Slow Clamp Line Mover Regular Spring Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8316845
Stabilizes your washer on uneven floors. Replace if spring is broken, stretched, or missing. Connects leveling links to keep machine level and balanced.
Do-It-Yourself Stories from Customers like You
Excessive vibration during spin cycle Jackie H. • Dunbar , WV • September 10, 2018
This was the second attempt at fixing this problem. The first repair and parts were generated by listing the problem and reviewing the potential corrections, listed on the web site. From making repairs on other clothes washers, I was confident that some of those potential causes could have been the cause. Unfortunately the counterbalance spring and suspension springs were not the cause as they were attached as intended and in good condition.
I reached out for Appliance Parts Pros input...
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Samsung part
By: Samsung
Part Number: DC61-01215B
Maintains tension on the idler pulley to keep the drum belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10247710
This kit includes suspension rods and dampers that support the wash tub inside a top-load washing machine, absorbing vibration and movement during the spin cycle. The rods connect the outer tub to the cabinet frame to keep the tub centered and stable. Replace this kit if your washer shakes excessively, makes loud banging noises during spin, or if the tub appears to hang unevenly.
Do-It-Yourself Stories from Customers like You
I had a unbalance issues and then lid lock issues no codes Linn P. • Dixon , IL • October 14, 2014
I read through the issues related to my problems. I purchased both parts so if one was fixed then the other still needed to be fixed I would have the part. I watched both videos for replacing the parts which made things so much easier. I will say prying in the front clips was the biggest issue out of the whole repair. I repaired the suspension issue by replacing the 4 rods. The very last rod that I replaced was indeed bent. I closed the top and ran one load and then the lid lock issues...
Read more
More
$124.61
- Compare At:
-
$147.04
- You Save:
-
$22.43
Genuine Ge part
By: Ge
Part Number: WH16X513
The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.
Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.
Symptoms of a bad drain hose clip include:
- Water leaking from the back of the washer
- Drain hose detaching or becoming loose during operation
- Difficulty securing the drain hose in place
- Visible damage or cracking on the clip
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Note: For the entire drain hose, use part number WH41X10096.
Do-It-Yourself Stories from Customers like You
Discharge hose for 15 year old hot point washer Edith P. • Shelton , CT • October 06, 2014
The fix was so easy 2 screws and done, the part i ordered came the following day, i didnt expect it to arrive for another 3 to 4 days, excellent service , shipping, recieved the correct parts, and they have everything in stock, i would recommend Appliance Parts Pros to everyone, you wont be let down, believe me, thank you for the fast service, i give them 10 stars,
Read more
More
$11.47
- Compare At:
-
$13.65
- You Save:
-
$2.18
Genuine Whirlpool part
By: Whirlpool
Part Number: W10440786
Set of four suspension rods and springs that support the washer tub. Replace if rods are bent, broken, or loose at mounting points for proper tub support.
Do-It-Yourself Stories from Customers like You
Out of balance Paul M. • Worcester , NY • March 27, 2020
Replace the suspension rods.
Read more
More
$77.76
- Compare At:
-
$91.76
- You Save:
-
$14.00
Genuine Frigidaire part
By: Frigidaire
Part Number: 154579101
Replaces broken or stretched dishwasher door springs. Restores proper tension so door opens and closes smoothly without dropping or loud noise.
Do-It-Yourself Stories from Customers like You
Frigidaire Gallery dishwasher door dropped to floor. Mark K. • Aurora , OH • December 23, 2021
Found the end of the right-side Door Spring that connects to the Door Cable broke off and the plastic end of the Door Cable that connects to the Door Spring was also broken off.
Ordered a replacement Door Spring 154579101 and Door Cable 154578801 from AppliancePartsPros.com When the parts arrived a few days later, I watched the video on the AppliancePartsPros.
Following the instructions on the video, it took about 15 minutes to replace the Door Spring and Door Cable. Note: I did not have...
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Whirlpool part
By: Whirlpool
Part Number: 285790
The Clutch Band and Lining Kit is an OEM part for Whirlpool washing machines. It contains the clutch band and clutch lining components essential for proper transmission of power from the washer motor to its drum during the spin cycle. The clutch band and lining allow for a controlled amount of slippage to safely extract water from clothes without damage.
Symptoms of a bad clutch band and lining include:
- Excessive noise or vibration during spin
- Slow or ineffective spinning
- The drum failing to spin or “locking up”
- Premature wear of other transmission parts
Over time and with heavy use, these components can wear down. If slipping or damage is detected, it’s important to replace the kit to avoid potential transmission repairs.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Spins slowly
-
Will not agitate
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Squealing during spin cycle and very weak agitation Elijah S. • Stockton , CA • May 24, 2015
My parents have the older 80 series washer and dryer that gets used way more than a consumer washer and dryer was ever meant to be used. The washing machine finally said im tired. During the spin cycle it was making a really loud squealing noise and during the agitation cycle it would barely agitate the clothes. So i ordered the basket drive to get rid of the squealing during spin cycle and noticed the dogs on the cams were warn and werent grabbing so ordered the whole cam kit to be safe...
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Lg part
By: Lg
Part Number: 4970FR2084Z
Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.
