Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Rack Flip Tine Clip is an OEM part for Bosch dishwashers.Its c-shaped design allows the flip tines to securely grip onto rolled edges of folding tines situated along inner walls of the dishrack. The clip maintains constant contact holding the rack firmly against potential movement.Used for the lower rack to hold one end of two flip tines. The tine clip measures just over an inch.
Causes of clip failure include breakage from repeated folding stresses or flexing over extended use. Material fatigue from long-term exposure to elevated temperatures in the wash chamber can also lead to cracking.
Symptoms of a failed rack flip tine clip include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Easily installed the side mounts and put new trim around the opening. Read more
The Screw Kit (Inner Door) is an OEM part for Bosch dishwashers. It is a comprehensive kit that includes 6 screws required for securing and maintaining the inner door assembly of the dishwasher.
Symptoms of needing a new screw kit:
Causes of a bad screw kit can include missing or stripped screws, corrosion or wear over time, or damage during repair or maintenance work.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to... Read more
The 4 x 16 Screw is an OEM component for Bosch dishwashers.
Common causes of faulty screws include standard wear from years of housing vibrations during wash cycles. Mineral deposits lingering around screw heads also risk eventual corrosion and seizing issues.
Symptoms of potentially loose or damaged screws comprise:
This screw type is additionally suited for Thermador, Gaggenau as well as some premium Kenmore dishwashers.
Ordered replacement parts from AP diagram Read more
The Float Switch is an OEM replacement part specific to Bosch dishwashers. It is a switch located in the sump area of the dishwasher tub that detects water levels and provides feedback for automatic filling and draining functions. Symptoms of a bad float switch include:
Causes of a bad float switch are usually mineral or sediment buildup disrupting its buoyancy and sensing ability. Without a properly functioning float switch, the dishwasher cannot effectively monitor water levels to manage filling and drainage. This OEM Bosch replacement switch is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle. Read more
The Mounting Bracket Set is an OEM replacement part for Bosch dishwashers. Comprised of heavy-duty brackets and mounting fasteners, this set securely anchors the dishwasher to surrounding cabinetry. Causes involve normal stress and fatigue of mounting points from years of use, and cycles of expansion and contraction. Symptoms of faulty or damaged mounting brackets include:
This OEM Bosch replacement set is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
The Bosch dishwasher mounting bracket set includes both left and right-hand brackets used for side or top mounting.
The Side Trim Strip is an OEM replacement part for Bosch dishwashers. It serves as an aesthetic finishing piece that lines both sides of the dishwasher interior tub. Causes of failure include normal wear from daily use, minor impacts during loading/unloading, and breakdown of plastic material over extended years. Symptoms of a worn side trim strip can include:
This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore dishwashers.
One of the side trim strips was folded over on itself, which made latching the door difficult. It was an easy fix: used a Torx screwdriver to remove 2 screws on each side, and just replaced it on each side. I also ordered the door gasket and the trim strip at top of the door, while I was at it. Glad I replaced the door gasket: it was wearing down and very, very dirty! Very quick repair. Also, the shipping was incredibly fast, ordered it over a weekend and arrived Monday or Tuesday, very... Read more
The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. It efficiently transports water from the internal sump to the dishwasher's inlet valve during wash cycles. The flex hose comes with 2 o-rings. Approximate size: 19 5/8 inch. Symptoms of a faulty sump hose include:
Over many uses, mineral deposits can build inside the hose restricting flow. Physical damage like cracks or kinks also inhibits proper drainage. Replace your hose with this genuine Bosch part to restore maximal washing capacity. Compatible with Thermador, Gaggenau, and some Kenmore models utilizing the same hose dimensions, this OEM hose ensures washing needs are consistently met.
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more
The Pump to Sump Gasket is an OEM part for Bosch dishwashers. It serves as a seal between the dishwasher's pump and the sump, preventing water leaks during the washing cycle. This gasket is essential for maintaining the integrity of the dishwasher's internal components, ensuring that water flows where it's supposed to go without causing damage to the machine or your home.
Causes of a malfunctioning Pump to Sump Gasket can stem from normal wear and tear, as repeated exposure to water and detergent can degrade the gasket over time. Improper installation may cause the gasket not to seal properly.
Symptoms of a bad Pump to Sump Gasket include:
Hearing a metal on metal noise and not actually circulate water cancelling cycle worked fine After some web research, I concluded it was highly likely to be the circulation pump, so I watched the video on AppliancePartPros.com and realized it was a lengthy repair (a lot of steps) but not technically difficult. I simply played and paused the video at each step and duplicated the steps. The biggest things to take note of: 1) take good pictures of the wiring to use when you re-connect. 2) Wear... Read more
The Roller and Cable Assembly is an OEM part for Bosch dishwashers. This assembly includes the roller and cable, which work together to facilitate the smooth operation of the dishwasher door, allowing it to open and close effortlessly.
