Icemaker Thermistor Parts
Genuine Speed Queen part
By: Speed Queen
Part Number: D513737
This replacement moisture sensor bar mounts inside the drum and helps the dryer detect when laundry is dry. A worn or damaged bar can cause sensor-dry cycles to end too soon or run too long.
- Senses moisture on fabrics and signals the control to advance or extend auto-dry cycles
- Helps stop the cycle when clothes reach the selected dryness level
- Symptoms can include auto-dry cycles ending early, extended run times, or inconsistent dryness
- Build-up on the bars can also affect sensing performance
What's included: 1 moisture sensor bar Install notes:
- Disconnect power before servicing; shut off gas supply for gas dryers
- Access the sensor at the front bulkhead/lint housing; move wire leads to the new bar and secure with existing hardware
- Clean any residue from both sensor bars to improve accuracy
- Reassemble and test with a small damp load on a sensor cycle
More
Genuine Ge part
By: Ge
Part Number: WE4X857
The Thermal Fuse is an OEM part for GE dryers. This part prevents the dryer from overheating by cutting off the power if the dryer exceeds a certain temperature.
Causes of a bad thermal fuse can include regular wear and tear, lint build-up, restricted airflow, or a malfunctioning thermostat.
Symptoms of a bad thermal fuse include:
- The dryer not starting
- The dryer shutting off unexpectedly during a cycle
- No heat production during drying
- The dryer running but not heating
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
No heat Mitchell T. • Issaquah , WA • September 29, 2014
Very easy to replace the fuse. Unplug the unit. Take off the back and swap it out. Only two wires.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304469403
Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.
Do-It-Yourself Stories from Customers like You
The gear was stripped not turning to make ice Maryjane T. • Seguin , TX • May 11, 2020
Replaced the gear. Now it's making ice again. Perfect.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304522722
The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This assembly stores batches of fresh ice for retrieval.
Causes of a bad ice container can include cracks or damage allowing water to leak or ice to melt prematurely. Hinges or latches may weaken over time. Mineral deposits may clog drains and hamper ice ejection.
Symptoms of a bad ice container assembly include:
- Ice crushing or cracking inside the container
- Inability to fully rotate or lift the container out
- Water puddling inside versus stored as intended
- Ice frozen together into a solid block
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigidaire ice bucket from older unit slipped and fell breaking it beyond repair Thomas N. • Fairfield , CA • April 27, 2026
I was nervous about being able to order an exact replacement but took a chance with Appliance Parts Pros. They researched my model Frigidaire and sent the exact replacement very fast. A little more expensive than I hoped but took care of the problem fast.
Read more
More
Genuine Ge part
Please note: You may also need to order an adapter. For the adapter to convert the male connector from rectangular to oval use part number WR29X10049. Water valve in kit is part# WR57X10033.
Do-It-Yourself Stories from Customers like You
Icemaker stopped working David K. • Haymarket , VA • July 11, 2016
GE bottom freezer icemaker stopped working for the 2nd time. Refrigerator bought in 2008, replaced (first time) icemaker in 2009 by GE tech for $450, after 7 years 2nd ice maker failed I decided to attempt replacing the icemaker myself. Purchased a replacement icemaker that comes as a kit. I replaced the water valve and the icemaker unit with in 30 minutes and I had ice the next day. Easy peasy for less than $140. Thank you ApplianceParts Pros
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304474
If your dryer takes too long to dry or overheats, the cycling thermostat may have failed. This part regulates heat by cycling on and off. Easy DIY fix.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786110
This moisture sensor monitors dampness inside the dryer drum and signals the control when fabrics are dry, helping automatic cycles end on time and avoid overdrying. Replacing a failed sensor can restore consistent Auto Dry performance and cycle times. What it does:
- Detects moisture level via conductivity across the sensor surfaces inside the drum
- Sends feedback to the control so Auto Dry cycles advance and stop correctly
- Helps prevent overdrying and underdrying in sensor-based cycles
- Common symptoms of a faulty sensor may include: auto cycles ending too soon or running too long, clothes remaining damp, or the dryer staying on "Sensing" while timed cycles still work
What's included:
Install notes:
- Disconnect power and, if applicable, shut off gas before servicing
- Access the sensor at the front bulkhead/lint housing area; remove front panel as needed per model
- Transfer connectors and route wiring exactly as original; secure the sensor firmly
- Clean the sensor contact surfaces with rubbing alcohol; residue from dryer sheets or fabric softeners can affect readings
Do-It-Yourself Stories from Customers like You
Clothes got stuck on moisture sensor bar and broke it off Felix M. • Kyle , TX • April 17, 2015
Fixed it in 5minutes.
