Gsd1300nww Parts

The Sump Inlet is an OEM part for GE dishwashers. This part allows water to flow into the sump area, which collects and drains used wash water from the tub during the dishwashing cycle.

Causes of a bad part can range from clogs or obstructions preventing proper water flow, physical damage or cracks leading to leaks, or general wear and tear over time.

Symptoms of a bad Sump Inlet include:

• Failure of the dishwasher to fill with water
• Water leaks or puddling around the base of the dishwasher
• Excessive noise or gurgling sounds during operation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement part is an upper rack slide, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This upper rack slide is an important part of many appliances. This particular one is typically found in dishwashers and helps guide the upper rack in and out. This allows the user to have easy access to the rack in order to place and remove dishes before and after the cleaning process. A new upper slide rack might be needed if the current ones are broken or damaged in any way. It is possible that these slides become stripped over many years of use and need to be replaced. If the upper rack is tilted or not sturdy while being slid back inside the main tub, the upper rack slide might be the problem. Be sure the dishwasher is completely empty prior to replacing this part. This is a genuine OEM part and is sourced directly from the manufacturer. This upper arm rack slide is sold individually.

Color: white. It measures about 2 inches in diameter by 2-1/2 inches deep.

This fine filter assembly sits in the bottom of the dishwasher tub and screens out small food particles so recirculating water stays cleaner. Replacing a torn or warped filter helps restore wash performance and protects the pump and spray arms from debris.

• Traps fine debris to reduce redeposit on dishes and glassware
• Supports proper water circulation and spray pressure
• Helps shield the wash pump and spray arms from clogs or damage
• Replace if the mesh is torn, warped, missing, or persistently clogged; common signs include gritty residue or food left on dishes

• Disconnect power at the breaker before servicing inside the tub
• Remove the lower rack; if required, remove the lower spray arm and release your model's retainer (nut/clip/screws) to lift out the old filter
• Clear debris from the sump; seat the new filter flat and lock/secure it fully, then reinstall any removed parts
• The filter is locked in place before running a test cycle

This timer knob replaces the cycle control knob on select dishwashers. It mounts to the timer shaft so you can choose wash cycles; a cracked or stripped knob can make the timer difficult to turn or impossible to set.

• Mounts on the timer shaft to set and advance dishwasher cycles
• Replaces a broken, cracked, stripped, loose, or missing knob
• Helps when the timer won't turn by hand or the knob slips on the shaft
• Restores normal feel and alignment of the front-panel control

• Disconnect electrical power at the breaker before servicing.
• Pull the old knob straight off the timer shaft; do not pry on the console.
• Align the new knob with the shaft and press firmly until fully seated.
• Restore power and verify smooth rotation through all settings.

This arm valve installs in the dishwasher's spray arm feed to control water flow. It helps maintain proper pressure so the spray arm spins and distributes water evenly for effective cleaning.

• Directs water through the spray arm and helps maintain wash pressure
• Prevents unintended backflow that can reduce spray performance
• If worn, stuck, or missing, lead to weak spray or poor cleaning results
• Common signs include intermittent wash coverage or spray arm not rotating as expected

• Disconnect power and turn off water before servicing
• Remove the rack/spray arm or feed manifold to access the valve
• Note the valve's orientation and seat the new valve fully in the same direction
• Reassemble and run a quick cycle to check for proper spray and leaks

This is a hose chamber, or dishwasher hose pump. This part attaches to the back of the dishwasher and is the direct line for the water to get in and out during the washing cycle. This specific part prevents leaking and is very important to the machine. The user might need to replace this part if the dishwasher is leaking, if the machine is not putting in or draining water properly, or if the machine has stopped working altogether. Anyone can complete this repair with basic household tools such as a screwdriver, pliers, and working gloves. Always make sure the machine is empty of dishes and is drained of water before starting the repair. Also make sure it is unplugged from the electrical source and is turned off completely. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from manufacturers like General Electric, Hotpoint, RCA, and more.

The Dishwasher Upper Rack Kit 4 Pack is an OEM part for GE dishwashers. This kit includes four sets of studs and rollers that attach to the upper rack, allowing it to slide smoothly in and out of the dishwasher. 

Causes of bad studs and rollers can include regular wear and tear, exposure to high temperatures and water, or damage from heavy or improperly loaded items. 

Symptoms of bad studs and rollers include:

• The upper rack not sliding in and out smoothly
• The rack feeling loose or unstable
• Broken or missing studs and rollers
• The upper rack becoming misaligned or difficult to move

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher sump inlet forms the sealed passage between the tub and the pump system, directing wash water out of the basin. Replacing a cracked or clogged inlet helps stop leaks and restores steady water circulation and cleaning performance.

• Channels water from the tub into the circulation/drain system
• Maintains a watertight seal at the tub floor to prevent leaks and air intrusion
• Helps preserve spray pressure and consistent wash performance
• Common symptoms of failure: water leaking under the unit, weak cleaning results, unusual pump noise, visible cracks or warping

• Disconnect power and water supply; wear cut-resistant gloves and place a towel or shallow pan to catch residual water
• Access may require removing the lower spray arm, filters, and toe panel; note hose/clamp orientation before removal
• Clean sealing surfaces before seating the new inlet; secure per model design and ensure all connections are tight
• Reassemble and run a short test cycle while inspecting for leaks

This vent pad cushions and seals the dishwasher's door vent, helping route steam out of the tub while protecting the inner door and control area from moisture. Replacing a worn pad can help stop vent leaks and rattling.

• Creates a seal between the vent assembly and inner door liner to contain moisture
• Helps channel humid air during drying and reduces steam escaping at the vent opening
• Cushions the vent assembly to minimize vibration and noise
• Typical symptoms of a failed pad: steam or water at the top of the door near the vent, moisture inside the console, or a rattling vent

• Disconnect power at the breaker and shut off water before servicing
• Open the door and remove inner-door screws to access the vent assembly
• Note pad placement; install the new pad in the same location with clean, dry mating surfaces
• Reassemble and run a short cycle to check the vent area for leaks

Includes screws.

This leveling screw adjusts your dishwasher's leveling leg so you can set the cabinet height and get the unit perfectly level. Proper leveling helps the door seal correctly, reduces rocking, and cuts excess vibration and noise.

• Threads into the leveling leg to raise or lower the dishwasher for accurate leveling and stability
• Helps prevent rocking or wobbling and supports proper door alignment and sealing
• Can reduce vibration/noise associated with an out-of-level installation
• Replaces a stripped, bent, or missing adjustment screw to restore adjustability

• Disconnect power and turn off the water supply; protect flooring before adjusting or replacing
• Remove the toe-kick/access panel to reach the adjuster; support the dishwasher's weight before turning the screw
• Start threads by hand to avoid cross-threading; do not overtighten
• After adjustment, verify level side-to-side and front-to-back with a level and recheck door operation

Color: Black

This lower front toe kick panel restores a clean, finished look at the base of the dishwasher and helps shield the bottom area from debris and bumps. Replace a cracked, dented, or missing panel to secure the opening.

• Covers and conceals the lower access opening at floor level
• Helps protect base components from accidental contact and household debris
• Restores appearance when the original panel is damaged or missing
• Common symptoms: visible gap at the bottom front, loose or rattling kickplate, bent or broken panel

• Disconnect electrical power before servicing
• Open the door to access and remove the mounting screws holding the old panel
• Position the new panel, align tabs/slots, and reinstall screws—do not overtighten
• The panel clears the floor and does not interfere with door operation

Color: White