Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
The Refrigerator Fan Assembly is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures reliable airflow throughout the appliance, helping to maintain consistent temperatures and keep your f
I bought new parts, motor and fan. Replace the old one. Took me no more than 15 minutes to fix it. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your a
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Plastic grommet that cushions the hinge pin on refrigerator doors. Replace if cracked, worn, missing, or causing door alignment issues.
After discovering that our leaking fridge was caused by a plastic water storage tank I went on the hunt to find a replacement. Sadly there is no replacement available instead you have to purchase the entire filter tank assembly. Since I only needed the tank I carefully took apart the new unit and removed the tank. The biggest hassle is making sure you go slow so you can remove the front of the housing. Then the right side of covers the tank, pump and lines. The lines are the easiest to... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Houses and secures your water filter for clean drinking water and ice. Replace if cracked, leaking, or causing slow flow. Confirm fit with your model number.
New filters did not fix issue and lines were clear. No need to pull fridge out, Changing this part fixed completely and took about an hour. Mostly because I did not find a good step by step to follow. FIRST: Shut off water, but leave power on for inside fridge lighting. 1. Remove two crisper drawers 2. Squeeze two white tabs just under glass shelf in middle filter housing while pulling off front filter cover (has big hole for filter in middle of it). This requires slotted screwdriver to LIGHTLY... Read more
The Refrigerator Dispenser Lever is designed to restore the functionality of your Samsung refrigerator's water or ice dispenser. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the convenience you expect from your applia
Once I found the hole for the spring arm to go in it took 1 min. Tip: make sure the spring is on the left side pin and, insert it First to insure the spring aligns then use a screw driver to pry out the Right side flange slightly to aide in inserting the right side pin into its hole Read more
The Refrigerator Evaporator Fan Motor is essential for maintaining optimal airflow in your Samsung refrigerator. This genuine OEM part is specifically designed to ensure your appliance operates smoothly and efficiently. By effectively circulating cold ai
Replaced refrigerator evaporator compartment fan. Read more
The Refrigerator Fresh Food Evaporator Cover Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is designed to replace a worn or damaged evaporator cover, ensuring your appliance continues to
Replaced the evaporator cover. Read more
Fix a refrigerator that won't cool or runs warm. This condenser fan motor assembly replaces failed motors causing cooling problems. DIY-friendly repair.
Replaced the condenser fan. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Secures refrigerator door handle to the door panel. Replace if plate is cracked, stripped threads prevent handle attachment, or handle loosens repeatedly.
Replaced cap handle. Repair took less than 5 minutes. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more