Wfwf8300sw Parts

I noticed the rubber seal (bellow) was damaged near the bottom of the bellow. It looks like removing clothes from the machine had worn away and eventually ripped away some of the seal. This caused water to leak out the bottom of the door. I looked up the model number of my washer on the web and searched for the part number of the bellow. Once I found it I searched eBay, Amazon and a few other places for the part number and opted for Appliance Parts Pros. The part was reasonably priced and... Read more

The original pump was getting jammed intermittently, more and more often. I cleaned it out, but that didn't help the jamming. So I ordered a new pump. Have your new pump on hand and look at it to see how it attaches. The original pump, a different part number than the replacement, lasted about 7 years of almost everyday use, with multiple loads each day. My washer model Maytag MHW5500FW0 has the pump at the bottom back, in an awkward position. This took me about 2 hours due to the awkward... Read more

I ordered the new hinge and the cap they said would be needed, took the door apart and installed new hinge. Only problem, wish they told me I needed 4 of the caps, for one hinge and each cap was 11.95 x 4...pretty spendy. Fortunately I was able to reuse 3 of my worn ones for now. Read more

With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with Read more

Replaced the bellow. Read more

I contacted AppliancePartsPros and gave them my symptoms and failure codes and they were able to diagnose the problem and send the correct parts to resolve the issue. This is the 3rd or 4th time I've used their service since 2012 and they have been correct on each and every repair issue I've had. Many thanks for the professional advice and help! Read more

I ordered the new hinge and the cap they said would be needed, took the door apart and installed new hinge. Only problem, wish they told me I needed 4 of the caps, for one hinge and each cap was 11.95 x 4...pretty spendy. Fortunately I was able to reuse 3 of my worn ones for now. Read more

The washer would try to start. The door would lock, but then would get stuck in the phase of start-up where the drum needs to roll around (I assume so it knows what's in there). It would sit and think about it for a couple minutes and then give the error codes. I shut it off (sometimes had to unplug it and plug it back in), and it would take about 10 minutes for the door to unlock. After reading about fixes, I decided to dive in and try it (the washer is only 3 years old and I'm pretty... Read more

Replaced all rubber and plastic hoses coming into and exiting the washer discharge pump. They where gummed up with mold and slime. WOW it stopped all odor from discharge into the utility sink. This model required that the whole front of the washing machine be removed which was very intimidating, but after watching the video from Appliance Parts Pros it was easy, I also replaced discharge pump and the bellows since I had it apart anyway and it was 5 years old. Thank you Appliance Parts Pros I... Read more

I purchased the lid latch assembly and the lid switch strike. Following the clear video instructions for each part, my handy teenage son was able to remove the lid latch assembly and replace it with the new part as well as the lid switch strike. The washer is back to working perfectly for under $100. Appliance Parts Pros carry the parts to repair and at a lower cost than other online retailers. I saved about $30 compared to the other online site and I saved a service call fee. I'm so glad I... Read more

We watched a YouTube video on how to replace the door latch. Very simple to do. We had to remove the metal band holding the door gasket to be able to access the latch. After removing the band, we pushed aside the gasket and removed the screws to the latch and the connecting cables. To install the new part, we just reversed the process. We reconnected the cables, inserted the new door latch and screwed it in. The hardest part of the process was getting the metal band around the gasket. It... Read more

Replaced both hot and cold water inlet valves. Works like a charm, issue resolved. Read more

First I check with Appliance Part Pros, watch videos how to access the parts I believe to be the problem. I love there videos and parts list of solutions to fix what it wrong. First I removed the washer from the laundry room and but it in the garage for more room to work on it. The next thing I replaced was the door lock which seem to be a possible cheap fix and does get a lot of abuse, however it was not the door lock and people should stop posting it could be this issue when they get a F06... Read more

Ordered and replaced the bellows. The video was a great help; but as others have mentioned, later models have small differences. Check your model number. I'll second everything said in the review dated Nov 10, 2018; including the part about getting an assistant to hold the outer retention ring in place while you are stretching the spring. Read more

Replaced water inlet valve assembly Read more

Repairing the problem was the easy part. Diagnosing the problem took a little more time. To diagnose the problem, it took longer because I first cleaned the Drain Pump trap from all the material it collected. Socks, hair pins, and other materials that were not cleaned from pants pockets. It then still did not drain. Repeated the process after finding more materials and a toy that punctured the hose between the tub and the drain pump. Running the drain and spin cycle takes about 11... Read more