Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This Freezer Door Handle is an OEM replacement part for Samsung refrigerators. The Freezer Door Handle is a component that allows easy access and secure closure of your freezer door.
Common causes of a bad handle include wear and tear, accidental damage, or loosening of the mounting screws. When the handle is compromised, it may become difficult to open or close the freezer door smoothly, leading to potential temperature fluctuations and decreased energy efficiency.
Some symptoms that indicate a defective Freezer Door Handle:
This genuine Samsung OEM replacement part is also compatible with some Kenmore models.
Using the website, I was able to locate the part and order it Read more
Seals your refrigerator door to keep cold air in and prevent energy waste. Replace if torn, cracked, or loose. Easy DIY install—confirm fit by model.
Took off the old ones, put on the new ones. Read more
The Refrigerator Temperature Sensor Bracket is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures precise temperature monitoring, which is crucial for keeping your food fresh and your appliance running efficiently. Designed specifically for Samsung refrigerators, the sensor bracket provides a secure and stable mounting point for the temperature sensor, enhancing its accuracy and reliability. By replacing a worn or damaged sensor bracket with this high-quality genuine OEM part, you can prevent temperature fluctuations and avoid potential cooling issues. Installation is straightforward, allowing you to restore your refrigerator's functionality quickly and easily. Investing in the Refrigerator Temperature Sensor Bracket means trusting in a durable and compatible solution that supports the longevity and efficiency of your Samsung appliance. Experience the peace of mind that comes with using a part designed to meet the exact specifications of your refrigerator, ensuring consistent performance and a better overall cooling experience.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Ice buildup on evaporator coils blocking airflow? This defrost heater melts frost during cycles. Moderate DIY repair—allow overnight thaw time first.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
The Refrigerator Fan Assembly is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures reliable airflow throughout the appliance, helping to maintain consistent temperatures and keep your food fresh longer. Designed specifically for Samsung refrigerators, the fan assembly guarantees a perfect fit and seamless integration with your existing system. Its durable construction withstands daily use, providing long-lasting functionality and peace of mind. Installing this fan assembly is straightforward, allowing you to quickly restore your refrigeratorGÇÖs efficiency without the need for professional assistance. By replacing a faulty or damaged fan assembly with this genuine OEM part, you can prevent issues such as uneven cooling or excessive noise, ensuring your refrigerator operates smoothly and effectively. Enhance the longevity and performance of your Samsung refrigerator with the Refrigerator Fan Assembly , a customer-focused solution for dependable refrigeration.
I bought new parts, motor and fan. Replace the old one. Took me no more than 15 minutes to fix it. Read more
The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your appliance. Designed to protect the casing around the French doors, it helps prevent wear and tear, keeping your refrigerator looking new for longer. The durable construction of the Refrigerator French Door Cap provides reliable coverage against scratches and impacts, enhancing the overall durability of your fridge. Installing this cap is straightforward, allowing you to quickly restore the original look of your Samsung refrigerator without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the quality and compatibility, ensuring your appliance operates smoothly. Whether you need to replace a cracked, missing, or damaged cap, the Refrigerator French Door Cap is the perfect solution to maintain the aesthetic and functional integrity of your Samsung refrigerator.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Plastic grommet that cushions the hinge pin on refrigerator doors. Replace if cracked, worn, missing, or causing door alignment issues.
I removed the door and the hinge assembly from the right side; it turns out the grommet had never been installed and this is what was causing the door to grind down the metal hinge. It was remarkably easy to replace and my door is working perfectly! Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Houses and secures your water filter for clean drinking water and ice. Replace if cracked, leaking, or causing slow flow. Confirm fit with your model number.
New filters did not fix issue and lines were clear. No need to pull fridge out, Changing this part fixed completely and took about an hour. Mostly because I did not find a good step by step to follow. FIRST: Shut off water, but leave power on for inside fridge lighting. 1. Remove two crisper drawers 2. Squeeze two white tabs just under glass shelf in middle filter housing while pulling off front filter cover (has big hole for filter in middle of it). This requires slotted screwdriver to LIGHTLY... Read more
The Refrigerator Fresh Food Evaporator Cover Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is designed to replace a worn or damaged evaporator cover, ensuring your appliance continues to operate efficiently. Crafted with high-quality materials, the cover assembly provides robust protection for the evaporator, helping to regulate temperature and maintain consistent cooling in the fresh food compartment. Installing the Refrigerator Fresh Food Evaporator Cover Assembly is straightforward, allowing you to restore your refrigeratorGÇÖs functionality without hassle. This part is specifically compatible with a wide range of Samsung refrigerator models, guaranteeing a perfect fit and seamless integration with your appliance. By choosing this genuine OEM part, you ensure reliable performance and longevity, protecting your investment in a Samsung refrigerator. Enhancing the efficiency of your fridge, the Fresh Food Evaporator Cover helps prevent frost buildup and maintains the proper airflow, contributing to a fresher environment for your groceries. Whether you are replacing a cracked, missing, or damaged cover, this assembly is the ideal solution to keep your refrigerator running smoothly and your food fresh.
Replaced the evaporator cover. Read more
The Refrigerator Evaporator Fan Motor is essential for maintaining optimal airflow in your Samsung refrigerator. This genuine OEM part is specifically designed to ensure your appliance operates smoothly and efficiently. By effectively circulating cold air throughout the refrigerator, the evaporator fan motor helps keep your food fresh and evenly chilled. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and saving you money in the long run. Compatible with a wide range of Samsung refrigerator models, this fan motor offers a secure fit and easy installation, allowing you to quickly restore your refrigeratorGÇÖs functionality without hassle. Whether your fan motor has stopped working or is producing unusual noises, the Refrigerator Evaporator Fan Motor provides a reliable solution to keep your appliance running at its best. Trust in this genuine OEM part to enhance the efficiency and longevity of your Samsung refrigerator, ensuring a consistent and pleasant cooling experience for your kitchen.
Replaced refrigerator evaporator compartment fan. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Fix a refrigerator that won't cool or runs warm. This condenser fan motor assembly replaces failed motors causing cooling problems. DIY-friendly repair.
Replaced the condenser fan. Read more
Secures refrigerator door handle to the door panel. Replace if plate is cracked, stripped threads prevent handle attachment, or handle loosens repeatedly.
Replaced cap handle. Repair took less than 5 minutes. Read more