Washer Dryer Combo Nut Damper Control Refrigator Parts
Genuine Ge part
By: Ge
Part Number: WE04X22654
The Timer is an OEM part for GE electric dryers. It serves as the critical control module that monitors and regulates dryer cycle times during functions like regular, wrinkle guard, fluff and more.
Causes of a bad timer include failure of internal electronic components or wiring connections due to prolonged exposure to heat and vibration inside the dryer cylinder. Mechanical wear of buttons or dials used to program cycles may occur as well over time.
Symptoms of a bad Timer include:
- Inability to set or change desired drying times accurately
- Premature stopping or starting of cycles without user input
- Faulty time or status display windows during use
- Complete shut down requiring manual override or reset
The GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Knob cracked shaft and timer would not advance. Carol F. • Wells , ME • April 21, 2023
Replaced the timer switch and knob.
Read more
More
$97.60
- Compare At:
-
$116.14
- You Save:
-
$18.54
Genuine Whirlpool part
By: Whirlpool
Part Number: 285938
Fixes washers that won't advance through cycles or stop mid-cycle. Timer controls wash cycle progression and automatic shutoff. DIY install in 10-20 minutes.
Do-It-Yourself Stories from Customers like You
Cycles would not complete Jonathan G. • Newton , MA • December 21, 2016
I could not find specific online instructions for this job. Here are some tips.
1. Unplug the washer.
2. Unscrew the dial on the broken timer.
3. Gently pry up the thin plastic place-indicator plate (the thing with the arrow under the dial) with two flathead screwdrivers.
4. Unscrew the two hex screws holding the old timer in place.
5. Unscrew the phillips-head screws holding the console in place and flip up the console.
6. Remove the electrical connector from the bad timer, and remove the bad...
Read more
More
$134.74
- Compare At:
-
$160.34
- You Save:
-
$25.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.56
- Compare At:
-
$8.90
- You Save:
-
$1.34
Genuine Frigidaire part
By: Frigidaire
Part Number: 131758600
Washer won't advance through cycles or stops mid-cycle? The timer controls wash, rinse, and spin sequences. DIY-friendly repair restores normal operation.
Do-It-Yourself Stories from Customers like You
The washer wouldn't advance to the next cycle Alphonso C. • Axton , VA • January 03, 2017
I replaced the timer
Read more
More
$219.95
- Compare At:
-
$261.74
- You Save:
-
$41.79
Genuine Ge part
By: Ge
Part Number: WH12X950
Fix a washer that won't advance through cycles or stops mid-cycle. This timer controls cycle duration and sequencing in your washer dryer combo unit.
Do-It-Yourself Stories from Customers like You
Washer would not drain L. H. • Jackson , MS • May 20, 2019
Replace timer; remove lid switch
Read more
More
$265.70
- Compare At:
-
$318.84
- You Save:
-
$53.14
Genuine Ge part
By: Ge
Part Number: WE2M302
Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.
Do-It-Yourself Stories from Customers like You
Dryer door did not close Wendy G. • Yonkers , NY • November 09, 2019
It was easy, I got the model number of my dryer, then I went on google and found your website. You got a perfect diagram of the door of my dryer. After I saw the video relate it to my problem, I purchased the parts that I need it to fix it, I didn’t need my husband to do it for me. I gave him a surprise after he got home for work. It was all done.
Thanks
Read more
More
$12.35
- Compare At:
-
$13.59
- You Save:
-
$1.24
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 131719100
Timer won't advance or dryer runs continuously? This timer control restores proper cycle progression in auto and timed modes. DIY-friendly repair.
