Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
No water or ice from dispenser? Leaking water? This water inlet valve controls water flow to your dispenser and ice maker. DIY-friendly, 10-15 min install.
I have a Samsung fridge and I had a problem were low pressure water kept coming out of the dispenser and would not stop. At first I thought it was the dispenser switch until I read reviews on the App Pro sight and the issue pointed to the water valve. I ordered the part from App Pro (very quick delivery) installed the new water valve in 15 minutes. Turned water back on plugged fridge back in wall and problem solved. Water dispenser working normally. (part DA62-00914B) Read more
The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your a
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Plastic frame and glass cover assembly that sits above crisper drawers. Replace if cracked, broken, or missing to properly support produce bins.
At first, I contacted the number listed in the manual to order the part, the customer service person was no help after 30 minutes of trying to explain what part I needed I think she got it, but then told me it would take 5-10 business days to get it, and they could not ship any faster. So, I cancelled the order and while I was on hold for her I searched the internet and was able to find your website called you had a diagram of the part I needed and it was shipped out the same day and I got it... Read more
Replaces cracked, broken, or scratched pantry drawer cover on your refrigerator. Includes clear plastic viewing window and white frame. Clips into place.
Replaced original parts- Only skill needed was finding plastic push tabs. No tools required. Most of time was used for removing food from refrigerator before looking for tabs. Read more
The Refrigerator Door Mullion is a high-quality component designed to enhance the functionality and appearance of your Samsung refrigerator. This genuine OEM part ensures a precise fit and seamless integration with your appliance, maintaining the structu
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Desig
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
Replacement vegetable drawer rail assembly for bottom-mount refrigerators. Installs in the crisper compartment to support produce drawers. Needed when broken or snapped.
I removed the broken rail saving the 2 Phillips head screws for installation of new drawer rail. Removal of the shelf above the drawers was required and was accomplished by pushing a button on the front of the shelf support. The installation was a snap and took about 10 minutes after removal of food items. The part was the correct one as verified by the model number on the inside of the refrigerator door. Thanks AppliancePartsPros.com! Read more
Replacement door shelf for refrigerator interior storage. Installs on the right door panel. Needed when original shelf is cracked, broken, or missing.
Ordered the parts, they came in very fast, i replaced the broken parts with the new ones. Pretty easy, 5 minutes, my work is done here, opened a cold beer. Read more
The Refrigerator Door Switch is an essential component designed to maintain the optimal performance of your Samsung refrigerator. This genuine OEM part features a reliable switch reed mechanism that accurately detects when the refrigerator door is opened
Replaced the reed switch Read more
The Refrigerator Temperature Sensor Holder is essential for maintaining accurate temperature control in your Samsung refrigerator. This genuine OEM part ensures a secure fit for the temperature sensor, promoting reliable performance and consistent cooling. Designed specifically for Samsung refrigerator models, it integrates seamlessly with your appliance, making installation straightforward and hassle-free. The sturdy construction of the temperature sensor holder guarantees long-lasting durability, protecting your sensor from damage and ensuring it remains in place. By using this genuine OEM part, you can restore the precise temperature regulation of your fridge, preventing issues like improper cooling or temperature fluctuations. This not only helps in keeping your food fresh but also enhances the overall efficiency of your refrigerator. Whether youGÇÖre replacing a worn-out holder or upgrading a damaged component, the Refrigerator Temperature Sensor Holder provides the functionality and reliability you need to keep your Samsung refrigerator operating smoothly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more