Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Front cabinet roller wheel for refrigerators. Mounts under the cabinet to allow smooth rolling and positioning. Replace if cracked, broken, or worn out.
Followed the instructions that was sent with wheel . wasn't to difficult. maybe 15 to 20 minutes total repair time,start to finish. Read more
Replace cracked, broken, or worn refrigerator door handles with this complete handle set. Includes handles for both doors with secure grip and finish.
I found the model no. of the refrigerator and copied it down. I googled refrigerator repair parts and there was Appliance Parts Pros. I used them in the past year for dryer parts for my Maytag dryer-another story, but the parts arrived the next day just after noon. I decided to try them again and my refrigerator handle arrived around 12:20 the next day. So maybe it wasn't a fluke after all. I ordered the handle even though the parts diagram only showed one (1) screw at the top and mine has... Read more
Center door hinge connects and supports refrigerator doors. Replace if bent, broken, or lost during moving. Guides smooth door operation and alignment.
Looked up parts on internet using diagrams, ordered parts, they arrived in 2 days and installed them. Read more
Freezer icing up and not defrosting? This defrost thermostat monitors evaporator temperature to trigger defrost cycles. Located behind freezer wall.
Took everything out and transferred it to coolers etc. Unscrewed and took freezer unit apart ..Evaporator fan not working and made decision to replace motor and bi metal defrost thermostat. Order parts from Appliance Pros. com and the unit was put back together and so far it corrected the problem. The instructions and service were outstanding. Great Company. Read more
Fix frost buildup in your freezer with this defrost heater. Melts ice from the evaporator coil during defrost cycles to restore normal cooling.
Replaced Defrost timer, Heater element and Bimetal-Def. Since the Refrigerator was older and the parts are not that costly I just replaced them all since I was in there. Read more
Cabinet roller axle supports refrigerator wheels for smooth movement. Replace if rollers wobble or fridge is hard to move. Verify fit with your model.
Watched the video on how to replace. Ordered new roller, which was delivered in just a couple of days. Since the roller had broke, I was unable to roll out the refrigerator, so I tilted the refrigerator back and placed a small furniture slider under the roller frame to prevent gouging the wood floor. Then it was easy to slide out the refrigerator and replaced the roller as explained on the video. I had ordered a pin and bolt, just in case I would need to replace, but didn't need them. ... Read more
Color: biscuit. It measures about 2-1/2 inches in diameter. For black order WP2186494B. For white order WP2186494W.
Replaced with new one and followed the instruction from the video that is on the order Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Replacement mounting screw for refrigerator panels, brackets, trim, and door handles. Restores secure fit when original fastener is missing, stripped, or corroded.
Easy 1 minute replacement. The real story was Appliance Parts getting the order to me next day as they stated and everything was correct. Thanks. Read more
Vertical duct that channels cold air from the evaporator through cabinet vents. Replace if cracked, broken, or blocked to restore proper airflow distribution.
Replaced the motor and fan blade. Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Metal support bar that mounts to the refrigerator liner to hold the crisper cover frame and glass level. Replace if broken, missing, or bent.
I had to cut down the length of the bar using a Dremel so that it would fit into the channels, it was originally too wide to fit into the fridge. One thing to note, only cut it as wide as the actual fridge; you can get it into the plastic shelf structure by sliding it too much into one side, and then guiding it into the other side. Read more
Color: clear. It measures about 12 inches wide by 6-1/2 inches high.
Ordered the part specific to my refrigerator... Received the shipped part super fast...Snapped it right into the frig...Including the opening of the box, the repair took less than 3 minutes... Read more
Supports the refrigerator door at the bottom pivot point. Replace if your hinge is rusted, bent, cracked, or broken to restore proper door alignment.
Cracked or missing humidity control? This body mounts on the crisper cover, restores smooth slider operation, and manages moisture in produce drawers.
Cleaned the slide areas really well and ordered new drawers. Read more
This ice maker shut-off arm is the wire lever that detects the ice bin level and stops production when raised. Replace a bent, broken, or missing arm to restore reliable on/off control of your icemaker.
Replaced the ice maker and needed a new arm. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.