Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement spring for the flapper between French refrigerator doors. Installs in the lower hinge to close the gap automatically. Needed when broken or missing.
I thought fixing this door would be too difficult/expensive, so I just spent a week manually closing the flap myself each time I closed the frig. Then I googled the model number of the frig just for fun. The first result was AppliancePartsPros.com, I clicked ONE SINGLE TIME and I arrived at this site, with the exact part I needed listed at the top, and a repair tutorial video that played beautifully with one more click. In the span of two total clicks, I saw how to fix the frig, and I saw... Read more
Spring sleeve for French door refrigerators. Installs in the left door to support the automatic mullion flap mechanism. Replace if cracked or missing.
If your refrigerator has ice buildup on coils or water under crisper drawers, the defrost thermostat may have failed. DIY-friendly repair part.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Ice maker stopped working or making loud popping sounds? This assembly restores ice production. DIY-friendly repair—just unscrew, unplug, and swap.
Since I could not find the correct thermistor from the schematic provided, I ordered the thermistor harness for the evaporator. I cut the harness and spliced it to the sheared thermistor wires on the roof of the freezer compartment. It now works fine with a little "farmer ingenuity" help. Samsung was absolutely no help at all, but the guy that I spoke with over the phone at APP sure was. This site is now my "go to" for appliance parts! Tip for others with this model. Do not overfill the upper... Read more
Hinge for French door refrigerator mullion flap. Replace if cracked, broken, or damaged. Supports smooth door operation and proper seal alignment.
Ice maker not producing or dispensing ice? This ice maker assembly fixes water leaks, small cubes, and frozen clumps. Easy DIY install with one screw.
This appears to be a weak spot on these refrigerators; the left-door ice maker will stop making (or at least consistently making) ice. Instead, an ice dam is created, which builds up in the ice maker corridor, making even getting the slide-in bucket nearly impossible to remove. The ice also freezes up the ice making tray, which therefore cannot drop the ice cubes. Generally, two things may go wrong which lead to this issue. The first is the ice-making assembly; its electrical components... Read more
Replacement door bin assembly for bottom-mount refrigerators. Installs on refrigerator door to hold bottles and containers. Needed when cracked or broken.
Ordered new shelves from Appliance Parts Pros. This website showed a diagrammatic of the parts and frig, so I was confident. Also, APP has competitive prices and $6 shipping for 3 shelves. Arrived in 3 business days even with regular shipping. Read more
Ice overflowing the bin? A broken ice maker shut off arm can't detect full ice levels. Simple DIY fix with one Phillips screw. Video guide included.
I heard a cracking sound so I opened the freezer again and found that it was s piece of plastic -- a small bar -- that had broken off of something. I went online, first to identify the broken part. It was the ice guide. I had to do a bit more research to find out what the ice guide does, as well as the part number. I found it easily on appliancepartspros.com. (I think I purchased a new heating element for my electric oven from you and was able to fix it VERY easily. I was hoping this new repair... Read more
Plastic center hinge for French door refrigerators. Installs on the mullion assembly between left and right doors. Replace when cracked, broken, or snapped.
I ordered the French door housing, the new piece has a solid raised curved part that enters the guide, and a new center hinge. I watched both repair videos shown on appliance parts Pro. It looked pretty simple, so I got my 2 screw drivers and unplugged the refrigerator and started. The hardest part was removing the upper and lower hinges. The video didn’t show how he got them loose, after several minutes of frustration I figured out how to release the hinge. The new parts installed really... Read more
Ice maker stopped working or water line freezing up? This fill tube assembly with built-in heater restores ice production. DIY-friendly repair.
My husband figured that the line to the icemaker was either clogged or had frozen over. We found some posts of people defrosting the icemaker by just leaving the freezer door open or with a hairdryer or space heater, but this seemed to be only a temporary fix so we didn’t do that. Lots of videos out there for Samsung through-the-door top icemaker as, but it was difficult to find any advice for our bottom freezer style (RF261BEAESR). But the parts diagrams on Appliancepartpros are very useful... Read more
Fix freezer ice buildup & fridge not cooling. This temperature sensor regulates cooling cycles. DIY-friendly repair, takes about 45 minutes to install.
Replaced the inside back panel which comes with a new fan. Seems the old fan had stopped working due to ice which burned it out. The drain tube was blocked and ice built up on the bottom plate. Using a basting tube from Walmart and hot water I thawed out the ice in the tube. The basting tube became much like a toilet plunger and cleared the line rapidly. Nothing else worked as fast. I then bought a one foot long piece of thin solid copper wire from Lowes and stripped the insulation off. I... Read more
Ice maker producing broken cubes or leaking? The ice cube tray often cracks over time. Simple DIY repair—remove 2 screws, unplug, and replace. Video guide.
The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more
Replace your cracked or broken refrigerator door shelf bin assembly. This guard-equipped bin installs on the door to hold condiments and beverages securely.
Ice not dispensing or only crushed ice coming out? This ice bucket and auger assembly restores proper ice dispensing. DIY-friendly repair in minutes.
I my wife removed it and replaced. Read more
Ice buildup in freezer or fridge compartment? A faulty defrost thermostat prevents proper defrosting. Moderate DIY repair—test resistance first.
I replaced all three sensors behind the Defroster cover since I was not able to test them. Problem solved. Read more
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more