Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is a small plastic or rubber fitting that secures the power cord where it enters the dishwasher's junction box or base. It prevents the electrical wiring from being pulled, kinked, or damaged by absorbing tension on the cord. Replace this part if it is cracked or missing, which can leave wiring exposed and vulnerable to damage during installation or use.
Perfect thanks. Read more
Dishwasher lower door seal prevents water leaks at the door base. Replace if you notice dripping or moisture during wash cycles. Confirm fit with your model.
Thanks to Jason and his tech people at Appliance Parts Pro, I was able to remove and replace the seal and eliminate all leaks at the bottom of the door. I have a Kitchenaide (Whirlpool) dishwasher model KUDC10IXBL1. Here is how to replace the bottom door seal. 1) Shut off breaker to dishwasher on the electrical panel. 2) Open the dishwasher door completely, and while supporting the door, remove the hex head screws that hold the outside cover. 2) Close the door carefully and slip the outside... Read more
Usually ships within 4 - 14 days
Broken detergent door latch or dispenser won't close? This dishwasher dispenser assembly fixes soap release issues. DIY repair takes about 1 hour.
Since door latch parts are not available, I replaced the entire dispenser assembly. While waiting for the part to arrive, I watched the installation video, which made the installation quite easy. Read more
Dishwasher leaking from underneath? The float switch kit controls water level and stops overfilling. Typical repair time 10-30 minutes.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
Fix water leaking from under your dishwasher with this pump volute. Directs water flow and prevents leaks with integrated seal. 20-minute repair.
I reviewed the schematic and saw the Volute Seal, and Impeller Seal were the two that were closest my source of water. After watching the video about changing the Impeller/seal I removed the motor, impeller, and volute; I found that the impeller seal was the faulty one in my case. Since I'd ordered the volute and impeller seal kits (as I wasn't sure which it was) I installed both while I had it apart. Runs great, no water - simple to do. The seal changes took about 20 minutes. The only... Read more
Replace this dishwasher upper rack wheel when your top rack binds, wobbles, or pops off the track. Restores smooth gliding on rails. Confirm fit with model.
Fix was easy however, part was shipped from Louisville which is 20 miles from me. It went to Indianapolis then to Independence Ky then to me. Duh, took 5 days. I could have driven to get the part and been home in 90 min. lol Read more
Fix a dishwasher that won't start, cycles won't change, or lights flash with this electronic control board. Coordinates all wash and drain functions.
Replaced control Read more
Leaking rinse aid or spotty dishes? Replace your dishwasher's rinse aid dispenser cap to seal the reservoir and restore proper dispensing. Simple DIY fix.
Inserted the new cap the same way the old cap was inserted and the cap worked fine Read more
Insulation pad that fits behind dishwasher panels to restore thermal protection and reduce noise. Replace if damaged, missing, or rattling occurs.
Fix intermittent power issues or loose connections in your dishwasher. This wire connector restores secure electrical contact between components.
Fix a dishwasher motor that hums or won't start. This run capacitor provides the phase shift needed for smooth motor operation. DIY repair in 30-45 min.
Figured it was either the capacitor and/or motor. Ordered both parts to be sure. tried changing the capacitor first; same problem. Replaced the motor (leaving the new capacitor in place). Unit now works fine. Overall an easy fix once you get the washer out and tip it on its side or top to get access to the motor area. Read more
Secures trim and panels in dishwasher assemblies. Replace if clip is broken, missing, or worn. Prevents loose parts and rattling during operation.
This is a rubber gasket that seals around the door vent opening on a dishwasher, preventing steam and moisture from escaping into areas where they can cause damage. It fits between the vent assembly and the inner door panel. Replace this gasket if you notice moisture or steam leaking from around the vent area, water dripping down the front of the door, or if the gasket appears cracked, warped, or deteriorated.
We had a repair man come and inspect the unit (Independent). He said he would get the part and get back with us. Almost 8 weeks past, with many calls to the service for an update. So I ordered the part he said was bad, the control board. He did not check the fuse. I ordered the fuse, the new board worked. I removed the new and replaced the old control board. Everything is fine. Thus, I am returning the board. The suggestion to replace the fuse came from your on line tech. He saved me... Read more
Secures knobs, trim, or linkages to shafts inside your dishwasher. Replace if broken, cracked, or missing to prevent components from loosening.
Touch-up paint for restoring chips, scratches, and nicks on painted appliance surfaces. Covers minor cosmetic damage on exterior panels and finishes.
Secures the dishwasher vent assembly and directs steam. Replace if cracked, loose, or causing leaks around the door vent. Confirm fit by model number.
First tried replacing the seal around the door as that was the simple and most logical fix. Still leaked. Removed the front and upper panel to inspect. Found calcium deposit running down from under the Air Vent Assembly and wet behind the black stick-on insulation. Easy to trace the leak to the bottom of the door. => Ordered new Air Vent Assembly, gasket and Vent Deflector. Parts arrived. Took 5 minutes to remove upper panel. Removed the two wires from the Air Vent Assembly. Inserted a... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.