Pipe Parts

This washer tub-to-pump hose connects the outer tub to the drain pump, carrying wash water out during the drain cycle. Replacing a cracked, clogged, or leaking hose helps stop leaks, restore dependable draining, and prevent water damage.

• Directs water from the outer tub to the drain pump during drain and spin
• Common symptoms: water leaking under the washer, water left in the drum, slow or no drain, or drain-related error codes
• Wear, heat, or debris/foreign objects can cause splits, soft spots, or blockages
• Restores a sealed flow path to improve drainage and reduce leaks

• Unplug the washer and turn off water supply; use gloves and have towels or a shallow pan ready for residual water
• Access the pump area through the lower front or rear service panel (varies by model)
• Note routing/orientation; move clamps back, seat the new hose fully on both fittings, and resecure clamps
• Run a short rinse/drain cycle and inspect all connections for leaks

The Drain Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub to the drain pipe, facilitating the drainage of water after a wash cycle is complete. 

Causes of a bad drain hose can include regular wear and tear, blockages from debris or lint, cracks or splits due to aging, or damage from improper installation or handling. A compromised drain hose can lead to water leaks and drainage issues.

Symptoms of a bad drain hose include:

• Incomplete water drainage after cycles
• Puddles or leaks near the base of the washer 
• A blocked or restricted flow through the hose
• Detached or disconnected hose ends

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pump Hose is an OEM replacement part for LG washing machines. It is a flexible tube that connects the pump assembly to the internal tub and spins through the detergent dispenser area. The pump hose is responsible for circulating and removing water during the wash and rinse cycles. 

Symptoms of a bad pump hose include:

• Leaks or water not fully draining from the washer 
• Slow or inefficient filling and draining of water  
• Pump running loudly or continuously
• Wet areas under or around the washer

Causes of failure can be cracks or splits developing in the tubing from repeated bending and flexing over time, or blockages restricting water flow.

It is also compatible with some Kenmore models.

The Siphon Break Kit is an OEM part for Whirlpool washing machines. This kit is designed to prevent backflow of water into the washer during the drain cycle, ensuring proper drainage and protecting the machine from potential water damage.

Causes of a bad siphon break can include wear and tear over time, blockages from debris, or damage from improper installation.  

Symptoms of a bad siphon break include:

• Water not draining properly from the washer
• Leaks or water pooling around the washer
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drain Hose Assembly is an OEM part for Whirlpool washing machines. It is responsible for carrying wastewater from the washer to the household drain during the wash and spin cycles.  

Causes of a bad drain hose assembly can include blockages from debris, kinks or cracks in the hose, or general wear and tear from repeated use.  

Symptoms of a bad drain hose assembly include:

• Water not draining properly from the washer
• Leaks or puddles around the washer
• Visible cracks or damage to the hose
• Unpleasant odors due to standing water

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drain Hose is an OEM part for Frigidaire washing machines. This hose is essential for directing used water out of the washing machine and into the household drain system, ensuring efficient water removal after each wash cycle.

You should replace the drain hose if it becomes damaged or clogged. Causes of a bad drain hose include wear and tear from repeated use, blockages from debris or lint, or physical damage such as cracks or splits. A compromised drain hose can lead to water leakage, improper drainage, or even flooding.

Symptoms of a bad Drain Hose include:

• Water not draining properly from the washing machine
• Leaks or puddles of water around the washing machine
• Visible cracks or splits in the hose
• Unusual sounds during the draining process

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dispenser Inlet Hose is an OEM part for LG washing machines. This hose directs water from the water inlet valve to the detergent dispenser, ensuring that water mixes with the detergent before entering the drum for efficient washing. The hose is designed to withstand high water pressure and temperature fluctuations.

Over time, the dispenser inlet hose can become clogged, cracked, or worn out due to regular use. Causes of a bad inlet hose include mineral deposits or debris buildup, wear and tear, and exposure to high temperatures or pressure that can cause the hose to degrade.

