Hardware Hand Small Engine On-Off Switch Parts
Genuine Lg part
By: Lg
Part Number: 3W40025L
The Dishwasher Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting the door's position, ensuring the dishwasher only operates when the door is securely closed. This switch helps maintain safety and proper functioning during the wash cycle.
Causes of a bad micro switch can include wear and tear from regular use, electrical malfunctions, or physical damage. A compromised micro switch can prevent the dishwasher from starting or stopping correctly.
Symptoms of a bad dishwasher micro switch include:
- The dishwasher not starting or stopping unexpectedly
- Error codes related to door issues
- The door not locking securely during operation
- Unresponsive control panel or buttons
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg dishwasher “ne” or “ue” error code (vario spray arm). Dimitri T. • Cranston , RI • February 26, 2019
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304526190
Burner not heating or stuck on? This surface element switch controls power to individual cooking elements. Moderate DIY repair requires lifting cooktop.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337781
The Water Level Switch is an OEM replacement part for Whirlpool washing machines. It monitors and controls the amount of water that fills the drum during each wash cycle. By ensuring the appropriate water level, it aids in the efficient and effective cleaning of laundry while conserving water.
Symptoms of a bad Water Level Switch include:
- The washing machine overfilling or underfilling with water
- Inconsistent or erratic water levels during cycles
- The machine failed to progress from filling water to the wash cycle
- Error codes or indicators related to water levels or filling
Causes for a malfunctioning Water Level Switch can include electrical issues affecting signal transmission, mechanical failures within the switch, or blockages in the pressure hose connected to the switch.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water level of washing machine was stuck on extra small Stuart D. • Burke , VA • April 13, 2014
I replaced the assembly behind the water level knob.
I watched the video on appliancepartspros.com before starting, and then watched it again in short portions while going thru the repair process.
Read more
More
Genuine Lg part
By: Lg
Part Number: 6600JB3007K
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Lights on refrigerator stayed on. Sue L. • Boise , ID • July 05, 2020
Ordered 2 light switches and replaced them.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293825
If your burner won't turn off or stays on high heat, this surface burner switch restores proper temperature control. Straightforward 30-minute repair.
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DE60-20066A
Secures your microwave to kitchen cabinets during installation. Replace missing, stripped, or damaged bolts for safe and stable mounting.
Do-It-Yourself Stories from Customers like You
Removed 1 year old microwave to paint kitchen internal thread assembly stripped Joel L. • North Richland Hills , TX • December 01, 2016
I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut.
Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761048
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Do-It-Yourself Stories from Customers like You
Burner was stuck on high William M. • Mountaintop , PA • June 23, 2014
Replaced dual element switch.
Fixed the problem.
All is good
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9762215
If your range burner won't respond to settings or produces erratic heat, this surface element infinite switch restores precise temperature control.
Do-It-Yourself Stories from Customers like You
Blew the oven switch! i hate it when that happens! Daniel F. • Miami , FL • July 18, 2015
First and foremost I UNPLUGGED THE OVEN!. I'll pass on the early morning SHOCK THERAPY! Second, I unscrewed aluminum protection plate from back of oven. Next, I unplugged the two connections behind the oven switch. Then I removed the plastic switch from the front and unscrewed the two screws that secured the oven switch to the oven. Once you've completed all these steps you take your new oven switch and do everything again but in reverse order. Hope this was informative, direct, and that your...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782
Dryer won't start but has power and timer works? This belt switch kit stops the dryer when the belt breaks. Moderate DIY repair, 45-60 minutes.
Do-It-Yourself Stories from Customers like You
Broken belt switch Jack F. • Hermosa Beach , CA • July 08, 2016
Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start.
According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch.
I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now.
I am nearly 70 years...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9763762
If your cooktop burner won't heat or won't adjust temperature, the infinite switch likely failed. This part regulates burner power. DIY repair in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Broken cook top switch Joseph M. • Scottsdale , AZ • January 27, 2015
Removed control panel and replaced broken switch. Much easier then expected.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10184148
Washer only fills with hot water or stops mid-cycle? The water temperature switch controls incoming water temps for proper cycle selection. DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would not let cold water into the machine. Jim J. • Prosser , WA • March 12, 2014
I tested the Atc. mid level switch, with my multi tester and found it was not sending enough current to the cold water inlet valve, so it would not open and let cold water in. I replaced the switch, (it was a snap) literally it snapped in place. replace the front face and turned the water back on and plugged in the washer, and turned it on. It worked perfect and has been since. good and easy repair even for a novice like me..
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10350906
Dryer won't start or stops mid-cycle? A faulty door switch prevents operation when the door position isn't detected. Moderate DIY repair, 30-45 minutes.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936800
If your washer won't start or the lid won't unlock, the lid lock switch may have failed. This DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The locking mechanism would not release the lid had to break it to open Dennis H. • Bridgeton , NC • January 10, 2015
1) Ordered part.
2) Removed front panel by loosening the two screws at the bottom front.
3) Removed old Safety Switch/Lid Lock by disconnecting wires (plug and 2 female disconnects)
4) Reconnected all wires and reinstalled switch.
5) Replaced front panel.
6) Tested Unit.
7) FYI - I found that the locking mechanism stays locked until cycle completely finishes on its own. DO NOT force the cycle to end. Lid will NOT unlock.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10167742
If your range burner stays on high and won't adjust temperature, the infinite switch likely failed. This control switch regulates element power levels.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527842
The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.
You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.
Symptoms of a bad Range Switch Rocker include:
- The switch not responding when pressed
- Inconsistent or flickering performance of the heating elements
- Physical damage or looseness in the switch
- Intermittent operation or complete failure to activate the desired function
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rocker switch for to adjust the size of the heating element for the stove broke as well as the rocker switch to adjust the oven light broke Benjamin G. • West Sacramento , CA • January 07, 2017
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10071
The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.
Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.
Symptoms of a bad switch gas valve include:
- Burners not igniting
- Irregular or weak flame
- Gas odor near the stove
- Inconsistent burner performance
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One of my gas range's was not igniting Mark M. • Centennial , CO • June 23, 2014
Bought this switch gas valve for the non-functional burner, and it cleared right up.
Read more
More