Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Lower Dishrack Roller is an OEM part for GE dishwashers. Good rollers allow the dishrack to slide in and out of the dishwasher smoothly. These rollers attach to the dishrack, providing mobility and convenience when loading or unloading dishes. Note: This kit includes one roller and one axle.
Causes of damage to the dishrack rollers often involve overloading the dishrack with heavy dishes, which can put excessive stress on the rollers, or normal wear and tear from repeated use.
Symptoms of a bad Lower Dishrack Roller Kit include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I found my parts and ordered the six I needed, however I did not pick up on the difference from the front wheels to the rear wheels in the the descriptions. The rear wheels are narrower and I ordered all front wheels, six fronts instead of four front and two rear. I made it work by using the axle from the new wheel with two old narrow wheels. Read more
The Soap Dispenser Lever is an OEM part for GE dishwashers. It operates the soap dispenser door, releasing detergent into the dishwasher at the appropriate time during the wash cycle. This lever ensures that detergent is dispensed efficiently for optimal cleaning performance.
Causes of a bad soap dispenser lever can include wear and tear over time, accumulation of detergent residue, or damage due to accidental mishandling or impact. When the lever malfunctions, the detergent might not be released properly, leading to poor cleaning results.
Symptoms of a bad soap dispenser lever include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more
The Detergent Cup Latch is an OEM part for GE dishwashers, specifically designed for certain models. It is located on the detergent dispenser assembly. When the detergent cup is loaded with detergent, the latch holds it in place and prevents it from accidentally opening or spilling during the wash cycle.
Causes of a faulty or damaged detergent cup latch can include regular wear and tear, misalignment, or breakage. These factors can result in issues such as the detergent cup not staying closed, detergent not being dispensed properly, or leaks from the detergent compartment.
Symptoms of a bad detergent cup latch may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispensed during the wash cycles, contributing to effective cleaning and drying.
Over time, the fill cap assembly can become damaged due to regular use, exposure to cleaning agents, or accidental mishandling. A compromised fill cap can lead to leaks or improper dispensing of rinse aid, affecting the dishwasher's performance.
Symptoms of a bad fill cap assembly include:
Using your program, I loaded the info re my trusty old dishwasher (not ready to abandon over a cap) and you located the proper cap to replace my old one that has been lost for years. [don't ask how that happened in the first place!] I really didn't think you would have a part for an 18-20 year old dishwasher. After ordering the replacement cap, it arrived within a few days. I was so excited that I could fix this problem myself without calling an expensive repairman! I simply removed the part... Read more
The Upper Rack is an OEM replacement part for GE dishwashers. It provides movable shelf space along the top of the dishwasher interior for washing plates, bowls, and other dishes. The shelves feature an adjustable design that accommodates various sizes and configurations of dishware. Causes of failure include normal wear and tear, accidental impacts that damage shelves or cleaning chemicals stripping away protective coatings. Symptoms of a bad upper rack can include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Found the correct racks on Appliance Parts.com. They shipped as promised. When I received them, however, I couldn't figure out how to replace the top rack. Didn't know how to get the end cap off Sooo - I went back on the website and watched the repair video and voila - was easy. All that was required was a flathead screwdriver and the knowledge of where to use it!!! Replacements in the dishwasher in 5 minutes or less. Great website and very helpful videos. I will recommend this website to... Read more
The Detergent cup cover is an OEM component for GE dishwashers. It serves to protect the detergent cup assembly while allowing for easy access. Made of durable plastic, the cover clicks securely into place during operation to prevent accidental opening.
Causes of a bad detergent cup cover include cracks or breaks from heavy use over time.
Symptoms of a bad detergent cup cover can include:
This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Although I ordered the latch, lever and a new cup and replace the original pieces the dispenser still did not close. On further inspection it turned out to be a small spring that had fallen out of place. Once the spring was reconnected the dispensing cover worked fine. I'm still happy that I replaced the entire assembly with new parts regardless. Discovering the loose spring took the most time. Read more
The Detergent cup spring is an OEM component for GE dishwashers. As part of the detergent cup assembly, this spring ensures the detergent cup door remains securely closed during the wash cycle. It provides just the right amount of pressure to keep dishes clean while preventing leaks or spills. Causes of a bad detergent cup spring include general wear and tear, repeated use breaking down the coils of the spring, or damage from forceful handling. Symptoms of a bad detergent cup spring are:
The Inlet Sump is an OEM replacement part for GE dishwashers. Located at the bottom of the dishwasher tub, the carefully contoured inlet sump collects and transports dirty wash water containing food debris to the filtration system. Its inlet ports and drainage routes optimize flow for thorough cleaning cycles.
Symptoms of a problem with the inlet sump include:
Causes can be normal wear and accumulation of debris over time. Mineral deposits from hard water may also cause drainage issues.
This part is also compatible with Hotpoint and some Kenmore dishwashers.