One end has a Phillips head screw and the other has a tab with to metal leads for wires. The end with the tab broke. I removed the screw for the other end abd the sensor bar came off. To put the new piece on, I connected the wires to the leads, slid the tab end into place on the drum and screwed in the other end. Done! Easy!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10378254
Ice maker overflowing or won't stop making ice? This shut-off arm senses ice levels to control production. Simple DIY fix in under an hour.
Do-It-Yourself Stories from Customers like You
Ice maker stopped. Js R. • New Castle , DE • December 07, 2019
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes !
Read more
More
Genuine Ge part
By: Ge
Part Number: WR50X133
Fix frost buildup and warm fresh food section with this clip-on defrost thermostat. Restores automatic defrost cycles. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Top getting warm. Adam L. • Almond , WI • December 24, 2019
I bought a thermostat and defrost timer.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304458371
Fix ice maker overfilling, water spillage, or no ice production. Includes cover, fill cup, bail arm, and harness. Easy 5-10 minute DIY install.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice maker stopped working Michael P. • Clarkston , MI • January 31, 2016
Checked the internet to see what the recommended fix was based upon my model # and the problem I was having. I eventually ended up at the appliance parts pros websites video showing how to remove the ice maker and change it out with a new one. The appliance parts pros video was extremely helpful in the repair process!
When I contacted appliance parts pros via chat on their website they quickly confirmed that this part would fit my model. So I ordered the replacement ice maker and kept my...
Read more
More
Genuine Lg part
By: Lg
Part Number: 6322FR2046G
Washer not heating water or showing tE error? This temperature sensor monitors water temp and signals the control board. Moderate DIY repair fixes temp issues.
Do-It-Yourself Stories from Customers like You
Te error code on my kenmore elite washer Angela R. • Rushville , IN • February 08, 2015
Ordered a new thermistor and replaced the one that the wires had pulled out of.
Note- we secured the wires on the new thermistor with electrical tape before installing.
Read more
More
Genuine Lg part
By: Lg
Part Number: AEQ73110228
Fix a refrigerator that stopped making ice or produces slow, irregular ice cycles. This ice maker assembly restores automatic ice production. Moderate DIY.
Do-It-Yourself Stories from Customers like You
No ice was being produced. Henry M. • Madison , OH • December 01, 2021
Replaced with a new icemaker.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154762601
This dishwasher turbidity sensor measures how dirty the wash water is and reports to the control. Replacing a faulty sensor can restore proper cycle times and cleaning performance for consistent results.
- Monitors water clarity/soil level during the wash
- Sends feedback to the control to adjust cycle length, rinses, and heating
- Failure can cause very long or very short cycles
- Can trigger sensor-related fault indications
What's included: One sensor Install notes:
- Disconnect power at the breaker and shut off water before servicing
- Access the sensor from the bottom near the sump; remove the toe panel if needed
- Unplug the wire harness; release the locking tabs or twist-lock to remove; avoid touching the optical window
- Inspect and reuse the existing seal/retainer if in good condition; seat fully and check for leaks after reassembly
Do-It-Yourself Stories from Customers like You
Leaking from the door and around the sensor gasket. Michael S. • Franklin , WI • May 07, 2023
I replaced the sensor and the seals around the door.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241716101
Ice not dispensing or jamming? A worn auger can't move cubes from bin to chute. This rotating shaft restores smooth dispensing. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Ice dispenser no longer worked properly Alan H. • Birmingham , AL • June 14, 2015
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire...
Read more
More
Genuine Lg part
By: Lg
Part Number: 6501DD2001A
This sensor monitors water flow inside the dishwasher to ensure proper water circulation during wash and rinse cycles. It sends signals to the control board to regulate water intake and pump operation. Replace this sensor if the dishwasher displays error codes related to water flow, fails to fill properly, or stops mid-cycle due to incorrect flow detection.
Do-It-Yourself Stories from Customers like You
Very little water was being let in to the tub. I had already replaced the inlet valve and that didn’t help Kenneth H. • Sunrise Beach , MO • October 10, 2019
I replaced the float assembly. The float assembly was clogged with a soft sludgy material. It works perfectly now
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510213
This sensor monitors operating conditions and relays accurate feedback to the control so cycles run properly. Replacing a failed sensor helps restore correct operation and prevent erratic behavior or fault codes. What it does:
- Detects a specific operating condition and sends a signal to the control
- Helps the machine regulate cycle timing and performance
- Can cause error codes, cycles that won't start or advance, or intermittent shutdowns when failing
- Lead to inconsistent temperatures or sensing behavior depending on application
What's included:
Install notes:
- Disconnect power (and shut off gas/water, if applicable) before servicing
- Access the sensor; note wire positions and connector orientation
- Install the new sensor in the same location and orientation; seat connectors fully
- Clear any stored faults and run a test cycle per the tech sheet
More