Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
This replacement moisture sensor bar mounts inside the drum and helps the dryer detect when laundry is dry. A worn or damaged bar can cause sensor-dry cycles to end too soon or run too long.
The Thermal Fuse is an OEM part for GE dryers. This part prevents the dryer from overheating by cutting off the power if the dryer exceeds a certain temperature.
Causes of a bad thermal fuse can include regular wear and tear, lint build-up, restricted airflow, or a malfunctioning thermostat.
Symptoms of a bad thermal fuse include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Very easy to replace the fuse. Unplug the unit. Take off the back and swap it out. Only two wires. Read more
If your dryer takes too long to dry or overheats, the cycling thermostat may have failed. This part regulates heat by cycling on and off. Easy DIY fix.
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed. Read more
This moisture sensor monitors dampness inside the dryer drum and signals the control when fabrics are dry, helping automatic cycles end on time and avoid overdrying. Replacing a failed sensor can restore consistent Auto Dry performance and cycle times. What it does:
Fixed it in 5minutes. One end has a Phillips head screw and the other has a tab with to metal leads for wires. The end with the tab broke. I removed the screw for the other end abd the sensor bar came off. To put the new piece on, I connected the wires to the leads, slid the tab end into place on the drum and screwed in the other end. Done! Easy! Read more
Fix frost buildup and warm fresh food section with this clip-on defrost thermostat. Restores automatic defrost cycles. Moderate DIY repair.
I bought a thermostat and defrost timer. Read more
Washer not heating water or showing tE error? This temperature sensor monitors water temp and signals the control board. Moderate DIY repair fixes temp issues.
Ordered a new thermistor and replaced the one that the wires had pulled out of. Note- we secured the wires on the new thermistor with electrical tape before installing. Read more
This sensor monitors operating conditions and relays accurate feedback to the control so cycles run properly. Replacing a failed sensor helps restore correct operation and prevent erratic behavior or fault codes. What it does:
This dishwasher turbidity sensor measures how dirty the wash water is and reports to the control. Replacing a faulty sensor can restore proper cycle times and cleaning performance for consistent results.
I replaced the sensor and the seals around the door. Read more
This sensor monitors water flow inside the dishwasher to ensure proper water circulation during wash and rinse cycles. It sends signals to the control board to regulate water intake and pump operation. Replace this sensor if the dishwasher displays error codes related to water flow, fails to fill properly, or stops mid-cycle due to incorrect flow detection.
I replaced the float assembly. The float assembly was clogged with a soft sludgy material. It works perfectly now Read more
Freezer cold but fridge warm? Excessive frost buildup? Your defrost thermostat may have failed. This sensor controls the defrost cycle timing. Easy DIY fix.
Fixes long dry times and temperature issues. This dryer thermostat regulates heat cycling to prevent overheating or underheating. Simple repair.
Fixes ice buildup in freezer and reduced cooling. This bi-metal defrost thermostat monitors evaporator temperature. DIY-friendly repair, about 20 minutes.
I replaced the Defrost Thermostat. Read more
Ice maker not producing ice or overflowing? Failed thermistor prevents proper temperature monitoring. Direct plug-in replacement restores ice production.
There are plenty of DIY youtube videos to show you how to replace the parts. I went ahead and replaced more than just the broken parts. I figured if I had the machine opened up, I might as well replace parts that could go out in the future. I might have gone a bit too far with all the other parts. The only part that was really broken was the wiring harness. Two of the wires had corroded from the sockets and there was no other way than to replace the entire harness. Its a bit tricky to feed... Read more
Dryer won't heat or start? A failed thermostat breaks the heating circuit. Common DIY fix—test for continuity with a multimeter. Typical repair time: 30-60 minutes.
Changed Thermistor, Thermostats and the Thermal Fuse Assembly. I did not remove drum, so squeezing my hands in-between drum and vent hose pipe to remove screws was a tight fit, but doable. Read more
Dryer won't start or overheats? A faulty high-limit thermostat breaks the heating circuit to prevent damage. Easy 5-10 minute DIY replacement fix.
Replaced the themal fuse Read more
Fix ice buildup in freezer and warm fridge temps. This defrost thermostat monitors evaporator temperature to control defrost cycles. DIY-friendly repair.
After watching numerous videos I was able to discern that the problem was with one of the following: the timer, the heater, or the thermostat. a short time check showed me that the timer was working so that narrowed it down to the other two. Not having the necessary tools to check those two I ordered both parts. Once the parts came and I took out the old parts it was quite evident that it was the heater since it had black burn marks on it. I decided to install the thermostat also since it... Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.