Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lwmt72uv Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489483

The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely. 

Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.

Symptoms of a bad screw include: 

  • Loosened or detached components that were once fastened 
  • Reduced structural integrity of connections or assemblies
  • Potential safety hazards if critical parts become dislodged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Missing hinges to hold the door up   Sandra C. • Gardena , CA • June 05, 2016

Found the parts in the diagram of my fridge and simply installed it very easy Read more

More
$11.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Fill Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

Do-It-Yourself Stories from Customers like You Low water flow and fabric softener would dispense immediately when cycle started   Bob G. • Sylacauga , AL • January 19, 2019

Replaced flow meter and control valve Read more

More
$19.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414

Specs: 10-16 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Dryer drum was beginning to stall occasionally   Dana J E. • San Marcos , CA • March 17, 2015

After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw, 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

  • Fastens panels, brackets, covers, or internal parts to the chassis or frame
  • Helps maintain alignment and support, reducing rattle, vibration, or looseness
  • Replaces missing or damaged screws that have backed out, broken, or stripped
  • Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
  • Disconnect power; shut off water or gas supplies before servicing
  • Use the correct driver; start threads by hand to avoid cross-threading
  • Match length and thread to the original location; do not substitute with longer hardware
  • Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range   Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

More
$21.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Adjustable Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer   Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

More
$16.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Main Bearing Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP40004201P

Supports and centers the spin basket and drive shaft for smooth, quiet rotation. Replace if washer makes loud roaring or jet engine sounds during spin.

Do-It-Yourself Stories from Customers like You Noisy washer due to bad main bearing assembly caused by water leak of the tub   Sotirios P. • Placentia , CA • October 16, 2014

I decided to repair my Amana LWA50AW top loader washer because it has served us well, it is made by Speed Queen and an equal replacement is expensive. These are very dependable washers. The parts I ordered were: part #R9900552 (hub and seal kit) This kit does not include the Tub or Main bearing!!! Nor the drive belt!!! The main bearing is what is attacked by the water due to leaks and makes a jet engine sound as the tub spins faster and faster. Any way, the kit should be updated to include... Read more

More
$65.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP40053901

Fix washer leaks caused by worn or split drain hoses. This hose channels water from pump to drain. Common repair, typically takes 45-60 minutes to replace.

Do-It-Yourself Stories from Customers like You Leaking washer   Adam E. • Sacramento , CA • April 14, 2015

The drain hose had rubbed against a metal piece until a split was formed. There was only one clamp to remove to get the old hose off. The repair took about an hour to complete. Amana distinctions washing machine. Read more

More
$55.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Flume Hose Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002749

This flume hose kit replaces the flexible hose that routes water from the dispenser/fill flume into the washer tub. Restoring a tight, unobstructed hose helps prevent leaks and ensures detergents, bleach, and softener are carried into the wash.

  • Directs fill/dispenser water from the flume to the tub during wash and rinse
  • Restores proper flow so dispenser compartments empty correctly
  • Helps prevent leaks caused by splits, brittleness, or loose connections
  • Typical symptoms: water on the floor, dispenser not draining, weak flow into tub, musty odor near dispenser
What's included: 1 flume hose Install notes:
  • Disconnect power and shut off water supply before servicing
  • Access the dispenser/flume area by removing the top or control panel per your model
  • Note hose routing; transfer and secure clamps; avoid kinks and rub points
  • Run a quick fill/rinse to check for leaks at both connections after installation

Do-It-Yourself Stories from Customers like You Leaking water from high in back of unit; not tub or pump   Greg W. • Austin , TX • April 29, 2015

I figured it had to be the flume; changed the flume and hose, mounting screws Read more

More
$18.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP25-7893

This factory replacement screw fastens the specified components in your appliance as shown in the parts diagram. It restores a secure fit and helps eliminate looseness, vibration, and noise when an original fastener is missing, stripped, or corroded.

  • Secures panels, brackets, and assemblies at the locations designated for your model
  • Direct replacement for the original fastener to maintain proper fit and alignment
  • Replace when threads are damaged, head is rounded, or rust is present
  • Common symptoms: loose or rattling parts, gaps/misalignment, increased vibration
What's included: 1 screw Install notes:
  • Disconnect power and shut off water supply if applicable before servicing
  • Refer to your model's parts diagram for exact location and quantity
  • Start threads by hand to avoid cross-threading; use the correct driver bit
  • Snug firmly but do not overtighten to prevent stripping

Do-It-Yourself Stories from Customers like You The hinges on the cover were broken   Richard P. • Long Beach , NY • April 11, 2015

Contacted the appliance parts pros, found the parts needed, watched the repair video and installed the parts Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

  • Fastens a hose to a barb or port to prevent leaks
  • Helps keep hoses from slipping off due to vibration or pressure
  • Restores proper sealing when a clamp is rusted, bent, or stripped
  • Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten
What's included: 1 hose clamp Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Place a towel to catch residual water when removing hoses
  • Position the clamp just behind the hose barb/bead and secure with the appropriate tool
  • Restore water and power, then run a quick check for leaks at the connection

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Leaking bleach tube   Mike C. • Willow Grove , PA • May 21, 2017

Replaced the tube and the clamp Read more

More
$7.49

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Lid Switch Actuator
Genuine Whirlpool part
By: Whirlpool
Part Number: WP43-0057

Washer won't start or spin? A broken lid switch actuator prevents the safety switch from engaging. This plastic striker restores proper operation in 5 minutes.

