Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lid Lock Bezel Parts

Best Seller
Dryer Timer Knob
Genuine Frigidaire part
By: Frigidaire
Part Number: 131873500

Replacement timer knob for dryer control panel. Attaches to timer shaft to select drying cycles. Needed when original knob is cracked or broken.

This part fixes the following symptoms
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You Timing knob was broken just pulled off old knob and pushed on new one   Lillian M. • Lehighton , PA • July 19, 2014

Just pulled off old knob and pushed on new one. Read more

More
$59.35

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339251

Fix a washer that overfills, won't fill to the right level, or floods. This water level pressure switch monitors tub water. DIY install in 1 hour.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Water level control wouldn't work   Micheal W. • Millville , UT • April 11, 2014

I replaced it and the new one fit perfectly. reassembled and fired it up. Worked as desired, like new... Read more

More
$145.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dryer Door Strike
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102

Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.

This part fixes the following symptoms
  • Door won't close
See more...
Do-It-Yourself Stories from Customers like You Frigidaire dryer door would not stay closed   Carolina L. • Miami , FL • September 08, 2015

My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch. I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to... Read more

More
$34.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Pressure Sensor Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436

Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.

Do-It-Yourself Stories from Customers like You Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor.   Wayne K. • Stockbridge , MI • March 21, 2020

Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts. Read more

More
$53.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Knob Rotary (Hotpoint)
Genuine Ge part
By: Ge
Part Number: WE03X25286

The Rotary Knob is an OEM replacement part for GE or Hotpoint washing machines. It provides the interface for selecting wash cycles and adjusting settings like temperature and spin speed.

Causes of a bad rotary knob include cracking, peeling, or damage to labeling from repeated use over time. The internal mechanisms can also wear out, preventing proper rotation.

Symptoms of a bad rotary knob are:

  • Difficulty turning or clicking into set positions
  • Loose, wobbly, or disconnected feel during use
  • Faded or missing labels make settings unclear

It is also compatible with RCA, Westinghouse, Tappan, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The knob on the dryer was cracked off we were using a pliers to turn the metal piece until that broke also   Edward A. • Lakewood , NJ • October 28, 2026

We opened the control panel on the dryer to see which piece we needed as well as the knob. Of course we matched up the model & serial number to make sure it was the correct pieces. Your website made it easier by showing me which pieces were used together. Read more

More
$10.35

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Lid Lock And Switch Assembly
Genuine Samsung part
By: Samsung
Part Number: DC34-00025E

Washer won't start or shows LO/DC error? Lid lock assembly secures the lid during cycles and signals the control board. DIY-friendly repair with video.

This part fixes the following symptoms
  • Door latch failure
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Dc "spin" and lo "lid lock" error codes   Matthew H. • Clarksville , TN • May 19, 2015

After watching the video it was strait forward. Just Pull the screws pop the lid swap the springs "grease them" and put it back together. I would suggest that you have a person help you mostly has a second pair of hands. The lid was over rear springs and it will save you some expletives to have the extra body. I had worn out springs and the load kept becoming unbalanced during spin cycles I just happened to coincide with the Lock mechanism failing. The motor drive for the lock stopped working.... Read more

More
$164.47

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Door Plunger Latch
Genuine Ge part
By: Ge
Part Number: WH01X20823

Fix a washer door that won't stay closed or latch properly with this door plunger. Resolves issues with doors opening mid-cycle or failing to lock securely.

More
$20.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Cooktop Burner Control Knob
Genuine Ge part
By: Ge
Part Number: WB03X24360

Replace your broken or cracked cooktop burner control knob. This knob installs on the control panel and allows you to adjust flame settings.

Do-It-Yourself Stories from Customers like You Ge gas stove top model # zgu385l sm stainless steel one burner would not lite   Edward L. • Fort Myers , FL • November 21, 2015

While trying to fix the problem I broke the knob. Appliance Parts Pros.com had the part delivered in 2 days! After looking at the video I decided there was a poor ground at burner #1. Removal of burner confirmed my suspicion. Years of use “spills” has insulated the burner from a good ground, thus preventing a good spark. Removal of black residue cleared the problem. I am now in the process of cleaning the remaining 4 burners just to be sure. Read more

More
$48.60

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Door Lock Motor And Switch Assembly
Genuine Ge part
By: Ge
Part Number: WH10X10008

Washer won't start or door won't lock? This door lock motor and switch assembly fixes both issues. Moderate DIY repair requires removing screws and gasket.

Do-It-Yourself Stories from Customers like You Wash cycle would not start faint click instead of normal door lock sound   Jeff N. • Charlotte , NC • August 16, 2019

Replaced door lock. It required removing the two screws around the lock, pulling the spring hoop wire from around the door gasket, and then disconnecting the two wire terminals from the lock. Reverse with the new part. After cracking open the old lock the failure was caused by a thin plastic tab breaking off. I also bought the door switch since it's cheap - just in case the problem was not the lock. But the door lock was the fix. Read more

More
$167.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Lock Cam
Genuine Whirlpool part
By: Whirlpool
Part Number: W11315637

Washer won't start or door won't unlock? This lock cam drives the door lock mechanism to secure and release the door for proper cycle operation.

