Power Small Engine Ignition Coil Parts
Genuine Ge part
By: Ge
Part Number: WB44M5
Broiler not heating or browning food? A faulty broil element is often the cause. Located at the top of the oven, this part restores even heat for broiling.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Broiler element burnt out in my kenmore wall oven James O. • Moulton , TX • July 26, 2014
Cut off power ,inside I remove the two back screws, remove the two front screws with hangers. Pull element out, clip wires so they don't fall back in holes with clothes pins. worked good. But wire connection to the broiler was to large, had to replace connectors, wire fell in hole, had to pull wall oven out and remove back panel. I then mounted the new element to oven. Replaced connectors ,connected connectors, closed back panel, put oven in place ,connected power lines. Turned power on. Works...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44X10015
Broiler won't heat or stays cold? This range broil element restores high-heat broiling. DIY-friendly repair, typically takes 20 minutes to replace.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Broiler heating element went out Mark H. • Water Valley , MS • March 16, 2015
I ordered a broiler element, watched the video and replaced the element when it arrived. I turned off the electrical breaker to the stove/oven. I then removed the oven door from the hinges and removed the 1/4" square head screws that secured the element in place,( the video showed phillip head screws ), removed the element wires from the old element. Replaced the element wires to the new element and reattached the element to the oven with the hex head screws. I then put the oven door back on...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4X444
Fix a dryer that won't heat or ignite with this igniter. Common first failure on gas dryers. Most DIYers complete this repair in 15-30 minutes.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Igniter was in pieces Gertrude P. • Chicago , IL • June 26, 2015
Removed back panel of dryer. Pulled out part out of its clamp. Placed new igniter in clamp, then dried some clothes and it worked.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001556
This igniter is used in gas dryers to ignite the burner flame that heats the air inside the drum. It includes an attached wire harness for easy electrical connection. Replace this igniter if your gas dryer runs but does not produce heat, or if the burner fails to light consistently.
Do-It-Yourself Stories from Customers like You
Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting Timothy E. • Bellvue , CO • September 15, 2019
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404154
Dryer not heating or shuts off after a few minutes? A faulty thermostat often causes temperature regulation failure. Easy DIY fix with a multimeter test.
Do-It-Yourself Stories from Customers like You
Whirlpool Thin Twin mod LTE5243DZ2 dryer ran but was not creating heat David G. • York Springs , PA • July 17, 2019
I checked the continuity on the thermal fuse (which was blown) and knew that it needed to be replaced. This made me question why it blew (i.e. what caused it to fail). I checked continuity on the thermostat (high limit) as well as the thermostat for the element. Both passed a continuity test, so I removed the high limit thermostat to inspect it and could hear it rattling inside. This leads me to believe the spring inside had failed, so I replaced this thermostat as well. Put it back...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: MAL9000AXX
The LP Gas Conversion Kit is an OEM part for Whirlpool appliances. This kit allows for the conversion of natural gas appliances to use liquid propane (LP) gas. It includes all necessary components, such as orifices and instructions, to ensure a safe and efficient conversion.
Over time or due to specific needs, you might need to convert your appliance from natural gas to LP gas. Causes for needing this conversion include moving to an area where only LP gas is available or preferring LP gas due to its efficiency and environmental benefits.
Symptoms indicating the need for a gas conversion kit include:
- Moving to a location that only supplies LP gas
- Changing energy preferences for better efficiency
- Appliances set up for natural gas needing adaptation to LP gas
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
I changed my dryer from ng to lp Dave F. • Kimbolton , OH • June 06, 2015
The kit was very simple it took longer to take the dryer apart than it did to do the change over and it works great thank you for you're product
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10140847
Fix frost buildup in your freezer with this defrost heater. Melts ice from the evaporator coil during defrost cycles to restore normal cooling.