This part fixes the following symptoms
  • Won't start
  • Will not agitate
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You Lid switch   Steven I. • Gainesville , GA • July 24, 2016

Replace the broken switch Read more

More
$49.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Leveling Leg (Rear, Self-Leveling)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22004469

Replace a worn rear self-leveling leg to restore a stable, level appliance. This foot supports the back of the cabinet and automatically compensates for floor unevenness to help reduce vibration, rocking, and noise during operation.

  • Supports and self-levels the rear of the cabinet to maintain stability on uneven floors
  • Helps address wobbling/rocking, excessive vibration, rattling or "walking," and an appliance that won't sit level
  • Replaces a rear leg that is missing, cracked, or worn
  • Promotes smoother operation by helping the unit sit properly level
What's included: 1 rear self-leveling leg Install notes:
  • Disconnect power; if applicable, turn off the water supply
  • With assistance, carefully tilt the appliance to access the rear base
  • Remove the damaged rear leg from its mount and install the new leg, ensuring it seats fully
  • Lower the unit, verify level with a bubble level, and adjust front legs as needed for final leveling
Also known as: self-leveling foot, rear leveling foot

Do-It-Yourself Stories from Customers like You Severe vibration during washer spin cycle.   Robert G. • Richmond , VA • January 15, 2018

I followed the Appliance Parts Pro's advice videos for the Maytag MAV6451AWW Atlantis washer on replacing the snubber ring and the suspension springs. Everything went just fine except replacing the two rear most suspension springs. None of the videos illustrated REINSTALLING the REAR springs which is extremely difficult because you can't get enough leverage with your arm extended. Observing my frustration, my wife recommended taking off the back side. You can't simply take off the back,... Read more

More
$8.69

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Hose (With Bend)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001872

This washer drain hose routes wastewater from the drain pump to your standpipe or laundry tub. Replacing a cracked or kinked hose restores reliable draining and helps prevent leaks during the spin/drain cycle.

  • Connects the washer's drain outlet to the household standpipe or laundry tub
  • Molded bend helps position the hose correctly and reduces kinking
  • Typical symptoms: water leaking at the back or onto the floor while draining
  • Visible splits, soft spots, brittleness, or abrasion on the hose
  • Slow or incomplete draining caused by kinks or internal blockage
What's included: 1 drain hose Installation notes:
  • Disconnect power and move the washer to access the rear; shutting off water is recommended as a precaution
  • Place towels or a shallow pan to catch residual water when removing the old hose
  • Transfer and reuse existing clamps/brackets if required; fully seat and secure connections, and route the hose to avoid kinks or rubbing
  • Insert the outlet end properly into the standpipe or tub per your model's instructions, then run a quick drain/spin to check for leaks

Do-It-Yourself Stories from Customers like You Drain hose was cracked   Lewis M. • Berkeley Springs , WV • October 13, 2014

Bought a new hose and took one small cover off the back of machine, used pliers to remove clamp, took off old hose, put on new, replaced clamp, replaced cover and was done. Five minutes tops. Read more

More
$54.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP28808

Drive belt transfers motor power to transmission and spin mechanism. Replace when belt shows wear, causes slipping noise, or burning smell. Confirm fit with model.

This part fixes the following symptoms
  • Burning smell
  • Will not drain
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Loud noise   Darrell H. • Largo , MD • December 19, 2014

First i had to remove the belt from the drum pulley. i had to actually remove the motor from the washing machine. carefully remove the two water hoses attached to the pump...have a towel ready...there will be a few cups of water left in the hoses. remove spring from tension pulley then remove the pump that was attached to the motor. you will need a set of hex keys to remove the pump. then you can remove the belt from the drive pulley. reinstalled new belt around drive pulley and reinstalled... Read more

More
$57.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Inlet Hose Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY013783

This is a rubber gasket that sits inside the water inlet hose connection on your washing machine. It creates a watertight seal between the hose fitting and the water supply valve to prevent leaks. Replace this gasket if you notice water dripping from the hose connections at the back of the washer.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Pretty much everything   Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

More
$6.72

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Water Inlet Valve Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 35-2374N

This water valve kit regulates the flow of hot and cold water into your appliance during fill. Replace a weak, leaking, or stuck valve to restore consistent fills and proper shutoff, resolving common no-fill, slow-fill, or seeping issues.

  • Controls incoming water to achieve correct fill levels and temperature mix
  • Addresses no fill, slow/partial fill, or water seeping into the tub when off
  • Replaces valves that are electrically failed or mechanically clogged/sticking
Includes: One water inlet valve kit Install notes:
  • Disconnect power and shut off both water supplies before servicing
  • Have towels ready; relieve hose pressure and note wire/hose locations (take a photo)
  • Transfer any mounting parts from the original valve if required; avoid overtightening plastic fittings
  • Restore water slowly, check for leaks, and run a test fill

This part fixes the following symptoms
  • No hot or cold water
See more...
Do-It-Yourself Stories from Customers like You Hot water solenoid on water valve not working   James L. • Dagsboro , DE • June 17, 2014

Removed old water valve and replaced it with new one. Reconnected wiring and water lines. Everything is working fine now. Read more

More
$189.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google