Over time, the roller and cable can wear out or become damaged due to regular use, friction, or accidental mishandling. If either component fails, it can affect the balance and movement of the dishwasher door, making it difficult to operate.
Symptoms of a bad roller and cable assembly include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
This turned out to be a major effort, requiring me to disconnect the dishwasher, pull it from the cabinetry and partially disassemble the dishwasher to replace the door closer pulley Read more
The Toe Panel Screw is an OEM replacement part for Bosch dishwashers. It secures the toe panel to the dishwasher. Causes may involve normal wear and tear over time, improper installation, or damage from excessive force or impact. Replacing with this genuine OEM screw will reinforce your Bosch dishwasher's integrity for reliable performance. Symptoms of a bad toe panel screw can include:
This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.
We just bought an older home, and the Bosch dishwasher was missing the base panel. Found the model number inside the appliance, and found the part online. We needed a white base panel, but weren't sure if it would fit (based on the model #), so we ordered both white and black panels, thinking at least the black one would fit. THEY ARE THE SAME PANEL, ONLY DIFFERENT COLORS. Very happy that the white base panel fit like a glove. Shipping was super fast too. ? Read more
The Dishrack Stop Kit is an OEM replacement part for Bosch dishwashers. This kit comes with both the front and the rear stop, these parts are installed at either end of the rails that the upper rack slides on. These stops help keep the rack on the rail, without this part the upper rack of your dishwasher will not slide in and out of your dishwasher properly. Causes of faulty dishrack stops include wear of sliding surfaces through repetitive racking and unracking over extended use. Exposure to moisture in the wash chamber environment can accelerate degradation. Symptoms of a bad dishrack stop kit include:
I would have had a difficult time fixing this had I not seen your video. It was a VERY SIMPLE repair but I would have been afraid to take pliers and bend the rack. I would have thought I was doing something wrong. Thank you for the time and expense put into making a video for such a simple repair on a product that you surely cannot be making a large profit on. Read more
The Spray Arm is an OEM part for Bosch dishwashers. It is responsible for evenly distributing water across the dish racks during wash cycles using a rotating arm and nozzle design. Causes of a bad spray arm can include mineral or limescale buildup that inhibits water pressure/flow, or damage from accidental impact that impacts its rotation. Over time, normal wear and tear on plastic spray arms can also affect optimal spray coverage. Symptoms of a bad spray arm include:
Dishes were not getting clean, I tried cleaning the original arms but after a number of tries I just wanted clean arms. Changing arms was extremely easy and the dishes are getting amazingly clean! Read more
The Cabinet Side Seals are an OEM part for Bosch dishwashers. These seals are located along the sides of the dishwasher cabinet and play a crucial role in preventing water leaks and maintaining an airtight seal during operation.
Causes of a bad seal can include general wear and tear over time, exposure to high temperatures or moisture, or damage from mishandling or improper installation.
Symptoms of a bad Cabinet Side Seal include:
Ordered stainless door, stainless handle, power and control buttons, black toe panel, and black side strips. Read more
The On/Off Switch is an OEM part for Bosch dishwashers. It provides the function of powering the unit on or off with the press of a button.
Causes can be normal wear over thousands of cycles or moisture damage compromising electronics. Physical impact could also affect switch operation over time.
Symptoms of a bad on/off switch include:
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I... Read more
The Leveling Foot is an OEM part for Bosch dishwashers. It is designed to provide stability by allowing you to adjust the height of the dishwasher, ensuring it is level on uneven flooring.
Causes of a bad leveling foot can include wear and tear over time, damage from excessive force or impact, or thread stripping from frequent adjustments.
Symptoms of a bad leveling foot include:
The parts were to complete the install. Not a repair really. Although this was my first dishwasher install DIY. and thanks to the very fast and accurate parts delivery I was able to get everything done right the first time. Read more
The Dispenser Gasket is an OEM part for Bosch dishwashers. This gasket forms a seal around the detergent dispenser, ensuring that water and detergent are properly contained within the dispenser until they are released during the wash cycle. It helps prevent leaks and ensures efficient operation of the dishwasher’s detergent system.
Causes of a bad dispenser gasket can include regular wear and tear, exposure to high temperatures, and the use of harsh detergents.
Symptoms of a bad dispenser gasket include:
Replaced dispenser. It was hard to snap into place. You don't need to order separate gasket it comes with it. Read more