pump can include obstructions within the pump itself, such as small garments or debris that can block water flow, or mechanical failures like a burnt-out motor or damaged impeller blades.
Symptoms of a bad Drain Pump include:
- Water remaining in the drum after the wash cycle has completed.
- The washing machine failing to start due to sensing water from a previous cycle.
- Unusual noises coming from the pump area
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Washer does not start any of the wash cycles. Washer goes thru the initial steps like momentarily opening the water valve and locks the lid. Then nothing happens. Ronnel L. • East Patchogue , NY • November 15, 2023
I opened the cover panel of the control board. I visually checked for burns on the board and verified all connectors were firmly seated.
I opened the bottom of the unit, and I saw the service manual in a zip-lock bag. From this manual, I verified that the drain pump resistance is good, the start capacitor is good, and the lid switch is good.
I entered diagnostic service mode. Persistent alarms are 4 and 25.Error 4 means Reset Monitor, while Error 25 means Pressure Sensor Dropout. I...
Read more
More
$43.58
- Compare At:
-
$52.30
- You Save:
-
$8.72
Genuine Whirlpool part
By: Whirlpool
Part Number: 280187
The Washer Drain Pump Assembly is an OEM part for Whirlpool washing machines. This assembly is essential for the washer's ability to drain water out of the drum after the wash and rinse cycles, ensuring clothes are properly spun and not left soaking wet.
Causes of a malfunctioning washer drain pump assembly can include blockages from small items or debris, such as coins, socks, or lint, that accidentally make their way into the pump.
Symptoms of a bad Washer Drain Pump Assembly include:
- Water not draining out of the washer, leaving clothes wet
- Unusual noises coming from the pump area, indicating a blockage or damage
- The washer stopping mid-cycle due to inability to drain
- Error codes displayed on the washer related to draining issues
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Saved $$$ doing it myself Bob C. • Sacremento , CA • June 12, 2014
I have a 12 year old Kenmore Elite washer. One day, suddenly, I heard a grinding noise and the washer abruptly stopped. I called a repair service and was told it could be the bearings in the drum of this front-load washer, or it could be the washer's drain pump, which automatically shuts down when the drain pump fails. The repairman said, if it is the drum, it wasn't worth fixing for the age of this washer. It would cost $85 for him to come out and diagnose the problem, then if I decide to fix...
Read more
More
$138.95
- Compare At:
-
$166.74
- You Save:
-
$27.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 137221600
The Frigidaire Drain Pump is an OEM part for Frigidaire washing machines. It plays a crucial role in the washer's operation by removing water from the wash tub at the end of each cycle, ensuring your clothes are properly drained before the spin cycle.
Causes of a bad drain pump can include blockages from debris such as coins, lint, or small items that escape from clothing, as well as motor or impeller damage. Electrical failures can also impair pump function, leading to inadequate water removal.
Symptoms of a bad Frigidaire Drain Pump include:
- Water not draining completely from the washer
- Unusual noises, like humming or buzzing, indicating the pump is struggling
- Washer stopping mid-cycle
- Water pooling around the base of the machine
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My front loading washing machine would not drain. Meryl L. • Fort Thomas , AZ • October 26, 2020
So, Saturday, the washer wouldn't drain, yes, I tried the Drain/Spin cycle. So I took the clothes out, rinsed them out twice in the laundry sink and dried them. After a quick Google search, I came to the conclusion that the pump was bad and ordered a pump, $125.
Over the course of the next four days, expecting the new pump on Thursday, I baled out the washer, pulled it out from the wall and propped up the front (it's HEAVY), removed the front access panel, removed the drain inlet and outlet...
Read more
More
$152.95
- Compare At:
-
$183.54
- You Save:
-
$30.59
Genuine Ge part
By: Ge
Part Number: WH11X39237
This is the drain pump and filter assembly for select washing machines. It moves wastewater out of the tub while trapping lint and debris to help prevent clogs and protect the pump.
