Bath Fan Light Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3-60336-001
This electric fan motor is mounted near the evaporator coils inside the freezer compartment and circulates cold air throughout the freezer and refrigerator sections. It ensures even cooling by pushing air over the evaporator coils and distributing it to all compartments. Replace this motor if the freezer is warm, the refrigerator section is not cooling properly, or you hear unusual buzzing or humming noises coming from the back of the freezer.
Do-It-Yourself Stories from Customers like You
When freezer would start the evaporator fan it would make noise Richard L. • Rutherfordton , NC • August 18, 2015
The fan blade had vibrated down the shaft of motor and was hitting the fan supports. I replaced motor and new fan blade. The motor was still operating but since I had everything opened up I changed out the motor anyway. Freezer working fine now. The only unforeseen problem is there was a black wire that had to be transferred to the three prong wiring harness.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285518
Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.
Do-It-Yourself Stories from Customers like You
Only hot water no matter what setting Jane D. • Newport , RI • June 23, 2025
Ordered the right part, took the back off the top control panel, and popped it in.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415587
This switch monitors water levels in the washing machine tub and signals when the correct amount has been reached. Located near the control panel or top of the washer, connected to a pressure tube. Replace when the washer overfills, underfills, or won't start filling with water.
Do-It-Yourself Stories from Customers like You
Whirlpool washer has a f35 code (analog pressure sensor) Paul M. • Carlisle , PA • June 13, 2014
I was searching the web for solutions and came across two folks who had similar trouble code. One fixed his by removing the pump strainer from the pump to find coins blocking water flow, thus the analog water pressure sensor provided a failure response. My issue was solved by following the other hints I got. I ordered a new sensor (switch). It was expensive for what it is, but the washer will not run correctly without it! The part arrived in a very timely manner, and it was the right part....
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10633627
Refrigerator not cooling but freezer works? A failed evaporator fan motor stops cold air circulation. Moderate difficulty repair requires panel removal.
Do-It-Yourself Stories from Customers like You
Freezer was cold but refrigerator was warm Susandelong D. • Durham , ME • October 14, 2016
The evaporator fan had stopped working and caused the entire area around it to ice up. No air flow was getting from the freezer to the fridge. I replaced the damper control (it was rusted, not sure if it was workign or not) and the evaporator fan. It was a very quick repair once I diagnosed the problem. The most time consuming part was taking all the compartments apart to get to the affected area.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185286
Burner stuck on high or won't heat? This infinite switch controls electric cooktop burner temperature. Moderate DIY repair restores heat control.
Do-It-Yourself Stories from Customers like You
Right front burner was out Jimmie L. • Pelion , SC • August 29, 2016
So I ordered the burner and Ithe switch because I wasn't sure what part was defective. I pulled the oven out and I removed the 6 1/4 inch screws on each side of the glass top as well as the 2 Phillips head screws on the back, removing the 2 1/4 screws on the shield on the back gIves you easier access to them, then lifted the glass top up on the front to access the switch and burners. Make sure you turn the power off before beginning this process. When lifted up the wires connected to the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DG67-00018A
This is the fan blade that mounts onto the convection fan motor inside your oven and circulates hot air evenly throughout the oven cavity during convection cooking. Even heat circulation helps food cook more consistently and in less time. Replace it when your oven is not heating evenly, you hear an unusual noise during convection mode, or you can see the blade is cracked or damaged.
Do-It-Yourself Stories from Customers like You
Oven not heating correctly taking too long to heat Ken S. • Dothan , AL • February 09, 2016
Changed out the Fan. Oven turns all heaters on to quickly get to temperature - the sensor probe is next to the broil heater - it quickly senses the broil element heat and claims a false oven temperature and "reaches" set temperature at the sensor probe. Changing the fan causes the air to circulate during this time - so the entire oven heats up. The Fan is supposed run in Bake mode during heat up. The Fan blade nut is a left hand thread - turn CCW to tighten and Clockwise to loosen - RIGHTY...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01X10239
This halogen light bulb restores bright, reliable illumination inside your appliance, making it easier to check food and read controls. Replace a burned-out or broken lamp to bring back safe, convenient visibility while cooking.
- Provides bright lighting for the appliance cavity or work area
- Direct replacement for a failed, flickering, or shattered bulb
- Helps you monitor cooking progress without opening the door
- Typical symptoms: light won't turn on, intermittent flicker, blackened or broken glass
What's included: 1 halogen bulb Install notes:
- Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
- Allow the light area and lens to cool completely
- Handle halogen bulbs with a clean cloth or gloves; avoid touching the glass
- Install per your appliance's instructions and ensure the bulb is fully seated and any cover is secured
Do-It-Yourself Stories from Customers like You
Refrig: no water busted water tank Michael S. • Boca Raton , FL • June 08, 2015
Had to remove all three food drawers and the back panel behind the drawers (4 screws). The water tank comes with the associated tubing which would typically require access to the back of the fridge to run the new lines.
Instead I clipped the existing lines inside the fridge. Then I clipped the lines off the new tank so they would line up with the old lines.
I then used a 5/16" OD compression coupling (Lowes or Home Depot) to connect the ends of the tubing together. The joined tubes are...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR60X41627
Fix loud fan noise and poor cooling with a new evaporator fan blade. Restores airflow across coils. Moderately difficult install in tight freezer space.
More
Genuine Bosch part
By: Bosch
Part Number: 00424410
Fix a dishwasher that won't power on or reset with this on/off switch. Replaces worn or moisture-damaged switches. DIY-friendly installation.
Do-It-Yourself Stories from Customers like You
The switch stopped working Kirk B. • Pelham , AL • March 24, 2014
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304526190
Burner not heating or stuck on? This surface element switch controls power to individual cooking elements. Moderate DIY repair requires lifting cooktop.
More
Genuine Ge part
By: Ge
Part Number: WB25T10002
Replace your cracked or missing oven light lens to restore safe illumination. This cover protects the bulb and diffuses light for clear visibility while cooking. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Bulb fall off after 10 years. Mesut A. • Bethesda , MD • October 29, 2020
1. Cut the power/unplug
2. Loose 2 screws and take out the lamp holder.
3. There are 2 cables connected to the holder. Unclip them (Don't worry, they're in a different size. You can not attach them to wrong connectors)
4. Clip the cables to the holder (One is slightly smaller and fits a slightly smaller connector)
5. Push back the holder to original place and screw (You'll use existing screws. No replacement in the box)
6. Turn on the power/plug-in
7. Let there be light!
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10479
Fix a washer that won't fill properly or overfills with this water level pressure switch. Common when load size selector fails. 20-minute repair.
Do-It-Yourself Stories from Customers like You
Water level pressure switch failed Larry P. • Colorado Springs , CO • November 13, 2015
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188242
Ice dispenser not working or making noise? This motor powers the auger that delivers ice. Moderate DIY repair with video guide. Fits many models.
Do-It-Yourself Stories from Customers like You
Ice dispenser would not dispense ice Robert Y. • Honolulu , HI • March 13, 2014
The auger would not turn the dispenser because the screw threads were stripped. I could not re-thread it so I had to replace the entire motor assembly.
The video your company provided was extremely helpful not only for fixing the problem but to give me the confidence to do it myself. It was a very detailed video that included all the safety instructions.
Read more
More