Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Water Inlet is an OEM part for Bosch dishwashers. This component controls the flow of water into the dishwasher during the wash and rinse cycles. It ensures that the appliance receives the appropriate amount of water necessary for optimal cleaning performance.
Causes of a bad water inlet can include mineral buildup from hard water, wear and tear from regular use, or electrical issues that prevent the valve from opening or closing properly.
Symptoms of a bad water inlet include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
It finally gave E15 code, then after drying out the E15 code came back within 5 minutes of running. I dried out the base then I ran the dishwasher and observed water coming down the overflow chute after running only 5 minutes.There is a water inlet (clear water chamber on the side of the machine). It had some gunk inside that was stopping a black float shut-off from moving. I replaced the water inlet chamber. I also suspected the non return valve (also called a check valve). From the parts... Read more
Dishwasher door won't latch or cycle stops mid-wash? This door lock assembly secures the door during cycles. Typical DIY repair in under 30 minutes.
I contacted Appliance Parts Pros online and got troubleshooting advice. The advice I got was invaluable. I used the information I got from them and then ordered the parts they suggested and sure enough, my start problem was solved. The dishwasher is now working great! I was especially impressed with the friendly and professional ordering process from Stephanie C. that really helped with ordering the parts I needed. Read more
Rinse aid leaking or sticky dishes? This dispenser lid seals the rinse aid compartment. Quick 2-minute snap-in replacement fixes leaks and residue issues.
I bought just the replacement lid based on other reviews. The door cost about a third of the whole soap dispenser module but took a chance it was just the lid. Although the part number is the same there was a new flange on the inside of the lid. Would have been nice if Bosch sent the redesigned part to owners. Either way replacement took 2 minutes and the problem is gone Read more
Dispenser door won't open or stay closed? This dishwasher dispenser releases detergent and rinse aid at the right time. Moderate DIY repair.
Process was a bit more complicated than the videos I had watched online. Had to remove both front panel and control panel to get to soap dispenser. Removed wires to soap dispenser and rinse aide dispenser. Removed wire "harness" around the top and right side of dispenser. Pried back the clips to allow dispenser to be pushed out. It was helpful to have another person to hold the door open at this point. Bent clips back and reinstalled everything. New part works great. Read more
Replaces broken, cracked, or missing dishwasher rack roller wheels. Snaps onto upper or lower dish rack to restore smooth rolling on track rails.
Bought new wheel and the are easy to replace. Found why the brok and did a quick fix so it wont happen again. As the wheels age one will pull off then they all get weak and the rack will come off the track, To prevent this. you can put a plastic tie so the wheels cant fall off in the first place, The disign holds them in place with pressure from the plastic but the plastic ages and gets weak. A tie would have to actually break before the wheel can fall off. Read more
Secures tine rows to your dishwasher rack. Replace if broken, cracked, or missing to keep tines upright for proper dish spacing. Clips onto rack.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
Fix a detergent dispenser that won't open or leaks rinse aid. Replaces the complete dispenser assembly. Moderate DIY repair with video guide.
Replaced dispenser Read more
Decorative trim strip that covers the upper edge of the dishwasher door interior. Replace if cracked, broken, loose, discolored, or missing.
Leaking dishwasher or E15 error code? A worn diverter valve seal allows water to escape during wash cycles. Moderate DIY repair with video guide.
"Watertap" E15 error code indicated leaking. Dried it all out to allow it to run again. Ran dishwasher with front and bottom panels off to get a visual on leak causing the styrofoam float to set off the code. Saw it was coming from the diverter area. Ordered this assembly -- which DOES include the seal ring, by the way -- pulled dishwasher all the way out to replace it, and VOILA. No more leaking or error code. (This took a few days to analyze and receive the part, so in the meantime we... Read more
Secures tines within your dishwasher rack for proper dish organization. Replace if cracked, broken, or clips have failed causing tine rows to fall down.
Dishwasher leaking from the bottom or won't drain? The sump assembly collects and channels water to the pump. Moderate DIY repair with video guide.
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
Guides door cables for smooth opening and closing. Replace if cracked, broken, or worn. Keeps cables aligned and ensures balanced door operation.
Got new replacement spring and cord for our Bosch compact dishwasher. A plastic retaining bracket that held the old spring also was broke but the new spring had its own piece that fit into a slot in the plastic frame, so i just popped it in there, connected the cord, and bingo. The door now works. I tried using the old spring, but it would not work because of the broke bracket. Read more
Replace your dishwasher's right door hinge lever if bent, broken, or causing door misalignment. Installs on the lower right side for proper door support.
It was surprisingly easy to remove the door, remove the hinges, then install the new hinges. On my model, the right hinge has a wiring harness attached, but I just removed from the old hinge and attached it to the new one. You need to be careful about moving the door too far the the cabinet because of attached wires. I needed a torx bit for the screws and a flathead screwdriver for prying the hinges off their pins. Also, a needle-nose pliers helped for pinching the wiring harness clip to... Read more
Supplies water from household plumbing to your dishwasher. Replace if cracked, leaking, damaged by rodents, or stripped threads at connection points.
Replacement left door hinge lever for dishwashers. Installs at the door hinge assembly. Replace if bent, cracked, or damaged from door misalignment.
Originally had a repair done by a local, highly rated, repair service. One year later, door flopped open again. This time I ordered parts from AppliancePartsPro which arrive in two days. Repair was accomplished in one hour, after watching their YouTube video. Parts used by original repair service were not Bosch, were totally inferior. Thank you AppliancePartsPro. Read more
Dishwasher won't drain or shows E24/E25 error? The drain pump removes water after wash cycles. Moderate DIY repair with video guide available.
Water was left in the bottom of the dishwasher after each time we ran it and the dishes were no longer getting clean. Also, there was always soap left in the dispenser. I took the DW completely apart and determined the water was not being forced out of the discharge tube and was merely draining via gravity. I ordered a replacement drain pump and removed the entire motor/pump assembly from under the DW. Once the pump was replaced and the DW was put back together, the water now was forced out... Read more