- Pumps water out during drain cycles and spin
- Integrated filter screens out debris to maintain flow
- Can help resolve slow or no drain, standing water, or draining-related errors
- May reduce unusual humming/buzzing from a failing pump
What's included: One drain pump with integrated debris filter assembly. Install notes:
- Unplug the washer and turn off water supply before servicing
- Have towels or a shallow pan ready—residual water will drain when hoses are removed
- Note hose and wire positions before transfer; swap clamps and connectors one-for-one
- After installation, run a short drain/spin to check for leaks and proper operation
Do-It-Yourself Stories from Customers like You
Washer don’t draining Stephanie W. • Crab Orchard , KY • September 17, 2025
Replaced drain pump
Read more
More
$57.56
- Compare At:
-
$63.92
- You Save:
-
$6.36
Genuine Ge part
By: Ge
Part Number: WH23X10030
The Drain Pump is an OEM part for GE washing machines. It is responsible for removing water from the washer's tub at the end of each wash cycle, ensuring that your laundry is properly drained before the spin cycle. This pump helps to prevent water from sitting in the tub, which can lead to mold and mildew.
Symptoms of a bad Drain Pump include:
- Water not draining out of the washer, leading to stagnant water pooling in the tub.
- Unusual noises during the drain cycle, indicating a struggle or failure to operate.
- The washing machine stopping abruptly before or during the drain phase.
Causes of a bad drain pump can include blockages from small garments or debris, mechanical failure from wear and tear, or electrical issues that affect the pump's power supply.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water pump on washer went bad Joshua B. • Morrow , OH • March 19, 2017
I ordered a new pump on this website. They provided me with written directions as well as a video to follow along with on how to change the pump. As always it wasn't as easy as the video, but that was the mechanic no the tool! Great job on the service. Will order parts from here again.
Read more
More
$55.66
- Compare At:
-
$82.48
- You Save:
-
$26.82
Genuine Samsung part
By: Samsung
Part Number: DC31-00054D
The Washer Drain Pump is designed to keep your Samsung washer functioning efficiently. This genuine OEM part ensures a perfect fit and reliable performance, effectively removing water during each wash cycle. By replacing a faulty or worn-out pump with the Washer Drain Pump , you can prevent leaks and potential water damage in your laundry area. Its high-quality construction guarantees durability and long-lasting operation, giving you peace of mind with every use. Compatible with a wide range of Samsung washer models, this drain pump makes installation straightforward and hassle-free. Whether your washer is struggling to drain properly or making unusual noises, this genuine OEM part restores its optimal functionality. Investing in the Washer Drain Pump not only enhances the performance of your appliance but also extends its lifespan, ensuring that your washer remains a reliable part of your home for years to come. Trust this genuine OEM part to deliver the performance and reliability you expect from Samsung.
Do-It-Yourself Stories from Customers like You
Water didn't drain from washing machine Dan V. • Bridgeville , DE • July 08, 2018
Replaced drain pump. Your video on your web site was very helpful.
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876600
This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed.
What it does
- Pumps water from the tub to the household drain during the drain cycle
- Helps resolve standing water, slow draining, or humming from a seized pump
- Reduces long/aborted cycles caused by incomplete draining
- Can stop leaks at the pump body when the housing is cracked
What’s included
One drain pump assembly.
Install notes
- Unplug power and turn off water; bail out remaining water before service
- Clamp/remove hoses and keep towels handy; transfer any mounting bracket as needed
- Inspect and clear the drain hose and tub-to-pump hose before reassembly
- Run a drain/spin test to verify proper flow and check for leaks
This OEM drain pump is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Would not drain. Lacy A. • Kill Devil Hills , NC • June 25, 2018
Ordered the correct part/ Pump from this Awesome website and replaced the drain pump. Good to go!!
Read more
More
$100.48
- Compare At:
-
$135.27
- You Save:
-
$34.79
Genuine Lg part
By: Lg
Part Number: 3108ER1001B
The Pump Casing is an OEM replacement part for LG washing machines. It is a crucial component that houses the drain pump, which is responsible for removing water from the wash tub during the drain and spin cycles.
Symptoms of a need to replace the pump casing:
- Leaks or water seeping from the pump area
- Unusual noises or vibrations during the drain or spin cycles
- Pump failure or inability to drain water effectively
- Cracks or damage to the casing itself
Causes of a faulty pump casing can include physical impact or mishandling, excessive wear and tear over time, or potential manufacturing defects.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
My lg washer quit draining and was showing error code oe Dan C. • Demotte , IN • June 05, 2016
I took it apart and found the drain pump motor had come apart. I found appliancepartspros.com and read the reviews for this company. Customers were very satisfied with the parts and service. I ordered the parts (at a savings of over 30% from my local appliance store) and had them in 2 days (YES TWO DAYS). Totally excellent service. Put the washer back together and it works like new. The repair was very easy to do myself and saved me well over $100. I recommend your company to every do it...
