110-20022012 Parts

Best Seller

Genuine Whirlpool part

Washer Lid Lock Bezel

By: Whirlpool

Part Number: WPW10392041

Plastic trim bezel that mounts around the lid lock on your top-load washer's panel. Replace if cracked, broken, or missing to restore a clean finish.

Do-It-Yourself Stories from Customers like You Lid lock broke Ken K. • Los Angeles , CA • December 11, 2015

Put in new lid lock. This is my second one in 1 year. Whirlpool suggested I leave it loose so that if somebody did try and force it open, it wouldn't break it. This lid lock has 4 wires and cannot be bypassed. Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Console Clip

4.9 (15)

By: Whirlpool

Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment.

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

Loose console assembly that is not securely fastened
Misaligned or dangling controls that do not sit flush
Dislodged console at risk of detaching from housing
Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes Jay S. • Hammond , IN • February 07, 2017

I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more

$20.38

Compare At:: $24.25
You Save:: $3.87

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Lid Hinge Bearing

4.9 (10)

By: Whirlpool

Part Number: WP21258

The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.

Do-It-Yourself Stories from Customers like You Whirlpool washer David L. • Linn , MO • August 31, 2015

With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Lid Bumper

5.0 (9)

By: Whirlpool

Part Number: WP9724509

These lid bumpers are sold individually.

Do-It-Yourself Stories from Customers like You (1) motor drive coupler (spider) broke / (2) lid switch cracked at screw hole which allowed it to drop down causing the switch not to activate without rigging an extension on the lid actuator post David S. • Hillister , TX • May 04, 2016

Replaced both with ease after reviewing video. Parts matched OEM specs perfectly. ***Shipping time was excellent - placed order with standard package delivery at @11pm on a Tuesday evening & received the order in Southeast Texas Thursday morning @11am. Read more

$7.48

Compare At:: $8.90
You Save:: $1.42

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

5.0 (3)

By: Whirlpool

Part Number: WPW10109200

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

Fastens panels, brackets, or internal parts to the cabinet/frame
Helps maintain alignment to reduce vibration and rattling
Replaces lost, stripped, or corroded screws
Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

What's included: One screw. Install notes:

Disconnect power; shut off water or gas if applicable
Match thread and length to the original; replace one at a time to keep alignment
Start threads by hand to avoid cross-threading; use the correct driver
Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

Do-It-Yourself Stories from Customers like You Missing baffles Anna S. • Shoreview , MN • January 31, 2016

I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more

$7.56

Compare At:: $8.32
You Save:: $0.76

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Locking Nut

4.7 (6)

By: Whirlpool

Part Number: WP3359452

This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.

Do-It-Yourself Stories from Customers like You Whirlpool washer was shaking and moving in spin cycle Charles B. • Sioux Falls , SD • September 25, 2018

Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Motor Start Capacitor

4.6 (8)

By: Whirlpool

Part Number: W10804665

Fix a washer that fills but won't spin or agitate. This motor start capacitor stores electrical energy to help start your washer motor. DIY repair.

Do-It-Yourself Stories from Customers like You Bad capacitor Jeremy L. • Calera , OK • April 28, 2014

I was actually getting an error code for the shifter and speed sensor. I ordered a shifter, which included the speed sensor, and replaced that part but the washer still didn't work. After doing some more research online, someone mentioned that the capacitor may be bad. After talking to my dad, who is an electrician, he said it sounded like my problem could very well be the capacitor. Knowing that we'd been without a washer for almost two weeks at this point, I went ahead and ordered the... Read more

$49.51

Compare At:: $58.42
You Save:: $8.91

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Bleach Dispenser Cup

5.0 (5)

By: Whirlpool

Part Number: WPW10192089

Cracked bleach dispenser leaking onto your washer? This cup holds and meters bleach during wash cycles. Simple snap-in installation, video included.

Do-It-Yourself Stories from Customers like You Unbalanced load damaged the top ring of the outer drum David S. • Milton , FL • November 18, 2024

Replaced top ring and removed inner drum to remove pieces that were broken. Read more

$9.63

Compare At:: $11.56
You Save:: $1.93

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Water Inlet Valve

4.9 (13)

By: Whirlpool

Part Number: WPW10356257

This water inlet valve controls the flow of hot and cold water into the washing machine tub during fill cycles. It contains solenoid-operated ports that open and close in response to signals from the control board. Replace this valve if your washer is not filling with water, filling slowly, leaking from the back, or continuing to fill when it shouldn't.

Do-It-Yourself Stories from Customers like You No cold water into washer Jack F. • Altoona , PA • March 01, 2015

Replaced water inlet valve Read more

$93.95

Compare At:: $110.86
You Save:: $16.91

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Cap Seal

5.0 (4)

By: Whirlpool

Part Number: WP358912

Cap seal creates a tight barrier between cap and mating surface to prevent leaks. Replace when worn or damaged to restore secure fit. Confirm compatibility.