Replaced with a new Inlet Sump [WD18X213]. It was a little tedious, attaching the Inlet Sump, back to the pump, because I did the job with the dishwasher in place (not pulled out). My dishwasher was plumbed with copper pipe, so I really didn't want to upset that. Also, I had previously replaced the motor and the pump in this dishwasher, so I was familiar with how the Inlet Sump attached to the pump. Again, it's very tight working under the unit while it is still in place, and I wouldn't... Read more
The Dishwasher Door Cable is an OEM replacement part for GE dishwashers. It works with the door latch assembly to ensure secure closure of the dishwasher door. The cable is responsible for connecting the door handle mechanism to the latch, allowing users to easily open and close the door with a gentle pull or push. Note: It is recommended to replace both at the same time.
Symptoms of a bad door cable include:
Causes of a bad cable can be frequent use that results in wear and fatigue of the internal wiring over time. Damage from harsh detergents or excess moisture can also compromise the cable.
This OEM GE replacement part is compatible with models from Hotpoint, RCA, and some Kenmore dishwashers as well.
Replace a damaged upper/top dishrack to keep cups, glasses, and bowls secure and organized on the top level of your dishwasher. Restore smooth loading and dependable support when the original rack is rusted, bent, or broken.
Replaced the upper and lower racks. AppliancePartsPro shipped the racks fast and they are a perfect fit. I think they're even a better, stronger design then the factory originals. Read more
The Spray Arm Assembly is an OEM part for GE dishwashers. This component is located at the bottom of the dishwasher and is responsible for distributing water to clean the dishes during the wash cycle. It rotates to ensure that water reaches all areas within the dishwasher, providing thorough cleaning of the dishes.
Causes of a bad spray arm assembly can include clogging due to food particles or debris, wear and tear from regular use, or damage from improper loading of items. Such issues can obstruct water flow or prevent the spray arm from rotating effectively, leading to suboptimal cleaning performance.
Symptoms of a bad spray arm assembly include:
The replacement arm arrived promptly. Removing the old spray arm hub was very difficult by hand, plumbers wrench, or adjustable wrench. However, by inserting a screwdriver trough the two opposite holes where the tabs had broken off, it is relatively easy to unscrew the old hub. Read more
This OEM Replacement Part is a rubber connector with female threads. It is designed to provide a secure connection between the spray arm and the pump in a dishwasher. The connector measures 2-3/4 inches in diameter and 2-1/8 inches in height. This part is crucial to ensuring the proper functioning and efficiency of your dishwasher's spray arm pump.
Over time, the pump connector can wear out or become damaged due to repeated exposure to water, detergent, and high temperatures. This wear and tear can lead to leaks or a decrease in the dishwasher’s performance.
Symptoms of a bad pump connector include:
Note: This connector has female threads. For male threads use WD18X206.
In the How to fix it your self section of Questions and Answers, your answers for removing the Base Spray Arm is incorrect. It states "just stick a screw driver into the base spray arm from inside the tub and turn", that does not work. Their are 2 tabs that in gauge the base spray arm with the tub. A 4 prong round wrench is required to insert from the bottom into the pump connector and turn the nut that sits inside. Read more
The Drain Hose is an OEM part for GE dishwashers. This part carries the wastewater from the dishwasher to the household plumbing, ensuring efficient and effective drainage after each wash cycle.
Causes of a bad drain hose can include regular wear and tear, kinks or bends that restrict water flow, or damage from improper installation.
Symptoms of a bad drain hose include:
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips. Read more
The Heating Element Assembly is an OEM part for GE dishwashers. This part heats the air during the drying cycle, ensuring that dishes come out dry and free of water spots.
Causes of a bad heating element can include mineral buildup from hard water, electrical issues such as a short circuit or faulty wiring, or general wear and tear over time that leads to reduced efficiency or failure.
Symptoms of a bad heating element include:
Replaced heating element. Read more
The Drain Solenoid is an OEM part for GE dishwashers. This component controls the draining function by opening and closing the drain valve, ensuring that water is properly expelled from the dishwasher at the appropriate times during the wash cycle.
Common causes of a bad drain solenoid include electrical malfunctions, buildup of debris or mineral deposits, and general wear over time. These issues can prevent the solenoid from operating correctly, leading to improper draining.
Symptoms of a bad drain solenoid include:
Took the washer out, turned it over and found the solenoid that worked the drain valve to be melted, and the shaft that the solenoid activates was heavily corroded. I found the right parts on your website after reading the notes left by other customers, then watched the video. The repairs were fairly simple and successful. This was a GE profile dishwasher. Read more
This rinse aid tank is the reservoir inside the dishwasher dispenser that holds liquid rinse agent and releases it during the final rinse. Replacing a damaged tank helps restore proper dispensing, reduce spotting, and prevent leaks at the dispenser.
Repair parts arrived super fast. Installed the new parts according to the supplied instructions. All went well. It took over 2 hours because the unit had to be removed after the water and power were disconnected and then the initial problem diagnosed (motor brushes worn beyond service limits). The removal of the spray bar tower assembly was a challenge until it was discovered that the tower unscrews in a CW direction from the bar that then allowed access to the attachment screw that holds that... Read more