Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix loud grinding noise or poor water circulation in your dishwasher. This pump and motor assembly circulates and drains water. Moderate DIY repair.
We initially noticed the dishwasher running loud and failing to completely clean dishes. Research suggested issues like this were normally caused by either the main circulation motor or the drain motor. Over the next week the noise worsened, and it became obvious that the circulation motor had went (loud whirring noise whenever the spin cycle kicked in). I watched a couple youtube videos on the removal and dissassembly until I felt confident that my wife and I could handle the project. For the... Read more
Dishwasher leaking from underneath? The float switch kit controls water level and stops overfilling. Typical repair time 10-30 minutes.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
Middle spray arm for dishwashers. Installs in the center of the tub to distribute water during wash cycles. Replace if cracked, broken, or spray holes are damaged.
I called to ask about the correct gasket for the door. As VERY helpful lady suggested that it was probably a split arm spray. She was absolutely correct. I have used you web site for parts in the past and will always make it my first stop when ordering appliance parts. Read more
The water manifold probe monitors water flow in your dishwasher's spray system. Replace if bent, melted, cracked, or broken to restore proper water distribution.
Ordered necessary parts. Parts were received the next day!! Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.
I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without... Read more
The Screw is an OEM part for Whirlpool dishwashers. It secures the spray arm to the dishwasher, ensuring it rotates properly to distribute water evenly throughout the dishwasher during cleaning cycles.
Common causes of a faulty spray arm screw include wear and tear from regular use, corrosion from exposure to water and detergents, or damage from improper installation or removal.
Symptoms of a bad spray arm screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set. Read more
If your detergent dispenser is loose or falling off, this bracket secures it to the door panel. Moderate DIY repair requiring door disassembly.
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself! Read more
Replace your cracked, rusting, or damaged lower dishwasher rack. Restores smooth loading and secure dish placement. Installs in bottom position.
Got a new one. Old one was white plastic coated. The new one is silver a little different in loading and a little smaller Read more
The ProScrub Manifold is an OEM part for Whirlpool dishwashers. This manifold is a crucial component of the ProScrub feature, which delivers powerful jets of water to target and remove tough food residues from dishes. It ensures that water is distributed effectively throughout the dishwasher for optimal cleaning performance.
Common causes of a bad manifold include blockages from food particles, wear and tear from regular use, or physical damage.
Symptoms of a bad ProScrub Manifold include:
This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
The old part comes out with a quick tug. The new part "snaps" in place. Very simple installation. Read more
The Screw Hole Cap is an OEM part for Whirlpool dishwashers. It covers the screw holes, providing a clean and finished appearance while preventing moisture and debris from entering the screw openings. This helps maintain the dishwasher's aesthetic and ensures that screws remain protected from rust and corrosion.
Causes of a bad screw hole cap can include regular wear and tear, accidental impacts, or misplacement during maintenance.
Symptoms of a bad screw hole cap include:
I ordered the part and it was delivered the next day! Amazing experience! Read more
Secures tine rows in upper or lower dishwasher rack. Replace if cracked, broken, or missing. Clips into place in seconds—no tools required.
Purchased the items and installed in less that a minute. Read more
Covers and seals the rinse aid compartment to prevent leaks and ensure proper dispensing. Replace if damaged, melted, or missing. Verify fit with your model.
I found the part on AppliancePartsPros - great site, easy to use and quick delivery. This isn't a big deal - except I was able to do this without leaving my home! Read more
Replacement axle for dishwasher upper rack height adjustment mechanism. Needed when the axle is broken, cracked, or missing from the rack roller assembly.
Replaced complete roller- screw,wheel and axel. Easy job Just recently I had to replace upper spray arm. I ordered assembly from you and was completely satisfied with your service and price, that was over 1/2 of what local appliance repair dealer wanted. Very satified with how to do video on this project Read more
The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation. Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components. Symptoms of a bad power cord include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)
I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.