Do-It-Yourself Stories from Customers like You
The drum on the spin cycle made very loud noises and it sounded like a broken suspension spring Tom Z. • Mahwah , NJ • July 23, 2015
I removed the top cover and found the left main suspension spring broken. Appliance Part Pros had the new springs (2 I replaced both) at my door in 26 hours. Excellent service from this company.
After disassembling the drum from the chassis of the machine, it was very easy to replace the springs.
i do wish however that I had purchased a higher quality machine. LG refused to do anything to help and the machine is only 3 years old and gets minimal use.
Hats off however to Appliance Parts Pros....
Read more
More
$47.21
- Compare At:
-
$56.18
- You Save:
-
$8.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8270020
Replacement door balance spring for dishwashers. Provides tension so the door opens smoothly and stays in position. Needed when spring is rusted, broken, or stretched causing door to slam open or fall without resistance.
Do-It-Yourself Stories from Customers like You
Door handle on 2002 model maytag dishwasher broken Thomas H. • Fort Worth , TX • October 17, 2014
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them.
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002773
Kit of six suspension springs that support and stabilize the washer tub. Replace when springs lose tension, causing tub to tilt or sag improperly.
Do-It-Yourself Stories from Customers like You
Out of balance on spin cycle Brian B. • Magnolia , TX • November 24, 2014
Replaced Snubber Ring installed spring kit. Watched installation video, found it very helpful to plan repair. The washer runs like new now.
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780051
Suspension rod kit connects the outer tub to the washer base for support and stability. Replace when rods are worn, broken, or causing excessive movement.
Do-It-Yourself Stories from Customers like You
Tub was banging against the side of the washer Chris Z. • Lewisburg , TN • August 11, 2014
Rebalanced the load but noticed the drum was sitting lower and the springs were wore out and it went out of balance easy, so i got the suspension rod kit and installed it and it works much better. It took me 2 hours because i didnt have adequate room to move around. Hour job if you have room.
Read more
More
$107.38
- Compare At:
-
$127.78
- You Save:
-
$20.40
Genuine Lg part
By: Lg
Part Number: 4970ED4004G
Hinge spring for dishwasher doors. Attaches to door hinge mechanism to provide proper tension for smooth opening and closing. Replace if worn, stretched, or broken causing door to slam or not stay open.
Do-It-Yourself Stories from Customers like You
LG dishwasher door crashing open (very heavy) Kristi B. • Oregon City , OR • December 05, 2020
We knew at least one door hinge cable assembly or hinge spring was broken (the door started falling down rapidly and became heavy to close) so we ordered two of each since we had read to go ahead and replace the damaged items on both sides. While we were waiting on the order, the other side must have broken-the door became incredibly heavy and instead of falling open, started crashing down unless it was carefully lowered. We feared it would fall on one of our animals and kill them. We did not...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Ge part
By: Ge
Part Number: WB2X9719
This metal bracket provides structural support for range components like burner assemblies or control panels. It securely holds parts in their proper position during normal cooking operations. Replace when range components become loose, sag, or don't align properly.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$13.40
- Compare At:
-
$14.74
- You Save:
-
$1.34
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304406520
Secure door gaskets and interior trim on freezers and refrigerators. Replace broken or missing clips to maintain proper seal and temperature. Confirm fit.
Do-It-Yourself Stories from Customers like You
The seal around the door was not sealing Ron W. • Bakersfield , CA • September 22, 2014
Ordered a new seal, and replaced it with a new one freezer works great now.
Read more
More
$89.73
- Compare At:
-
$105.88
- You Save:
-
$16.15
Genuine Whirlpool part
By: Whirlpool
Part Number: 285901
The Counterbalance Spring Kit is an OEM part for Whirlpool washing machines. This kit includes springs that help balance and stabilize the washer drum during the spin cycle, preventing excessive movement and vibration. The counterbalance spring kit includes 3 counterbalance springs. The counterbalance spring kit includes 3 counterbalance springs.
Over time, counterbalance springs can wear out, lose tension, or become damaged due to repeated use and the strain of heavy loads. A faulty counterbalance spring can lead to instability and increased noise during operation, affecting the washer's performance.
Symptoms of a bad counterbalance spring kit include:
- Excessive shaking or vibrating during the spin cycle
- Loud banging or thumping noises
- The washing machine moving or "walking" during operation
- Unevenly distributed loads or off-balance errors
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My whirlpool washer was chasing me around the room it was so out of balance and shaking James S. • Oak Point , TX • March 21, 2016
My wife and I along with Mat on the video replaced the upper and lower friction pads, along with the balance springs. The machine runs smooth as it did new. Thank you everyone at Appliance Parts Pro and Mat. You are a great company. P.S. my wife and I should had made our own video for you since we are both in our 60s I bet it would have been funny Thanks Again. JIm & Debbie from Texas.
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135004
Suspension spring kit for front-load washers. Supports the tub assembly to maintain balance during cycles. Replace if springs are broken, stretched, or missing.
Do-It-Yourself Stories from Customers like You
Whirpool duet 10 years old drum would make a rocous during spin cycle Jose F. • Pflugerville , TX • December 06, 2014
Ordered the springs and shocks. Noticed that the washer had placement for 4 springs, but the factory only installs 2 (or they forgot to install the other two on my machine).
If you replace the springs, be sure to check for the spring bracket mount. You will also need those.
The washer is running fine. Next I'll work on the dryer.
Read more
More
$49.51
- Compare At:
-
$59.41
- You Save:
-
$9.90