Need Help?
Call
Fix dirty water backing up into your dishwasher with this check valve assembly. Prevents backflow from sink disposal. Easy 30-minute DIY repair.
I checked the drain hose for blocking at the garbage disposal and then at the connection point to the dishwasher. The hose was clear and nothing was obviously obstructing where the drain hose connects to the dishwasher. At this point I Googled the model number with the term "will not drain" and immediately landed on the AppliancePartsPros.com website. At the Drain & Wash Impeller Kit page amazingly had a video showing the technician replacing the impeller on a dishwasher essentially the same as... Read more
Upper dishrack assembly for dishwashers. Slides on tracks to hold dishes on the top shelf. Replace if cracked, rusted, broken tines, or no longer stable.
Ordered the part from Appliance Parts Pros, it arrived about a week later and it was the correct part. I liked the cross reference and confirmation of the correct part that was available on the website before placing an order. Read more
Mounts the upper spray arm to the water supply manifold in your dishwasher. Replace if cracked, broken, or damaged from impact during rack loading.
It's an easy fix if you can find the right part. That's where AppliancePartsPros.com comes in. I input the model number and did a quick scan of the parts list. I found the part I needed, ordered it, and two days later I repaired the dishwasher. Read more
Secures tine rows to the dishwasher rack assembly. Replace broken, cracked, or missing clips that no longer hold tines firmly in place. Snaps on easily.
Put rack together and then unseated in dishwasher. Read more
The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation. Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components. Symptoms of a bad power cord include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
Seals the discharge connection on your dishwasher pump to prevent leaks during wash cycles. Replace if water pools under the unit. Verify fit by model.
I nearly shelled out for a new Kitchenaid when I remembered APP and entered my model # just for fun. The interactive diagrams and install videos showed where all the parts "should" be, mine were badly disintegrated, so I replaced the damaged ones and swapped out all of the other easily accessible seals and bearings (also gave it a good and very disturbing cleaning). My parts surprisingly arrived next day and for about $40, the dishwasher is quiet and works like new again. Read more
Gray protective caps cover damaged or rusting dishwasher rack tine tips. 125-pack slides over worn tine ends to restore your dishrack and protect dishes.
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure. Read more
Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)
While at my sister's house, she showed me how to access & dismantle the housing unit on her dishwasher, thinking the issue might be from that area. So, when I came home, I opened up my housing unit and found that several of the screws had come out and the pump outlet seal was stretched out and partially outside of the unit itself. I located all of the missing screws & discovered I was still missing one, which my husband helped me order with the pump outlet seal. I easily replaced the old seal... Read more
Grey vinyl touch-up paint for repairing chipped, rusted, or damaged dishwasher rack coating. 4oz bottle with brush. Restores protective coating.
Lower spray arm assembly with integrated shield for dishwashers. Replaces cracked, broken, or worn spray arms with torn center mounts or split rings.
Replaced upper and lower spray arms, plus nylon bearings. Read more
Dishwasher leaking from the bottom or not draining? A worn drain cover gasket often causes leaks at the sump. Moderate DIY fix stops water pooling.
Replaced the drain & wash impeller kit. Read more
Secures the middle wash arm manifold tube in your dishwasher. Replace if cracked, broken, or split from age or heat damage. Installs on manifold tube.
Ordered parts from web sight pictures came in 2 days and with new parts repaired in about 15 minutes Read more
Provides pivot point for dishwasher door spring to reduce wear. Replace if door drops, slams, or balance is off. Confirm fit with your model number.
I ordered the parts, deciding that if one spring had broken, the other one should probably be replaced at the same time. I followed the suggestion of ordering the door spring bearing given on the ordering page, and since I had not yet pulled out the dishwasher, did not know that it was not used in this older model. However, the order arrived quickly (4 days), and they are genuine Whirlpool, made in the USA, parts. The access to the sides of the dishwasher where the springs are attached... Read more
This replacement door spring maintains proper tension so the door opens smoothly and doesn't drop. Replace a weakened or broken spring to restore controlled, balanced door movement and everyday usability. What it does:
I ordered a pair of springs from AppliancePartsPros.com. When the new springs arrived, I unscrewed the frame from the counter top, slid the dishwasher out part of the way and installed the new springs and saved myself at least one-hundred dollars. Read more
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more
includes seal
Replaced nut and then found we needed new pump. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.