Mdg4000bww Ser Parts

Installed new motor, works great. Read more

It's working now Read more

I had cleaned the lint out of the dryer exhaust hose, that was usually the problem. But still no heat. I went online to AppliancePpartPros and watched the videos and was able to diagnose that I needed a new ignitor. .The parts delivered very quickly and I had the job done in 15 minutes. The repair place I called would have taken days to come out just to look at it at.. Read more

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

The kit was very simple it took longer to take the dryer apart than it did to do the change over and it works great thank you for you're product Read more

• Doesn't shut off

Installed this part and it was working good as new in 15 minutes! Read more

Replaced valve had some trouble removing the fitting from the valve as the new fitting was slightly too large and had to be replaced with the fitting from the old valve. Used a large crescent wrench to grip the valve at the base and I was able to apply enough force to remove both fittings transferring old fitting to new valve. The instructions were detailed and excellent. The dryer is up and running fine. Read more

I replaced the gasket that you had sent to me the next day in about 5 minutes! Sears parts direct had the item back ordered and even when I cancelled the order, they still shipped it! I will never use them again! All my appliance part needs will be through Appliance Parts Pros! Read more

When I first looked at my dryer I thought it was my ignitor, on a closer look I found that about an inch of my burner assembly arm was laying in a corroded mess on the bottom pan of my dryer. I came online and found your website. After reviewing your parts I thought well I can probably get those local and with competive pricing. Wrong!! There are 3 appliance parts stores withing about 3 miles and I checked them all. Higher prices by 25-35% and longer wait times than your advertised... Read more

I disassembled my dryer and found that the fan(blower wheel) was "free-spinning" on the motor shaft. A common problem with this model Maytag dryer. I also discovered that the right drum roller (drum support roller) was in the process of failing. Note: the fan drive was frozen on the motor shaft, this was the threaded type of motor and fan assembly. I was able to remove the fan drive by using vice-grip pliers, hammer and a combination wrench to hold motor from turning. Also Note: the fan... Read more

Replaced coils on gas valve; while at it replaced door screws which were starting to wear from assorted repairs over the years. Read more

By putting on the part. Read more

We took the dryer out of the laundry room and took it apart, after reviewing numerous videos at Appliance Parts Pros for direction. Removed front panel, front bulkhead and drum. Then removed exhaust duct, blower assembly and finally motor. (Use large flat blade screw-driver to press very hard down and out on motor mount to remove). After reinstalling all components....motor, new exhaust duct work,front bearings in front bulkhead, and blower assembly, all went back together great. The most... Read more

Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more

Replaced coils on gas valve; while at it replaced door screws which were starting to wear from assorted repairs over the years. Read more