Do-It-Yourself Stories from Customers like You Agitator not working. Kenny H. • Bloomfield , IN • March 16, 2018

I used the parts recommended by the parts diagram.. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Drain Pump Filter

5.0 (2)

By: Whirlpool

Part Number: WPW10215093

Washer won't drain or clothes have residue? Replace the drain pump filter that screens debris and prevents clogs. Protects pump from damage.

Do-It-Yourself Stories from Customers like You The gears were rusted and stripped in the transmission and the hub was cracked. Blane L. • Columbus , OH • January 11, 2019

On a 3 year old Maytag...........New gear case and hub installed. The videos produced by AppliancePartsPros are quite helpful, even though the video was not of the exact make and model number I was repairing, the similarities were so great that it may as well have been the same make and model number (whirlpool and Maytag essentially make the same thing and slap I different sticker on them) Read more

$53.21

Compare At:: $63.85
You Save:: $10.64

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Water Inlet Valve Assembly

5.0 (6)

By: Whirlpool

Part Number: WPW10432353

Fix washer water leaking into tub or slow dripping when off. Water inlet valve assembly replacement stops fill valve leaks. Easy DIY repair with video.

Do-It-Yourself Stories from Customers like You Water inlet and lid latch switch Michael R. • Almena , WI • March 28, 2016

I ordered from this company expecting the parts to be later than they said and the parts showed up in 2 days like they said. Just before the Easter holiday even. Amazingly fast. Very satisfied!!! Washer is up and running again. Great job on getting me my parts! Thank you! Read more

$132.95

Compare At:: $158.21
You Save:: $25.26

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (4)

By: Whirlpool

Part Number: WPW10273971

This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.

Secures appliance components and panels in their mounting points
Replaces damaged, stripped, or missing hardware
Helps reduce rattling or vibration from loose parts

What's included: One screw Install notes:

Disconnect power; shut off water or gas supplies if applicable
Match location with the original screw; start threads by hand to avoid cross-threading
Tighten until snug; do not over-torque, especially into plastic or thin metal
Reinstall any covers or panels and test for secure fit

Do-It-Yourself Stories from Customers like You E3 F5 Stacy J. • Elk Grove , CA • August 03, 2018

In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again. Read more

$7.56

Compare At:: $8.32
You Save:: $0.76

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Upper Agitator Auger

5.0 (7)

By: Whirlpool

Part Number: WP3360824

Fix a slipping or freely spinning top agitator with this upper auger. Restores the ratcheting motion that pulls clothes down. Quick 3-minute repair.

Do-It-Yourself Stories from Customers like You Top agitator would not spin Daniel C. • Woodbine , MD • January 14, 2017

I have a 25 year old Kenmore washer that works well and didn't want to get a new washer as they don't make them like they used to. Upon removing the top cap of the agitator and doing an inspection, the agitator dogs were completely broken into pieces. Due to age we decided to replace the lower and upper agitator along with the agitator auger dogs repair kit. All new parts and works fine. On inspection of old parts, we probably could have gotten away with just a $5 repair for the plastic... Read more

$94.43

Compare At:: $112.37
You Save:: $17.94

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Agitator Assembly

5.0 (9)

By: Whirlpool

Part Number: WP389386

This is the central wash-action component in select top-load washers. Replacing a worn or damaged agitator restores proper agitation so clothes circulate through water and detergent for consistent cleaning performance. What it does:

Converts drive motion into the back-and-forth action that moves laundry
Circulates clothes to improve soil removal and reduce tangling
Replaces cracked, stripped, or loose agitators that cause weak or no agitation
Common symptoms include poor cleaning, clothes not moving during wash, or an agitator that wobbles or spins freely by hand

What's included:

1 agitator assembly

Install notes:

Disconnect power and turn off water supply before servicing
Remove the fabric softener dispenser and inner cap to access the center bolt
Remove the bolt, lift off the old agitator, seat the new agitator on the splined shaft, and secure the bolt
Reinstall the cap/dispenser; reuse original hardware as applicable and check for a secure fit before testing

Do-It-Yourself Stories from Customers like You Top agitator would not spin Daniel C. • Woodbine , MD • January 14, 2017

$93.40

Compare At:: $112.08
You Save:: $18.68

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Laundry Center Cycle Selector Switch

5.0 (4)

By: Whirlpool

Part Number: WPW10285512

Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.

Do-It-Yourself Stories from Customers like You Temperature control switch failed to cold only. Marilyn M. • Summerfield , FL • September 30, 2017

Replaced with a new one. Read more

$83.44

Compare At:: $99.29
You Save:: $15.85

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

110-20022012 Parts

Washer Lid Lock Bezel

Console Clip

Lid Hinge Bearing

Lid Bumper

Screw

Locking Nut

Washer Motor Start Capacitor

Washer Bleach Dispenser Cup

Washer Water Inlet Valve

Washer Cap Seal

Washer Drain Pump Filter

Washer Water Inlet Valve Assembly

Screw

Washer Upper Agitator Auger

Agitator Assembly

Laundry Center Cycle Selector Switch

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

110-20022012 Parts

We respect your privacy

Manage consent preferences