Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dryer drum roller axle mounts to the rear panel and supports drum rollers. Replace if bent, worn, or wobbling. Helps eliminate noise from damaged axles.
Replaced the tension pulley assembly, drum rollers, drum roller axles, belt, and drum glides while I had the dryer disassembled. It turned out that the cause of the squeak was the tension pulley assembly, however it was easy and economical enough to replace anything that could have been the cause of the squeaking while I had the dryer apart. The parts were ordered on Thursday afternoon and delivered on Friday. I had the dryer repaired and running like new in no time. For about $100, it was... Read more
Secures the water filter and connects it to the supply line. Replace if your filter leaks, pops out, or won't stay seated. Verify fit with your model number.
Turned off water behind the fridge. Unscrewed housing that covered water lines behind the filter base with a 1/4" socket. Pulled out the water hoses by pulling forward on the blue ring holding the hose while pulling the hose backward. Unscrewed the two screws below the filter base. Used the 1/4" socket to remove four additional 1/4" nuts holding the front housing until it partially dropped. I kept the housing propped on a jar. Unscrewed two additional screws holding the filter release rod in... Read more
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements. This part fixes the following symptoms:
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
Dryer won't start or stops mid-cycle? A worn door catch prevents secure latching. This assembly holds the door shut so your dryer runs. DIY-friendly repair.
I called a local appliance store that gave us a replacement. That one broke after 1 week! The door was off balance. Tightened screws to realign. I found your store online and ordered the part. Arrived in 1 day! The part is much stronger than the first one. So far so good! Read more
This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.
I had purchased a model refrigerator that did not come with the deli/meat pan, and I was told by the manufacturer's customer service department that my purchased model was not designed with the item. I made comparisons with other models that had the deli/meat pan and found that the shelving alignments were the same so I decided to improvise and install the deli/meat pan. The manufacturer's customer service department did assist me with obtaining the appropriate part numbers and I placed the... Read more
Insulating foam that installs on the ice chute door to prevent warm air and moisture around the dispenser. Replace if compressed, cracked, or missing.
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more
This drum support roller installs inside your dryer to support and guide the drum as it rotates. Replace if cracked, worn, or causing noise during operation.
Replacement actuator paddle for refrigerator ice and water dispensers. Installs on the freezer door. Needed when the original is cracked, broken, or missing.
Removed complete housing, including the actuator to dispense ice; plastic cemented, with reinforcing strips of cloth to reinforce repair on left hand side of assembly. Then installed new actuator part from Appliance Parts, plugged in wires, then had to plastic cement the pack on back of the new actuator back on, as it had come loose. Reassembled all, and finally managed to get the water discharge tube back through the hole, than replaced the flat strip connector & replaced all screws. Works... Read more
Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from... Read more
The Damper Assembly is an OEM part for Frigidaire refrigerators, crucial for regulating the airflow between the refrigerator and freezer compartments. This part plays a pivotal role in maintaining the desired temperature in your refrigerator, ensuring your food remains fresh and safe for consumption. Note: Damper Control w/ one switch, if you need a Damper Control with two switches, order part# AP3772850.
Causes of a bad Refrigerator Damper Assembly can involve normal wear of internal mechanisms responsible for damper rotation. Mineral accumulation on electronic sensors may hinder proper damper response.
Symptoms of a bad Damper Assembly include:
This genuine OEM Frigidaire is also compatible with Electrolux, Gibson, and select Kenmore models.
This issue was with a refrigerator that we acquired with a house we bought. The freezer was cold, making ice well, overall doing great. The refrigerator was not cold however. I had this issue with our own refrigerator in the past, and it was related to the defrost fan not working and the coils freezing up. However this refrigerator's coils had no ice buildup. Doing some searching on the internet I was able to narrow it down to the damper between the freezer and refrigerator not opening... Read more
Plastic bearing that sits in the upper hinge, allowing the refrigerator door to swing smoothly and quietly. Replace if cracked, worn, or broken.
Went to site at 4pm central, found part, watched repair video, ordered part, part arrived NEXT MORNING, replaced part, door works perfectly. Total time for web research, ordering AND repair: Less than 30 minutes. Total cost with delivery: $21.66. Door works just like new. It doesn't get any better than this folks. Read more
Torsion spring that returns the dispenser ice chute door to closed position. Replace if broken, weak, or missing to restore proper door closure.
Fix burners that won't turn off, heat incorrectly, or don't respond to temperature settings. This dual element control board regulates power. 10-15 min DIY.
Had to replace the whole control dual element. Part came very quickly, and replacement was also a snap. Read more
Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.
First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more
Includes service line.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Ice won't dispense or only comes out crushed? Your ice bin and auger assembly may be broken. This stores ice and drives it out for dispensing. 5-min fix.
Replaced Ice Container and Auger Assembly. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.