Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This water level switch senses the dishwasher's tub float and controls the water inlet. Replacing a worn switch restores correct filling, helping prevent overfilling or dry cycles that can reduce cleaning performance. What it does:
What's included:
Install notes:
I called and talked to a customer service rep and she helped me troubleshoot the problem and order the correct part. She also sent me the pdf of the repair manual and I followed its instructions to replace the drain solenoid. It was a fairly easy repair. I wasn't sure if I would need the water level control switch, but I ordered it to be on the safe side. Turns out the original is still good. Read more
Replacement lower spray arm for dishwashers. Installs at the bottom of the tub. Replace if cracked, corroded, or missing to restore proper water distribution.
Found that a lot of the moving parts were plugged and as a result dishes were not getting enough water pressure to clean. Replaced a lot of the moving water flow parts. Site even had how to do videos to help. Dishwasher works great now. Quick, inexpensive solution. Read more
This dishwasher door spring provides the counterbalance tension that lets the door open and close smoothly. Replacing a worn or broken spring restores proper door feel and helps prevent the door from dropping unexpectedly.
New spring and cable Read more
Redirects spray water away from the door opening to prevent leaks and splash-over. Replace if cracked, warped, or missing. Confirm fit by model number.
After discovering your web site and reading of others issues I ordered a door seal (my old one was a little short on the right side) a detergent door grommet, and the 2 water deflectors ( I decided to cover all the bases while I was at it. Very simple job with the information provided on your web site. I certainly have the confidence to tackle other appliance repair now. Read more
Dishwasher door latch includes the two switches. Handle not included. For the handle order WP99002836.
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them. Read more
Upper dishwasher rack adjuster assembly. Right hand side. For the left hand side order WPW10153530.
Purchased replacement roller assemble and installation was straight forward. Read more
Located on the supply tube behind the upper dishwasher rack.
Dishes were 'gritty' with an almost invisible coating of specks smaller than grains of salt. Prior to ordering parts, I had to determine which part(s) needed replaced and which could benefit from a good cleaning. After viewing Appliance Parts Pros YouTube Videos, I removed the Main Manifold (snaps right off) including the Top Spray Arm. I discovered the Flappers of the Docking Station (AP6009888) were worn out and/or missing. I removed the Docking Station simply by popping the old one off... Read more
Seals the air/water inlet where it meets the tub to prevent leaks. Replace if you notice water dripping during cycles. Confirm fit with your model.
Replaced the seal at the Air/Water inlet and also replaced the drain hose. Drain hose had a worn spot due to vibration rubbing on the floor Read more
This knob controls the rinse aid dispenser setting in your dishwasher, allowing you to adjust how much rinse aid is released during the wash cycle. It typically has numbered settings from low to high dispensing amounts. Replace it if you can't adjust the rinse aid flow, the knob is missing, or if it won't stay in the selected position.
Was easy to locate exact part needed by inputting model number Received my part in under a week. Great site for parts Read more
Lower rack fold-away tine row for dishwasher. Replace when tines rust, break, or no longer fold properly. Verify fit with your model number listed.
Replaced the tines. It was a piece of cake! Read more
Color white. The wash arm measures about 11 inches, and the retainer about 3 inches.
Spun each of the three wash arms by hand. All could be made to touch/scrape but the top one was super wabbly. Ordered both the arm and clip. Repair took less than a minute. Used a screwdriver to pry loose one side of the old clip to remove. Aligned the new parts and easily snapped into place. Read more
Right hand side. For the left hand side order WPW10153533.
Replaced rack adjuster assembly on both sides. Easy repair, and the parts arrived within 2 days. Replacement parts appear to be better designed to prevent the roller shafts from failing. Hint: The rollers on the top rack seem to be the same. I removed and saved the rollers and shafts from the old parts in the event I have to replace those on the top rack someday. Read more
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
This plastic component holds individual tines in proper position on your dishwasher rack, keeping them aligned and secure during wash cycles. Each tine row contains multiple plastic prongs that hold dishes and utensils in place. Replace this tine row if individual tines are broken, missing, or no longer hold dishes securely in position.
I ordered new replacement parts. Read more
Note: Check Serial Number for correct part
I installed the door latch assembly and handle. It worked fine after that. Read more
This O-ring creates a watertight seal in your dishwasher's wash or drain system, helping prevent leaks and maintain proper water pressure. Replace a brittle, flattened, or damaged ring to restore a reliable, leak-free connection.
Removed 8 screws that retain inner door to outer door. Removed rinse aid dispenser nut and replaced O-ring around dispenser. Also, removed 2 screws that retain the latch assembly and replaced rubber grommet around latch lever that retains soap dispenser door. Read more