Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Drain Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub to the drain pipe, facilitating the drainage of water after a wash cycle is complete.
Causes of a bad drain hose can include regular wear and tear, blockages from debris or lint, cracks or splits due to aging, or damage from improper installation or handling. A compromised drain hose can lead to water leaks and drainage issues.
Symptoms of a bad drain hose include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This hose did not just attach to the back of the washer--that would have been too easy. This hose went into the back of the washer, under the tub & attached to the pump at the front of the washer. Both the back & front of the washer had to be removed to access the hose. Luckily the crack was at an external spot where it was easily seen; unluckily my husband was out of town at the time & I had to take the washer apart & put it back together. Actually it was not that hard. Before I took the... Read more
Plastic washer that fits between the door hinge and cabinet body. Replace if cracked, worn, or missing to restore smooth door operation and alignment.
By purchasing two replacement thimbles and two hinge washers. Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
Took off cover, installed new parts. Read more
The Shock Absorber Kit is an OEM part for Whirlpool washing machines. This kit includes 4 shock absorbers designed to reduce vibrations and absorb shocks during the washing and spinning cycles, providing stability and minimizing excessive movement of the washer drum.
Causes of a bad shock absorber can include wear and tear from regular use, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling.
Symptoms of a bad shock absorber kit include:
Replaced shock absorbers. Read more
Rubber vent hose that connects the wash tub to the dispenser, allowing air circulation. Replace if cracked, leaking, or detached from the tub assembly.
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time. Read more
Suspension spring kit for washers. Supports tub weight and absorbs vibrations. Replace if springs are broken, stretched, worn, or missing. Includes 2 springs.
First remove the back from the washing machine. Top of the machine came off simple. To replace springs, I took a crow bar but it on the right side underneath where one of the springs should be. Lift the tumbler up remove and replace the spring. Did the same thing to the other side. On the tumbling unit there are spaces for three shock absorbers. Mine only had one shock in the middle. I put two new springs, one in the front and one in the rear. Then I replaced the right side spring with two new... Read more
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Replaced flow meter and control valve Read more
This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.
Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine. Read more
Replaces broken or cracked drum baffle in front-load washers. Lifts and tumbles clothes during wash cycle. Snaps into drum interior. Easy DIY install.
After doing quite a bit of research and asking appliancepartpros forum if I needed to add a screw when installing, and receiving the answer the next day that is was not necessary, I snapped the part in place and went on with life. Read more
Replaces a cracked, broken, or missing drum baffle in your washer. Snaps into the inner tub to lift and tumble clothes during wash cycles. Easy DIY repair.
Ordered parts friday at 4:30 pm installed parts by 5:30 pm saturday even though they came from Kentucky and I live in Rural Kansas. Parts just snapped in no tools required. Read more
Fix water leaking from your detergent drawer. This dispenser holds and releases detergent, softener, and bleach at the right time. Easy DIY repair.
I was moving my washer and dryer on to a platform when the washer slipped and the drawer came out and broke. I was going to surprise my wife with this new setup. She was out of town and was due back in 3 days. I didn't want her to see my mistake. I got on line and found AppliancePartsPros.com and I am glad I did. Their price was reasonable and fair. I order the parts I needed late on Wednesday and they were delivered early on Saturday. I watched their self help video on how to replace the parts... Read more
Fix F20 error codes and water level issues with this washer air chamber. Connects to the pressure switch hose to regulate water fill. Easy DIY repair.
After having a technician come to look at my washer, diagnosing the problem, and then not having the part to fix it (which would've taken another week or so after the washer was down at this point for a week and a half) I decided I could fix it myself. The problem ended up being the styrofoam piece that was meant to protect the hose from rubbing on anything didn't do it's job. The result ended up causing a pin hole size puncture in the hose which was allowing air to escape. That hose, along... Read more
Washer stops mid-spin or shows F6E1 error? The motor control board regulates drive motor speed and direction. Most DIYers replace it in 15-30 minutes.
On-line chat with AppliancePartsPros told me the error code was was for motor speed and they sent me a .pdf file on what to do to T/S it. Following the sheet I checked motor and Tack resistance and wiring - all OK, so I ordered a Motor Controller Ckt board assy. It arrived in 24 hours, during that time i watched the replacement videos and removed the old part. Upon receiving the new part I installed it (15 min), tested the washer (it worked), then put all the panels back on, pushed the washer... Read more
Secure dryer vent hose to exhaust outlet and wall connection. Replace worn clamps to prevent duct slippage and maintain proper airflow. Confirm fit.
Replaces broken or worn washer shock absorber that controls tub movement during spin. Installs on washer suspension to reduce vibration and shaking.
I took the front panel off which exposed the front two shock absorbers. But I could still only replace the front left shock. I could not get access to the one on the right. I then took the back panel off which gave me access to both back shocks and the other front shock. A simple twist and they were done. The longest part of the job was taking the back panel off. Read more
This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.