Procom Heater Parts

Replaced the defrost heater Read more

Turned off the oven at the breaker panel and then ordered the part from AppliancePartsPros.com and received it by FedEx next day. Great price, great delivery. The installation was a snap and it is back in operation now. Thanks ApplicancePartsPro.com! Read more

The cooling coils were iced-up. The ice was blocking air flow to the refrigerator. This resulted in the freezer working fine while the refrigerator was warm. Called AppliancePartsPros and talked to Sally. Sally was a big help in troubleshooting the problem. I ordered and replaced the cooling coil heater. If you attempt to do this repair yourself, BE CAREFUL, the cooling coil fins are sharp. Read more

• Little to no heat when baking

The delivery of the element was superfast, less than 24 hrs. Unplug the Stove from the receptical! Took a phippips screwdriver and took out the 2 screws holding it, and tilted it upwards a bit and pulled the element out about 3 inches an unhooked the wires. Hooked the wires up to the new element and pushed it back into the holes and put the 2 screws back in and turned the stove on and that was all there was to that. Read more

• Oven not heating evenly
• temperature not accurate

Removed 4 screws from back panel and removed back panel. Removed 3 screws and 3 wires from heater element and removed element. Reversed procedure with new element and seal. You will need the seal! Old one crumbled apart. All took less than 10 minutes. Read more

I took the model number of the oven and typed that in followed by replacement backing element.there was a photo of the element that matched the original. They provided an online tutorial as to how to install it. It was very easy because the electrical contacts at the ends of the new baking element slid right into the electrical contacts inside the oven cavity. The only thing that you had to be careful about was loosing the electrical contacts deep inside the oven. But I didn't see it as much of... Read more

I purchased the replacement element. The element was a direct replacement. The entire replacement took 20 minutes, 15 minutes of which was to clean the range before putting it back. Read more

First, watched a how to you tube video. Then, proceeded to repair my stove. Read more

Watched your video and followed the instructions. It was a quick and easy fix. Thanks Appliance Pros and the delivery took less than 48 hours, that was standard shipping. I will order from them again when I need parts ! Thanks Read more

• Frost buildup

A real oddesy with a Samsung Refrigerator. Samsung customer servicen is a joke, but thanks to Appliance Parts Pros, I have been able to fix the various problems I have had. It is three years old, but began having serious problems about a year ago. The display was out, and the food temp in the refrigerator side varied from 30 degrees in the crispers to 56 degrees on the top shelf. None of the independent repairman I found had the diagnostic tools for Samsung, and the nearest authorized... Read more

I surfed the Web on " How to repair glass top stove burner that wouldn't heat". I found out how and what to check for a problem with the element.I found what I needed to know and how to trouble shoot.This was easier to repair than I thought it would be. Read more

With a screwdriver and some mechanical aptitude. Nothing harder that a few screws to change the parts. Read more

It's was easy to replace. Unplugged the oven from the wall, unscrew the two screws that hold the element to the back of the oven and pulled it away from the oven. Then just pull off the two wires at the end of the bake element. Install the new one in the revers order, easy. Read more

I replaced a burner and it worked fine. Read more

I broke two of the elements in my GE Profile cooktop because I failed miserably at removing the glass top. It pays to do your research, kiddies. All it takes is a Number 10 Torx bit to remove 12 screws holding the glass to the body of the appliance, and it lifts straight up. I was replacing the glass because it broke during my home's construction. Anyway, you need a 1/4" nut driver to remove the mounting tabs on the bottom of the old element and transfer them to the new one. The whole swap out... Read more

Inspected the Defrost timer and it seamed to be functioning properly. Ohm ed out the defrost heater element and it also measured out correctly (mine 34 ohms). Bypassed the heater element and found that the unit would run without tripping breaker during defrost cycle. At this point i inspected the wiring to the heater and checked continuity of the wire and continuity to ground, No issues found. So with the heater out of the circuit and not having an issue i ordered heater element from... Read more