She55m16uc/54 Parts

The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons. I pulled the stainless panel off the front, then... Read more

Replaced the part with the piece I received from AppliancePartsPro. Snap in part. The thing that made it easy to order was that the picture on the website was clear, compared to the exploded view provided by the manufacturer. While I was at it I ordered extras, and some other basket parts that were inexpensive. Read more

On my Bosch she55m15uc/64, the cycle would take 3-4 hours, with the machine stuck on "1 minute" for a long time. The interior was getting moldy and smelly, and the dishes had a white film. At first, I thought it was the heater relay on the control board, but I pulled that relay and it seemed to be working. I could get an ohmmeter on the heater element without taking the bottom off the dishwasher, and the resistance was infinite. Replacing the heater did the trick. On my unit there was a... Read more

Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to... Read more

Dishwasher made a humming sound but no water was circulating around. Searching around, I decided that it was either the inlet valve or the pump/impeller. I started with the inlet valve since it’s an easier repair. It didn’t work, no problem, now I have a spare. I then changed the pump and motor assembly. When I got the old one out, the impeller was broken along with a crack in the plastic housing. The repair took about 3 hours following along with the video. The dishwasher now works like... Read more

Replaced all of the movable tines with new ones. Purchased all new plastic parts as I thought these would break when I removed them. This did not happen so I now have the plastic clips left over. Read more

After having seen the video I installed the new lid and it worked. Read more

We ordered new top & bottom trays. The dishwasher is 5 years old, so we needed to decide put cost of new trays or replace unit. We are trying to be "green" and not throw away people. So we shopped the internet. We are so glad and happy that we found AppliancePartsPros. The price was good but the service and speed of us getting the parts was exceptional. Can't say enough from the helpful and knowledgeable agent to the speedy shipping. Will use again next time parts are needed. Read more

• overflowing
• Will not fill with water

I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle. Read more

Once the problem had been identified, I ordered a new drain hose from Appliance Part Pros. I received exactly the part I needed, and it was easy to replace the damaged hose with the new one. Read more

This piece fails due to poor design as the weak point of the part you grab to open the dishwasher door. This defect has been reported by a number of owners as a common failure point on this model dishwasher. This is a $90 piece of plastic and yes, it does the job of restoring the DW to fully functional. But due to the inherent design, this part is subject to failing again unless you remember to open the DW a bit gently, and not yank it open You'll need a T20 Torx screw driver and a flathead... Read more

One of the side trim strips was folded over on itself, which made latching the door difficult. It was an easy fix: used a Torx screwdriver to remove 2 screws on each side, and just replaced it on each side. I also ordered the door gasket and the trim strip at top of the door, while I was at it. Glad I replaced the door gasket: it was wearing down and very, very dirty! Very quick repair. Also, the shipping was incredibly fast, ordered it over a weekend and arrived Monday or Tuesday, very... Read more

Replaced worn parts and new rollers dishwasher works like new. The diagram on the parts website helped me order the right parts. Read more

• Not drying dishes properly
• lights flashing or blinking

Ordered new heater/thermostat piece. Read more

Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more

This turned out to be a major effort, requiring me to disconnect the dishwasher, pull it from the cabinetry and partially disassemble the dishwasher to replace the door closer pulley Read more