Need Help?
Call
Fix a refrigerator not cooling with this evaporator fan motor. Circulates cold air throughout fridge and freezer for uniform cooling and temperature control.
New cond fan & new evap fan & new defrost heater unit Read more
Fix a dishwasher that won't spray water with a new circulation pump rotor. Couples with stator to drive wash impeller. DIY repair takes about 2 hours.
The PC board was bigger than the original so had to modify the mounts, the pump and rotor are pretty straight forward but would have much easier with another pair of hands. It took about 2 hours start to finish. One and a half days to get the parts, fantastic service. A new dishwasher is $1300.00. the parts were $314.00, so more than worth fixing. Read more
Fix a dishwasher that won't drain or leaves standing water. This drain pump assembly evacuates wastewater to complete cycles. Moderate DIY repair.
Replaced the pump and drain hose. The pump was easy. The replacement parts were identical to the bad parts. The drain hose was full of gook and smelled awful so I decided to replace that as well. The tag on the new hose alerted me to the procedure for installing a drain hose. If your dishwasher is not vented you need to create a high hose loop so that excess particles from the garbage disposal or dishwasher don't stay in the hose. The person that installed the dishwasher failed to do this which... Read more
The Sump Overmold Service Kit is an OEM part for GE dishwashers. It includes the sump and filter assembly that collects food debris and drains water at the bottom of the dishwasher. This over-molded, tightly-sealed design removes soils and prevents leaks.
Causes of failure can be cracks, chips, or splits to the sump overmold due to excessive mineral buildup, high heat, or other wear over time. Foreign objects entering the sump area may also damage the filter mesh.
Symptoms of a faulty sump over mold assembly include:
This genuine GE part is compatible also with Hotpoint, RCA, and select Kenmore brands.
Fixes dishwasher that fills but won't spray or clean dishes properly. Restores water circulation through spray arms. Average 3-hour DIY repair.
I paid $90 for a repairman fee to tell me I needed a motor. I submitted the same problem to you and you gave me the same advice for FREE. I ordered the unit from you . It came in promptly, It took me about 3 hours to replace and saved about a $300-$400.repair estimate. Thanks. Read more
The Evaporator Fan Motor is an OEM part for LG refrigerators. It is located in the freezer compartment, near the evaporator coil. It works to circulate cold air throughout the refrigerator, ensuring efficient cooling and proper temperature distribution.
Causes of a faulty evaporator fan motor can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as insufficient cooling, improper temperature regulation, or unusual noises coming from the refrigerator.
Symptoms of a bad evaporator fan motor may include:
This OEM LG part can also be used on Kenmore/Sears appliances.
Removed the freezer drawers, ice maker, and panel that the fan motor is attached to. Changed out the fan motor reinstalled everything and plugged it in, and presto. I had ordered the control board just in case but didn't need it. The fan motor wasn't the easier part to replace but it was the cheaper of the two. Because the old motor would run for just a short time I assumed that it wasn't sending a signal back to the control board telling it that it was running. I was right!! Read more
Fix a washer that hums but won't agitate or spin with a new drive motor. Common when motor is weak, seized, or trips the breaker. 90-minute DIY repair.
My Kenmore washer had three problems and thanks to AppliancePartsPros.com videos I was able to repair all three. The washer coupler was defective so I replaced it. This topok about 30 minutes. The washer lid switch was defective. This took about an hour. Finally, the motor was defective. I was able to disconnect the motor from the transmission and test the motor by leaving the wiring connected and run a wash cycle. The motor was dead. I replaced it with a new motor and now the washer runs... Read more
Washer won't agitate or spin? A failed drive motor prevents wash and spin cycles. DIY replacement restores proper operation in 1-2 hours.
Started out as a replacement of the coupling between the motor and the basket transmission ( 2 of the 3 legs on the transmission side broken.. )... Bought a new pump, since I would have it off... or so I thought.. Metal output shaft into pump + years of moisture = pump rusted on. Put it all back together - runs fine... for a while.. Then the old pump bearings burn out. Back apart.. Cut the old pump off the motor. Reinstall everything... Nothing, Just sits there and buzzes... Now... Read more
Freezer not cooling evenly or running warm? This evaporator fan motor circulates air across coils for consistent temperatures. Simple plug-in install.
Replaced evaporator fan motor. Read more
Refrigerator not cooling evenly or freezer too warm? A failed DC motor stops air circulation. This motor ensures proper airflow for consistent temps.
Watch youtube video to see how to replace fan motor. Ordered part from AppliancePartsPros.com and replaced it. Perfect match! Read more
Dishes not cleaning evenly or spray arms not working? The diverter disc routes water to spray zones. Common issue, straightforward 5-10 minute fix.
Replace the leaking seal. Part fitment was original and easy to replace. Read more
The Carbon brush, drum motor is an OEM part for Bosch washing machines. These carbon brushes are responsible for transferring electrical current from the commutator on the motor to power the rotary movement inside the washing machine drum. Two come per package.
Symptoms of a bad carbon brush, or drum motor can include:
Causes of a bad part include normal wear and tear over extended use. As the brushes continuously contact the commutator, friction can cause them to wear down over time.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
This is the second time this issue has come about. Bosch would tell you that you have a brushless motor. This is not true. If you get on youtube.com you can see how you can replace the brushes in your motor. Brush replacement. $50. New motor using a appliance repair man $500. Read more
Dishwasher leaking or not washing dishes? The circulation pump motor controls water flow. Most DIYers complete this repair in 30-60 minutes.
Could not have went better. The girl in customer service verified all my parts prior to my ordering. I paid for next day shipping and they arrived on time. Exact replacement items for our Frigidaire dishwasher. Will give all of my future business to Appliance Parts Pros. One precaution...when manually entering my model number on the website, incorrect part numbers were displayed. Make sure you have their online chat representatives verify your parts and you will be good to go. Read more
Turntable stopped rotating or making grinding noise? Replace the turntable motor to restore smooth tray rotation. DIY repair in under 15 minutes.
I replaced the motor by removing 5 screws from the bottom of the microwave and 1 screws from the motor. Very easy to replace, I didn't even have to remove it from the wall (I unplugged it just in case). Read more
Fixes weak spray and poor cleaning caused by a worn impeller. Mounts on the circulation pump to drive water through spray arms. DIY-friendly repair.
Motor shaft was stripped, replaced with new shaft from Motor Seal Kit. Impeller was also cracked, so replaced it as well. I did run in to a small problem, the chopper blade was pressing against the metal grate on the piece that goes back over the motor seal. I spent about an hour messing with it, but thought maybe once it's all together it'll be fine. When you screw the impeller on, it pushes down the seals, which pushes down the chopper blade. Video on Motor Seal Kit page made it an... Read more
If your freezer is warm or you hear howling fan noise, the evaporator fan motor may need replacement. Moderate DIY repair taking 2-3 hours to restore cooling.
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.