Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dryer won't power on or has loose power cord connection? This terminal block screw kit secures electrical connections. Easy DIY fix in 15 minutes.
And after replacing the thermal fuse The dryer turned on. Read more
Dryer not heating? A faulty heating element is often the cause. This part generates heat to dry clothes. DIY-friendly repair, takes 30-60 minutes.
Put in new part. It was done by maintenance personal and took just a few minutes. Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
Includes screws and wire connectors. For the complete terminal block kit use 279320.
I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great. Read more
Secures the idler pulley to maintain proper drum belt tension in your dryer. Replace if worn, loose, or causing squealing noises. Confirm fit with your model.
Using You Tube How-To Videos. Replaced the drum drive belt and tensioner pulley/arm (including) the spring. Read more
Fix odd rattling noises or no airflow from vents with a new dryer blower wheel. Common issue: lint buildup or wheel separation. Moderate DIY repair.
It was a relatively easy fix - if you know how to take the dryer apart. If you don't, there are plenty of YouTube videos explaining how. Make sure you find your model. Since the wheel had separated from the nut, it wasn't quite as easy and holding the shaft and loosening the wheel. I had to remove (destroy) the wheel first. Then I was left with the nut on the shaft. The nut was seated on the shaft a lot tighter than I expected and took some force to get off. Once it was off, putting the new... Read more
The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt. Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles. Symptoms of a faulty timer knob insert include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
It's working now Read more
Fix a dryer that won't heat or ignites then cuts out. This igniter assembly lights the gas burner for proper drying. DIY repair takes 30-45 minutes.
I had cleaned the lint out of the dryer exhaust hose, that was usually the problem. But still no heat. I went online to AppliancePpartPros and watched the videos and was able to diagnose that I needed a new ignitor. .The parts delivered very quickly and I had the job done in 15 minutes. The repair place I called would have taken days to come out just to look at it at.. Read more
This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.
It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more
Dryer not heating or taking multiple cycles to dry clothes? The heating element generates warmth during the drying cycle. DIY-friendly repair.
Replaced it with a new element. Fairly easy to replace if you have any kind of mechanical know how. Ordered the part for a 2 day delivery and got it the next day. Read more
Suspension spring kit for washers. Supports tub weight and absorbs vibrations. Replace if springs are broken, stretched, worn, or missing. Includes 2 springs.
First remove the back from the washing machine. Top of the machine came off simple. To replace springs, I took a crow bar but it on the right side underneath where one of the springs should be. Lift the tumbler up remove and replace the spring. Did the same thing to the other side. On the tumbling unit there are spaces for three shock absorbers. Mine only had one shock in the middle. I put two new springs, one in the front and one in the rear. Then I replaced the right side spring with two new... Read more
Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.
First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more
Washer won't drain or spin properly? A failing drain pump assembly causes water retention and noisy operation. Moderate DIY repair in 1-2 hours.
Removed old pump and discoverd that two impellers were broken and that bearings were shot orderef new pump which recieved next day and installed workinh fine now Read more
This genuine replacement part is a drive motor for dryers. The drive motor is the main engine that allows the dryer drum to rotate. If the drum is no longer spinning properly, the drive motor might need to be replaced. Luckily this is a relatively simple process.To replace the drive motor, begin by unplugging the dryer. Once it is powered off, uninstall the front panel of the dryer by removing the screws that attach it. After that, lift the top panel above the drum so that it is vertical and no longer covering the drum. Then disconnect the wires from the moisture sensors with a screwdriver by pressing down on the locking tab. Once the wires have been removed, lift the drum out from the dryer to gain access to the drive motor. Using a socket wrench, remove the blower wheel from the motor assembly. Then remove the old drive motor by unthreading the mounting screws that attach it. Install the new drive motor and reassemble the dryer. This OEM replacement part is sold individually and is compatible with Whirlpools, Maytag, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dryers.
Replaced all damaged parts, rear drum rollers, front drum 'bearings', felt seal infront of drum, idler pulley and arm. Lastly replaced motor. Hopefully will work for another 11 years?? Videos were awesome, telephone assistance was great as welll. Thank you. Read more
Dryer not heating or producing warm air? This heating element assembly often solves no-heat issues. DIY-friendly repair, typically 10-20 minutes.
I figured there could only be a couple reasons why the dryer would not heat so I did some research. I read where you could test for continuity on the parts to determine which one was bad. A friend referred me to this site, I looked up the part for my particular model, ordered and replaced the part. It could not have been any easier. I will come back to this site with my future appliance parts needs for sure! Read more
Washer won't start or shows F28 error? Door lock keeps washer secure during cycles. Moderate DIY repair, takes about 15 minutes with door boot removal.
ORDERED IN DOOR LOCK FROM ApplianceParts .received part next day. ( Great delivery time!) went down and installed on my washer at the Laundry.Took about 15min to install. I had very little down time at my business. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.