Symptoms of a bad dispenser inlet hose include:

• Leaking water around the detergent dispenser area
• Reduced water flow into the dispenser
• Visible cracks or wear on the hose
• Incomplete dissolution of detergent during wash cycles

This OEM LG part is also compatible with Sears/Kenmore.

The Dishwasher Adapter is an OEM part for Whirlpool dishwashers. It serves as a connector, allowing various components of the dishwasher to interface correctly and ensuring proper water flow and pressure throughout the appliance.

Cracks, wear, or damage to the adapter can cause significant issues with the dishwasher's performance.

Symptoms of a bad Dishwasher Adapter include:

• Leaks under or around the dishwasher
• Poor water pressure during cycles
• The dishwasher failing to fill or drain correctly
• Visible cracks or damage to the adapter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Hose Assembly is an OEM part for LG washing machines. It is responsible for carrying wastewater from the washer's tub to the household drain, ensuring proper drainage during and after each wash cycle.

Causes of a bad drain hose can include wear and tear, kinks, cracks, or blockages from debris and lint buildup. A compromised drain hose can lead to leaks or improper drainage, affecting the washer's performance.

Symptoms of a bad drain hose assembly include:

• Water not draining properly from the washer
• Leaks around the hose or from the back of the washer
• Visible cracks, splits, or kinks in the hose
• Error codes related to drainage issues

This OEM LG part is also compatible with Sears/Kenmore models.

The Tub to Pump Hose is an OEM part for Frigidaire washing machines. This part directs water from the tub to the pump during the wash cycle. This flexible hose plays a role in the machine's ability to drain water efficiently after each wash or rinse cycle, ensuring optimal performance. 

Causes for replacement might include wear and tear over time that leads to cracks or holes in the hose, blockages that prevent water from draining properly, or improper installation that results in leaks or water retention. 

Symptoms of a bad Tub to Pump Hose include:

• Leaks found underneath the washing machine
• Problems with the washing machine draining properly
• Puddles of water appearing during or after a wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This drain hose carries used water from your appliance to the home drain during and after the cycle. Replacing a damaged or clogged hose restores proper draining and helps prevent leaks and standing water.

• Routes wastewater from the appliance outlet to the household drain
• Maintains a sealed, unobstructed path for efficient draining
• Helps prevent leaks from splits, brittleness, or loose connections
• Commonly resolves slow/no drain, water left in the tub, or water backing up
• Visible kinks, cracks, or blockages in the hose indicate replacement is needed

• Disconnect power and shut off water supply before servicing
• Place a towel or shallow pan to catch residual water when removing the old hose
• Note original routing and clamp locations; avoid kinks or sharp bends during install
• Fully seat and tighten connections, then run a brief drain to check for leaks

The Pressure Switch Hose is an OEM part for Whirlpool washing machines. This hose connects the pressure switch to the washer tub, allowing the machine to detect water levels and ensure proper operation of the washing cycle.

Common causes of damage include cracks, holes, or clogs in the hose, which can occur due to wear and tear, exposure to harsh detergents, or foreign objects in the washing machine. 

Symptoms of a bad pressure switch hose include:

• The washing machine not filling properly
• Overfilling or underfilling of water
• Error codes related to water levels
• The washer not advancing through cycles correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Size: 48 inches long. Clamp included. For 21 inch extension use 285702.

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

The Hose Assembly & Connector is an OEM part for LG washing machines. This assembly includes the hose and connector, which are essential for supplying water to the washer during operation, ensuring a steady and reliable flow.

Causes of a bad hose assembly and connector can include wear and tear over time, cracks or splits due to pressure or temperature changes, and damage from improper installation or handling. 

Symptoms of a bad Hose Assembly & Connector include:

• Water leaks from the hose or connector
• Low water pressure or flow to the washer
• Visible cracks or splits on the hose
• Water not entering the washing machine properly

This OEM LG part is also compatible with some Kenmore models.