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$196.95
- Compare At:
-
$232.40
- You Save:
-
$35.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303297177
Fix a dryer that won't turn off or advance through cycles with a new timer. Controls cycle duration and automatic shutoff. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Turned out to be a thermostat wouldn't heat up and the timer would not advance John M. • Lewiston , UT • December 21, 2024
Changed the thermostat
Read more
More
$196.95
- Compare At:
-
$234.37
- You Save:
-
$37.42
Genuine Lg part
By: Lg
Part Number: 4011FA4353B
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
Do-It-Yourself Stories from Customers like You
The washer sounded like a jet plane when it went through the spin cycle very loud noise Lane C. • Pleasant Garden , NC • February 24, 2015
I originally thought the washer had a bad bearing, but once I got it disassembled it the spider arms were broken. This required the replacement of the tub assembly. While replacing the tub I replaced all of the water bellows. The parts came quickly, the live chat and videos were very helpful. This washer has to be completely disassembled to replace the drum, so mark all the screw locations, tag and bag everything and take lots of pics. It was a very rewarding project and hundreds of dollars...
Read more
More
$11.60
- Compare At:
-
$13.80
- You Save:
-
$2.20
Genuine Lg part
By: Lg
Part Number: 1SZZER4002A
This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.
- Secures panels, brackets, and mounting points as specified by the manufacturer
- Replaces screws that are lost, damaged, corroded, or stripped
- Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
- Maintains proper alignment and stability of the assembly
What's included: One screw
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to its original location; start threads by hand to avoid cross-threading
- Use the correct driver; tighten snugly without over-torquing into metal or plastic
- Refer to your model's parts diagram to correct location and quantity
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Frigidaire part
By: Frigidaire
Part Number: 134237200
Fix a washer that won't advance cycles, stops mid-cycle, or runs continuously. This control timer regulates wash and spin durations. 30-minute repair.
Do-It-Yourself Stories from Customers like You
My washer wasn't spining Jose M. • Germantown , MD • November 02, 2015
Well it was easier it took me less than 30 minutes
and my hasher is ready to be used thankyou.
Read more
More
$221.35
- Compare At:
-
$263.41
- You Save:
-
$42.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 131062300
If your dryer won't shut off or cycles won't advance, the timer may have failed. This control manages drying cycles and run time. DIY repair in 20 minutes.
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The timer had stopped advancing William S. • Arlington , TX • April 03, 2017
With a Phillips screw driver, on the back of the control panel there was about 6 or 7 screws to undo, to take the cover off and 2 screws holding the timer in place. Just undone those, took out old timer, made sure I took wires from old timer one at a time, and, put on new timer. Put everything back, although I had to find a couple of very small washers to make the timer fit tight, in the 2 holes it came out of. Luckily I had those or would of been a very loose timer. Very easy to do.
Read more
More
$210.70
- Compare At:
-
$252.84
- You Save:
-
$42.14
Genuine Ge part
By: Ge
Part Number: WH12X10164
Washer fills but won't agitate or advance cycles? The timer controls wash, rinse, and spin sequences. DIY repair typically takes 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Idler was broken and the timer no longer functioned properly George H. • Miami , FL • September 20, 2014
I live overseas and these parts were not available locally. I have a repair person who takes care of all my appliances. He installed the new parts in about 15 minutes and my washer is working fine now.
Read more
More
$267.95
- Compare At:
-
$321.54
- You Save:
-
$53.59
Genuine Ge part
By: Ge
Part Number: WH12X20274
Won't start, spin light blinking, or won't stop spinning? This control board manages cycles and settings. Common DIY repair, typically installed in minutes.
Do-It-Yourself Stories from Customers like You
Lights on washer are lit and will not turn off. Washer will not turn on Tommy L. • Hilton Head Island , SC • July 04, 2019
Remove the 2 screws that hold on the front cover just above the washer, the control board is in front of you. Remove the 2 small screws that secure the board, they are star screws, very small ones, do not drop them, for they will fall into the washer tub. Take a picture of the wiring harness, press the 2 tabs on each side of the board, left and right side, the board will pop out. replace the wiring harness, wiring harness has tabs that hold them in place. Also, check the magnetic lid switch,...
Read more
More
$207.95
- Compare At:
-
$247.46
- You Save:
-
$39.51