Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped working or not making ice? This complete ice maker assembly restores production. DIY install in 20-30 minutes with basic tools.
I replaced the ice maker after replacing the ice try and before that the ice chute gasket. All easy fixes. However, I am still seeing some frost build-up leading me to believe that the issue is just a faulty design, which I have read other posts on. Just too much warm air gets in the ice maker because it is located in the refrigerator, plus warm air probably finds its way from the outside dispenser, up the chute into the ice maker. Oh well, nothing the occasional hair dryer won't take care of,... Read more
Fix ice buildup on evaporator coils or inconsistent cooling with this refrigerator temperature sensor. Easy DIY repair with our video guide.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Ice dispenser jammed or cracked bucket? This ice bucket assembly stores ice and feeds the dispenser. Easy DIY fix in under 10 minutes for most models.
I noticed that the bottom of the plastic bucket was cracked even though it was less than two years old. I called Samsung and they wanted to charge me almost $200. Instead, I found the part at appliance parts pros for half that cost. Since I replaced the ice tray bucket assembly, my ice maker is working perfectly! Read more
If your refrigerator has ice buildup on coils or water under crisper drawers, the defrost thermostat may have failed. DIY-friendly repair part.
Refrigerator not cooling or ice building up? The evaporator fan motor circulates cold air. Common DIY repair when fridge runs warm or makes noise.
Replaced fan motor, temperature sensor and defrost thermostat. Note: I had to replace connector on new defrost thermostat. Connector on new part did not fit mating connector in refrigerator.. spliced in old connector for new one. Read more
Plastic support bracket that secures the freezer handle to the door. Replace if cracked, broken, or missing to properly mount your handle assembly.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
The Refrigerator Auto-Close Lever Assembly is essential for maintaining the seamless operation of your Samsung refrigerator door. This assembly ensures that the refrigerator door closes automatically, enhancing energy efficiency and keeping your food fresh. Crafted as a genuine OEM part, it guarantees a perfect fit and reliable performance for your appliance. Designed specifically for Samsung refrigerators, the Auto-Close Lever Assembly is easy to install, allowing you to restore your refrigeratorGÇÖs functionality without hassle. By replacing a faulty or worn lever, you can prevent unnecessary energy loss and ensure your refrigerator operates smoothly. This genuine OEM part provides durability and precision, meeting the exact specifications of your Samsung refrigerator. Enhance your fridgeGÇÖs performance and enjoy the convenience of an automatically closing door with the Refrigerator Auto-Close Lever Assembly , ensuring your appliance runs efficiently and effectively for years to come.
Repair went great thanks for your service Read more
Plastic support bracket that secures the freezer door handle. Replace if cracked, broken, or handle keeps loosening. Installs on bottom freezer drawer.
Followed your instruction from your youTube instructions Read more
The Refrigerator Flap Door Hinge is a crucial component for ensuring your Samsung refrigerator operates smoothly and efficiently. Designed specifically for Samsung refrigerator models, this genuine OEM part guarantees a perfect fit and reliable performance. The hinge facilitates seamless opening and closing of the flap door, maintaining proper alignment and preventing any unwanted gaps that could affect your applianceGÇÖs cooling efficiency. Made from durable materials, the Refrigerator Flap Door Hinge is built to withstand regular use, ensuring long-lasting functionality. Installing this hinge is straightforward, allowing you to restore your refrigeratorGÇÖs performance without hassle. By choosing this genuine OEM part, you ensure that your refrigerator continues to operate as intended, preserving the freshness of your stored items and enhancing the overall user experience. Whether your existing hinge is worn out or damaged, the Refrigerator Flap Door Hinge provides a dependable solution to keep your Samsung refrigerator in optimal condition.
I loosened middle hinge by the 2 screws which holds a power cord that clips together, then slid the hinge flap upward to release from the door. My bottom clip hinge was broken away from spring and the only way to attach a new hinge clip was to carefully separate the hinge flap. This can be done by squeezing the flap to see where the separation seams are. Small narrow screwdrivers along with a spatula will do without damaging the plastic. This allowed for acess to the spring which connects to a... Read more
The Refrigerator Defrost Heater Metal Sheath is an essential component for maintaining the efficiency of your refrigerator. This genuine OEM part is specifically designed to work seamlessly with Samsung refrigerator models, ensuring a perfect fit and reliable performance. The HEATER METAL SHEATH plays a crucial role in the defrosting process by evenly distributing heat to prevent ice buildup. This helps maintain optimal cooling levels and extends the lifespan of your appliance. Installing the Refrigerator Defrost Heater Metal Sheath can resolve issues related to excessive frost accumulation, leading to better energy efficiency and consistent temperature control. Its durable construction ensures long-lasting functionality, providing you with peace of mind and reducing the need for frequent repairs. Whether you are replacing a faulty heater or upgrading your refrigeratorGÇÖs performance, this genuine OEM part offers a dependable solution to keep your Samsung refrigerator running smoothly. Enhance your refrigerator's performance with the Refrigerator Defrost Heater Metal Sheath and enjoy a more efficient and reliable appliance.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Replaces broken or missing end cap on refrigerator freezer door handle. Snaps into place to complete handle appearance. Commonly cracks or breaks off.
Seals the refrigerator door to keep cold air in and prevent condensation. Replace when cracked, torn, or not sealing properly. Confirm fit by model.
First, I removed the old gaskets, which was a very easy task since they are held in the doors by rubber beads in recessed slots. I installed the new right door gasket in less than 10 minutes by gradually pushing the retainer bead into the door recessed slot with finger pressure until it was seated properly. The left door bead was somewhat more difficult to install into the bead slot, because the recessed bead slot is covered by a hinged flap on its left edge that doesn't permit easy access.... Read more
Ice buildup in freezer or fridge compartment? A faulty defrost thermostat prevents proper defrosting. Moderate DIY repair—test resistance first.
I replaced all three sensors behind the Defroster cover since I was not able to test them. Problem solved. Read more
Replacement fixer handle that secures the appliance handle to the door or console, restoring a solid grip and preventing the handle from loosening or detaching during normal use. What it does
Seals the ice chute assembly in your refrigerator's dispenser door. Replace if cracked, broken, or missing to prevent frost buildup and air leaks.
Replaced chute gasket and ice bin. Has worked great so far. Fingers crossed. Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more