By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
Need Help?
Call
Oven display blank or buttons not responding? This clock control board powers your display and controls bake/broil functions. 15-minute DIY install.
I started searching for the model number online and GE did not have any info but I found appliancepartspro.com, they had the control board which I was looking for, so I called them before I bought it, they confirmed the part and put the order in. I had the part the next day and installed that night, it worked perfect and is continuing to work. With the warrantee of 365 day I can't go wrong. Thanks Read more
Fix unresponsive buttons or frozen LEDs on your dishwasher. This tactile control assembly restores keypad function. DIY-friendly repair takes 15-45 minutes.
I ordered a control tactile asm kit which gave me the new board for the controls. All I had to do was use a screwdriver to take out the old board and connect in the new board. I'd never done anything much like this before but it truly only took me a few minutes! Read more
This is a 60 Hz timer that controls the duration of drying cycles in a clothes dryer. It advances through each stage of the cycle and signals the motor and heating components to turn on or off at the appropriate times. Replace this timer if the dryer will not start, the cycle does not advance, the timer knob spins freely without clicking, or if the dryer runs continuously without shutting off.
I replaced the timer with a new one. Read more
Washer won't advance cycles or stops mid-cycle? This timer sequences fill, wash, drain, and spin stages. Moderate DIY repair restores cycle control.
Watched instructional viedeos on how to replace timer. Read more
Fixes refrigerators that won't cool or have excessive frost buildup. This defrost timer cycles frost removal every 6-12 hours. DIY-friendly repair.
This unit has a recurring problem with the defrost timer. after the first 10 years the original part gave up. we had it replaced and (as normal for me i watched very closely) . after 2 years the same trouble started again. the defrost cycle would run to long. so i replaced the same part and solved the trouble again. so now about every 2 years this part wears out again and i order it and replace it. this has gone on for 20 years now and this unit is still going strong after serving us for 29... Read more
This control board is the appliance's primary printed circuit board. It governs cycle timing, options, and power to key components. Replacing a failed PCB can restore responsive controls and consistent operation across all cycles.
After doing online research about this particular error code I found www.appliancepartspros.com. On the site I searched my washing machine's model number and I found the correct part (in my case, it was the main control board) at a discounted price. I figured that with their no hassle return policy it was a no brainer trying to replace the part myself. The process went fairly smooth. If you're replacing this part yourself, be sure to disconnect your machine from the power outlet first to avoid... Read more
Range won't turn off or functions stay powered on? This relay board controls electrical flow to range components. Common fix for stuck-on appliances.
Won't start, spin light blinking, or won't stop spinning? This control board manages cycles and settings. Common DIY repair, typically installed in minutes.
Remove the 2 screws that hold on the front cover just above the washer, the control board is in front of you. Remove the 2 small screws that secure the board, they are star screws, very small ones, do not drop them, for they will fall into the washer tub. Take a picture of the wiring harness, press the 2 tabs on each side of the board, left and right side, the board will pop out. replace the wiring harness, wiring harness has tabs that hold them in place. Also, check the magnetic lid switch,... Read more
Fix a washer that won't advance cycles, stops mid-cycle, or hums but won't spin. This mechanical timer controls wash sequences. DIY-friendly repair.
Appliance Parts Pros I've used in the past and will continue to use, now they have a video showing step by step how to change the part your going to purchase, video also explains what the part does and symptoms of bad existing parts like mine. Washer machine was dripping water into tank when not in use, it was the water inlet valve. I purchased on a Sunday and it arrived with our mailman on Wednesday. I watched the repair video one more time and changed it out. When you unhook hoses to remove... Read more
Dishwasher won't start, stops mid-cycle, or shows error codes? The control board manages all cycles and functions. Moderate DIY repair in 30-60 minutes.
A bit of searching on the internet narrowed the problem down to either the heating element or the control board. As I am not much of a diagnostician I decided to replace both. Along this same line, I would never have attempted these repairs if it hadn't been for the clear, easy to understand repair videos provided for each part. Further, my decision to do my own repairs was made easier because the prices of the parts was so reasonable. I took my time, reviewed the videos and replaced the... Read more
Washer won't start, stops mid-cycle, or displays error codes? The main control board manages all cycle functions. Moderate DIY repair, 30-45 minutes.
I had a beeping problem with my washer whereby it kept on beeping when I turned it on. After researching the issue online I saw that the control panel was the issue so I ordered a new one and installed it and voila!!! Problem solved!! It was an easy fix and the only hard part was lifting the dryer from the washer so as to replace the part. Read more
Fix an oven that won't heat or respond to controls with this electronic control board. Restores accurate temperature regulation and normal operation.
I replaced the digital oven controller. Read more
Fix F11, F14, or E15 error codes and unresponsive controls. This electronic control board restores oven temperature regulation and display functions.
My induction slide-in range was getting an E15 error code. First thing to do is look in the service manual, which should be in a plastic pocket at the back of the oven. I eventually did do that, but first I googled it. First, power cycle the stove, i.e. turn off the breaker, wait a minute, then turn it back on. That fixed it for a few months, but then it started doing it again, except now it only took a minute for the oven to beep E15 after turning the breaker back on. The service manual... Read more
Dishwasher won't start or responds erratically? The electronic control board manages all functions. Moderate DIY repair restores normal operation.
After googling the symptoms I determined that the control board was the problem. The original control board had been discontinued, but there was a current equivalent board. AppliancePartsPros.com had the best price online so I placed the order. It was shipped the next business day and was delivered the day after! The part included the plastic case for the board so all I needed to do was unplug and unscrew the old part and plug and new one in. The dishwasher is now running good as new. ... Read more
Washer fills but won't agitate or advance cycles? The timer controls wash, rinse, and spin sequences. DIY repair typically takes 15-30 minutes.
I live overseas and these parts were not available locally. I have a repair person who takes care of all my appliances. He installed the new parts in about 15 minutes and my washer is working fine now. Read more
This is an electromechanical defrost timer that controls the automatic defrost cycle in a refrigerator. It periodically switches the compressor off and activates the defrost heater to melt frost buildup on the evaporator coils. Replace this timer if your refrigerator is not defrosting properly, frost is building up excessively on the back wall of the freezer, or the compressor runs continuously without cycling into defrost mode.
I replaced the Thermostat and Defrost Timer. It was a fairly easy repair other than removing the old Defrost Timer. The way the manufacturer, in this case, Amana, mounts that unit with "clips" is just poor design and engineering. It is virtually impossible to get the timer out without damaging the mounts. I had to do some creative rework to mount the new timer. After 2 days, the fridge appears to be working properly with these new parts. The new parts were shipped Very Fast...APP is... Read more
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.