Do-It-Yourself Stories from Customers like You
Freezer icing up and not defrosting Robert N. • Deerfield , WI • February 12, 2017
Replaced Defrost timer, Heater element and Bimetal-Def. Since the Refrigerator was older and the parts are not that costly I just replaced them all since I was in there.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44T10105
Oven not heating or preheating slowly? This bake element restores bottom heat for even baking and consistent temperatures. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Oven temperature was not reaching desired setting Brian U. • Greeley , CO • January 25, 2016
Replaced broiler element.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61006116
Fix ice buildup on evaporator coils with this defrost heater and thermostat assembly. Restores automatic defrosting in 30 minutes. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Ice build up in the back of the freezer Eugene O. • Mira Loma , CA • August 17, 2015
Order part at appliancepartspros.com *( Heater and Thermal Assy. ) and with that I watch a video on how to repair my fridge. It took me about 15 minutes to replace the parts. I think it took me longer than that to watch the video itself because I want to make sure that I will do it right. Replacing a part is very easy, now after two weeks my refrigerator is running good so far !!!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M160
Hi-limit thermostat. L210.
Do-It-Yourself Stories from Customers like You
Low heat Larry S. • Parrish , FL • January 21, 2016
Ordered a new safety thermostat. Installed it in 10 minutes and good as new.
Thanks for your great trouble shooting and fast parts the repair was a breeze.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307250
Dryer runs but won't cycle off or cycles too frequently? A faulty cycling thermostat may be the cause. This common repair takes 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Auto dry wouldn't shut off on maytag dryer Donald G. • Auburn , NY • September 11, 2017
Replaced timer and cycling thermostat. cycling thermostat was the problem. For some reason it wasn't getting the message to the timer needed to cycle the dial.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387137
This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.
- Controls the cycling temperature of the heating circuit to prevent underheating or overheating
- Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
- A faulty thermostat may cause overheating that can trip the thermal fuse
- Located on the blower housing on many models
What's included: 1 internal-bias thermostat Install notes:
- Disconnect power and shut off gas (for gas dryers) before servicing
- Access the blower housing; note wire positions and transfer one at a time
- Mount the thermostat flush to the housing for proper sensing
- After installation, run a test cycle to verify proper heating
Do-It-Yourself Stories from Customers like You
Thermal fuse blew John P. • Palm Coast , FL • January 02, 2016
Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00219072
The Bake Element is an OEM part for Bosch ranges and ovens. It is responsible for generating heat through its calibrated heating coils to bake and roast foods evenly. Consistent heat production is essential for optimal cooking performance.
Causes of a bad bake element can include coil failure due to deterioration over time and heat exposure, cracks or damage to insulators, or interrupted electrical flow.
Symptoms of a failed bake element include:
- Incomplete or uneven baking
- Extended cook times even at higher temperatures
- Failure to reach or maintain desired bake temperature settings
- Cool spots or cold spots appearing inside oven cavity
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Burned out element Elizabeth L. • Dansville , NY • November 25, 2019
We bought both bottom elements for each oven. They installed and now work PERFECTLY! Thank you!
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA47-00295A
Fix frozen water tanks and no water from door dispenser. This heater prevents ice buildup in storage tanks. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
Frozen water tank that cracked Roman O. • Rocklin , CA • October 27, 2015
Ordered tank and heater, installed, so far so good. Thanks for the speedy order Roman
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11101459
Burner only partially heating or not working? This surface heating element restores even cooking. DIY-friendly repair with photos of wire connections.
Do-It-Yourself Stories from Customers like You
Only one part of the three part main stove burner was working Robert H. • Bonney Lake , WA • January 17, 2015
I ordered a replacement burner from AppliancePartsPros.com and replaced it using a u-tube video to find out how to do it. I took pictures of the wiring before I took it apart and then removed the burner element from the glass tom, but I left all the wires attached. I screwed the new element to the glass top and then one by one I unhooked each wire from the broken element and then hooked them each back onto the corresponding place on the new element. I used the digital pictures I took of the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000041
This bake element supplies the primary heat from the bottom of the oven during the Bake cycle. Replace it to restore proper preheating and even results when the original is burned out, damaged, or no longer heating. What it does:
- Provides radiant heat for baking and preheating from the lower oven position
- Helps the oven reach and maintain the set temperature for consistent cooking
- Common symptoms: no heat in Bake, very slow preheating, uneven baking, or a visible blister/crack in the element
- Restores normal oven operation when the existing element has failed
What's included:
Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Remove oven racks; take out the element's mounting screws and gently pull the element forward
- Support and disconnect the two wire terminals; prevent wires from slipping back into the insulation
- Attach wires to the new element, secure with existing hardware, restore power, and test
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Baking element went out Vincent B. • Yukon , OK • February 28, 2016
It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad.
Read more
More