Do-It-Yourself Stories from Customers like You Door switch is broken   Lan T. • Lawrence , MA • August 05, 2014

We have a corn-operation washer machine for my renter home that we took it over when we bough the property, When it broke we have no key. I order key as well as parts, and they come at no time. It is amazing, with the videos my husband was able to fix it, it save me a lot of money Read more

More
$46.35

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Lid Switch Magnet
Genuine Ge part
By: Ge
Part Number: WH12X10276

Washer won't spin or agitate? A faulty lid switch magnet may be the cause. This part signals the switch that the lid is closed. Easy 20-minute DIY fix.

Do-It-Yourself Stories from Customers like You Bad lid switch on a ge washer wouldn't agitate or spin   David C. • Saline , MI • October 26, 2015

Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in. Read more

More
$19.31

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Rotary Temperature Switch
Genuine Ge part
By: Ge
Part Number: WH12X10498

Fix a washer that won't fill with hot or cold water. This rotary temperature switch controls water temperature settings. Easy 5-minute DIY repair.

This part fixes the following symptoms
  • No hot or cold water
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You No hot water would fill the washer in any cycle or temperature setting if the temperature setting was set to "hot" absolutely nothing would happen when turned on (cold washes worked fine)   William H. • St Louis , MO • December 30, 2014

Replaced the water temperature selector switch. After watching a YouTube video for our GE top loading washer showing the switch replacement, I replace the switch in under 5 minutes! Very easy! Read more

More
$18.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Detergent Dispenser
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224430

The Dispenser is an OEM part for Whirlpool dishwashers, integral to the appliance's operation by dispensing detergent and rinse aid during the wash cycle. This component ensures that the right amount of cleaning agent is released at the correct time, contributing significantly to the effectiveness of each wash.

Causes of dispenser failure include cracked internal components from repeated door openings, mineral buildup clogging dispenser parts, or electrical malfunctions preventing dispensing functions. 

Symptoms of a malfunctioning dispenser include:

  • Detergent not being released during the cycle
  • Rinse aid leakage or inconsistent dispensing
  • The dispenser door sticking or failing to open

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door on detergent dispencer would not stay fastened   Douglas F. • Camano Island , WA • January 09, 2018

Initially, I reviewed the comments submitted by previous buyers and then ventured into the "You Tube" Zone. I found the comments submitted by previous buyers both interesting and contradictory. My dishwasher is a ten (10) year old Kitchen Aide (Model# 10224430). The first six or seven reviews stated you need to remove six (6) to ten (10) screws to remove the door and access the detergent rinse dispenser. They are wrong. See the actual number below. CAUTION: Before starting any removal... Read more

More
$140.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Refrigerator Water Filter Bypass Cap
Genuine Ge part
By: Ge
Part Number: WR17X22070

Bypass cap allows refrigerator water and ice dispensers to work without a filter installed. Replace if cracked or leaking. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You 12 y o rental unit ge side by side was missing parts and dispenser was non functional   Scott M. • Asheville , NC • October 04, 2015

First I ordered a new ice door seal, spring, and crank, figuring the condensation in freezer and door was caused by ice door not sealing. Turns out the solenoid for the ice door was completely rusted and was the primary cause, if it had been replaced early, it would have saved the dispenser board. What then happened was the moisture in the freezer door damaged the control board rendering dispenser controls inoperative as well as the heater around the dispenser. Now the freezer door is dripping... Read more

More
$14.49

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Timer Knob
Genuine Frigidaire part
By: Frigidaire
Part Number: 131873304

The Dryer Timer Knob is an OEM part for Frigidaire dryers. It is responsible for allowing users to set the drying time and cycle selection by turning the timer shaft. The knob securely attaches to the timer and provides an easy way to control dryer settings.

Over time, the timer knob can become damaged due to repeated use, excessive force when turning, or wear on the internal connection points. If the knob becomes stripped, cracked, or no longer stays in place, it may need to be replaced.

Symptoms of a bad timer knob include:

  • The knob spins freely without adjusting the timer
  • Cracks or breaks in the knob
  • Difficulty selecting or changing dryer settings
  • The knob does not stay attached to the timer

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The dryer knob cracked and no longer turned the dryer on   Patty G. • Lexington , SC • November 02, 2015

The old knob was not repairable. I ordered a new knob for the washer dryer stack unit. The order came within two days of ordering and it was the correct part. I was pleased. Read more

More
$53.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dishwasher Rinse Aid Dispenser Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 154388801

This is the cap that seals the rinse aid reservoir on the dishwasher door. It keeps rinse aid contained so it dispenses properly during the rinse cycle. Replace this cap if it is cracked, missing, or no longer seals tightly, which can cause rinse aid to leak out prematurely and result in spotty or poorly dried dishes.

Do-It-Yourself Stories from Customers like You The dishwasher left by tenant with the cover panel loose on the left the door hyperextending a bit when opened.   Marlena R. • Star City , IN • July 07, 2021

Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched.... Read more

More
$37.62

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google