Read more
More
$37.58
- Compare At:
-
$44.34
- You Save:
-
$6.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W10536347
The Drain Pump is an OEM part for Whirlpool washing machines. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely.
Symptoms of a failing drain pump include:
- Water not draining out of the washing machine, leading to stagnant water pooled inside the tub
- Unusual noises, such as buzzing or humming, indicating that the pump motor is struggling
- The washing machine stopping mid-cycle due to inability to drain
Causes of drain pump failure typically include obstruction by foreign objects like coins or socks, motor burnout, or impeller damage. Regular maintenance, such as checking for debris in the pump's filter, can help prevent these issues.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Leaking
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Drain pump was out on cabrio washer Bill H. • Manchester , KY • March 25, 2014
Looked up the part on your website, ordered it, it came in the next day, watched the install video that you provided, installed it in a few minutes, happy wife!
Read more
More
$99.78
- Compare At:
-
$120.98
- You Save:
-
$21.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276397
The Drain Pump is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine, preventing water from remaining in the tub after a wash cycle, which is crucial for the appliance's proper operation and the cleanliness of your laundry.
You should replace the drain pump if it becomes faulty or stops working. Common causes of a bad drain pump include blockages from debris or lint, wear and tear over time, or electrical malfunctions. These issues can prevent the pump from effectively draining water.
Symptoms of a bad drain pump include:
- Water not draining from the washing machine
- Unusual noises during the drain cycle, such as humming or grinding
- The washer stopping mid-cycle with water still in the tub
- Error codes related to draining issues on the washer's display
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Washer wouldn't pump water out. Michael M. • Winnebago , MN • March 20, 2014
It was a fast fix. its a Maytag Centennial Top load washer. it took me about 20mins to remove the pump and instal the new one.Most of the time was spent moving the washer.
Read more
More
$94.55
- Compare At:
-
$118.11
- You Save:
-
$23.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35-6780
The Washer Drain Pump Assembly is an OEM part for Whirlpool washing machines. This component is vital for draining water from the washer drum during the wash and rinse cycles. The pump forces water out of the drum and through the drain hose, ensuring that clothes are cleaned and rinsed effectively.
Symptoms of a failing Washer Drain Pump Assembly include:
- Water not draining from the washer, leaving clothes wet
- Unusual noises during the drain cycle, such as humming or grinding
- Error codes on the washer's display indicating drainage issues
- Water leaks from the pump area or from the washer
- The washer stopping mid-cycle due to drainage problems
Causes of a bad drain pump assembly can include obstructions from debris, wear and tear on the pump motor over time, electrical issues such as short circuits, or damage from improper installation or usage.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Note: This pump has been redesigned and the mounting plate is no longer required. It now mounts directly to the base of the washer.
Do-It-Yourself Stories from Customers like You
The pump on my washing machine went bad William P. • El Paso , TX • April 26, 2014
It was a relatively easy fix. Removed the small access panel at the back of the washing machine after unplugging the unit. The pump is right there. Disconnected the two hoses to the pump, catching some water with towels. Removed three retaining screws, then realized I had not disconnected the belt from under the unit. Easy fix, tilted the unit and disconnected the belt. Put in the new pump , connected the hoses, then reconnected the belts. Works like new!
Read more
More
$74.23
- Compare At:
-
$91.11
- You Save:
-
$16.88
Genuine Lg part
By: Lg
Part Number: 383EER2001A
The Pump Filter Assembly is an OEM replacement part for LG washing machines. It is a crucial component that filters out lint, debris, and other particles from the wash water, preventing them from recirculating and damaging the pump or other internal components.
Symptoms of a need to replace the pump filter assembly:
- Clogging or blockages, leading to poor drainage or water not draining completely
- Excessive buildup of lint, hair, or other debris in the filter screen
- Leaks or water seeping from the filter housing or surrounding area
- Unusual noises or vibrations during the drain or spin cycles, indicating a potential blockage
Causes of a faulty pump filter assembly can include excessive lint accumulation, damage to the filter screen or housing due to impact or mishandling, and general wear and tear over time.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Water was leaking around the filter cap on our lg front loading washer and flooded our laundry room John C. • The Villages , FL • May 12, 2015
Unscrewed the leaking filter and replaced with the new one. End of problem. Great service and prices at Appliance Parts Pros.com. This will be the first place I check whenever I need repair parts for any of our appliances in the future.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36