Coil Parts

Inspected the Defrost timer and it seamed to be functioning properly. Ohm ed out the defrost heater element and it also measured out correctly (mine 34 ohms). Bypassed the heater element and found that the unit would run without tripping breaker during defrost cycle. At this point i inspected the wiring to the heater and checked continuity of the wire and continuity to ground, No issues found. So with the heater out of the circuit and not having an issue i ordered heater element from... Read more

Easy. Pulled the two screws that hold the top in place. Then lift the top and slide it forward 4 inches. Reach in and disconnect the two wiring harnesses (Squeeze the sides to release). Lift the entire top off and place it upside down on the table. Remove the four screws that hold the metal panel to the top. Flip this panel upside down. From under the panel and release the three clips that hold the element in place. ***YOU NEED TO SAVE THESE CLIPS**** they do not come with the new... Read more

I ordered new burner. New terminal block and new switch. Unplug appliance. Removed switch panel. Had 6 star screws and two Philips head screws. Removed switch and remember to keep all screws because you need to reuse them. Also suggest taking a picture of wiring so you remember were to plug them back in on switch. All in all. It's a very easy fix. You can save yourself literally a hundred or more dollars. By doing it yourself. As you remove old parts keep in mind how you did it and then... Read more

Replaced. Read more

• Little to no heat when baking

I purchased a new element from Appliance Parts Pros online and received it a short time later. I was able to determine the correct size and element as a result of the picture and graph background. Very Helpful!!! The stove is over thirty years old and so it took some time for my friend to get the old screws out. Otherwise, installation was straightforward. Read more

• Little to no heat when baking

I got on the internet and found you Monday and waited. The new part was delivered Tuesday afternoon and installed in five minutes. Crisis averted! Wednesday saw three kinds of Christmas cookies made and Christmas day we had twelve family members for a big feast. None of this would have worked without your quick service. Thank you. Read more

Open oven door removed 2 screws to lift up top then remove 1 screw at back of burner assy to let right side burner assy drop down to replace then remove wires be sure to write down where wires go look on bottom side for location of wire plugs new burner plugs may be located in different location mine was then install new burner assy Read more

Bought replacement burner receptacles. Cut off the old ones, used wire nuts to connect replacements. Read more

Very easy fix. Remove oven door by just opening it slightly and pulling up. (an easy way to clean it too). Then, with a phillips screw driver, remove two screws holding the damaged element in place. Slowly pull the element toward the front a couple inched to expose the wires. Disconnect the wires (no tools needed), remove the old element and replace it with the new. Reverse the past few steps and re-attach the wires and screw. Simple as that. I also chose to replace the Broiler Element as a... Read more

I broke two of the elements in my GE Profile cooktop because I failed miserably at removing the glass top. It pays to do your research, kiddies. All it takes is a Number 10 Torx bit to remove 12 screws holding the glass to the body of the appliance, and it lifts straight up. I was replacing the glass because it broke during my home's construction. Anyway, you need a 1/4" nut driver to remove the mounting tabs on the bottom of the old element and transfer them to the new one. The whole swap out... Read more

Appliance Parts Pro' 1" gridded photos of elements helped insure I got the right bake and broil elements for my stove. Super fast shipping was promised in two days and came in one day. The tough part of the repair was getting the rusted sheet metal screws off to remove the old elements. The tough part of the purchase was that no one had an index of parts by the old GE model numbers. For the first time in years both ovens of our GE 1971 40" double stove work. Read more

• Little to no heat when baking

Wire on one side became disconnected. Had to pull the oven out and reconnect it. Read more

Looked at YouTube on how to replace burner. Marked wires on each fitting with different color marker and took Ipad photo of underside while my wife held range top up. We had shut off range double breaker in basement. I took part to a local appliance parts house nd they ordered prt which they did not have in stock. Estimate 3days. I called on 3rd day, back ordered, maybe ship,on the 7th day. Called 7th day, maybe two more weeks. Got online, on Fri. Afternoon, you had part, shipped it that... Read more

It's one of the easiest jobs in the world. It take longer to unwrap the parts than to install them. Looks great...works great. Easy, Done. Read more

Replaced with new Lg part as per advice from parts/tech (Applianceparts pros) after ordered & received, removed/installed it, it works great now. Thanks a lots, guys, great works! Read more