User Interface Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10804115
Dishwasher won't start or LED lights not working? This electronic control board restores responsive controls and proper cycle execution. Moderate difficulty.
More
$151.51
- Compare At:
-
$181.81
- You Save:
-
$30.30
Genuine Ge part
By: Ge
Part Number: WD21X33642
Dishwasher won't advance through cycles or stops mid-wash? The control timer regulates washing, rinsing, and drying phases. Moderate DIY repair.
More
$65.95
- Compare At:
-
$78.97
- You Save:
-
$13.02
Genuine Ge part
By: Ge
Part Number: WH12X10439
Fixes washers that won't start, agitate, or spin. This control board manages cycles and user interface. DIY repair typically takes under 1 hour.
Do-It-Yourself Stories from Customers like You
GE washing machine sporadically agigated during the wash cycle and sporadically spun during the spin/dry cycle. Occasionally it would work if I unplugged the machine and replugged it in. Michael N. • Estero , FL • April 06, 2014
A service tech diagnosed the problem as the control board. He ruled out other potential problems. Estimated it would cost close to $300 to fix above the $90 service charge. I figured that I could do it myself and ordered the control board, opened up the back, removed the original board and installed the new one. Took about an hour. Washing machine is working again. Original service call cost and part totaled less than $200. I'm happy. Hope that the machine functions for many more years.
Read more
More
$169.53
- Compare At:
-
$200.05
- You Save:
-
$30.52
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10187167
If your washer fills but won't agitate or cycles stall and repeat, the timer may be worn. This replacement restores proper cycle advancement in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
I had to replace the timer on our washing machine of course nothing ever braks down at a good time! Brad H. • White Pine , TN • November 22, 2015
I wasn't familiar with this washer since I've never had any other problems with it. So i pulled up a assembly diagram to see how to take it a part.It was simple and only took a few minutes.
Read more
More
$161.74
- Compare At:
-
$190.85
- You Save:
-
$29.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 137070870
Dryer won't start, won't advance cycles, or displays PAU error? This electronic control board manages timing and functions. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Didn’t run at all Gary G. • Florissant , CO • October 14, 2018
Texted the helpline and recieved perfect diagnosis
Read more
More
$156.56
- Compare At:
-
$212.88
- You Save:
-
$56.32
Genuine Frigidaire part
By: Frigidaire
Part Number: 809091203
Fix a dispenser that won't switch between water, crushed ice, or cubed ice, or buttons that don't respond. This control board regulates all dispensing functions.
Do-It-Yourself Stories from Customers like You
Dispenser control assembly worked periodically. Dana M. • Jennings , LA • June 13, 2021
Replaced Dispenser Control Assembly.
Read more
More
$237.49
- Compare At:
-
$280.24
- You Save:
-
$42.75
Genuine Samsung part
By: Samsung
Part Number: DD92-00033C
Dishwasher won't advance cycles or shows flashing lights? The main control board manages cycle timing and water levels. Moderate DIY repair with power off.
This part fixes the following symptoms
-
Touchpad does not respond
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code "over fill" (flashing 'smart auto' and 'heavy' lights) cycle doesn't start in time for water to reach over fill sensor Patrick H. • Conyers , GA • May 19, 2015
Here's what the problem was:
Started the 'Normal' cycle... I closed the door... it calls for water, water fills, ECS sensor doesn't kick it to the next segment of the cycle (wash), so the water over-fills and reaches the over-fill sensor.
So many other are replacing the plastic 'case-brake,' main board, and the ECS sensor. I, however, was able to get by with just the ECS sensor replacement, which is known to be a faulty design by Samsung, supposedly.
The idea is replace the (1) most common...
Read more
More
$188.62
- Compare At:
-
$222.57
- You Save:
-
$33.95
Genuine Lg part
By: Lg
Part Number: EAV43060807
Replacement LED assembly restores screen illumination by replacing the TV's failed LED strips. Use this part to address dim, flickering, or uneven backlighting and improve overall picture visibility. What it does:
- Replaces the TV's backlight LED strips to restore even panel illumination.
- Commonly used when the screen is dim, has dark bands or spots, or the backlight flickers or fails while a faint image remains.
- Fits into the original LED channels and connects to the existing LED driver/board (direct-fit replacement when matched to correct model).
- Does not address unrelated failures such as main board, power supply, or panel matrix faults.
What's included: One LED assembly. Install notes:
- Disconnect power and allow the TV to sit unpowered before starting—work only when fully de-energized.
- Handle the LCD panel and assembly carefully to avoid pressure damage; wear ESD protection when available.
- Verify LED operation before full reassembly (power up with the panel/coverings off only if you are comfortable and it's safe to do so).
Do-It-Yourself Stories from Customers like You
Led freezer light set was burned out for kenmore bottom freezer refrigerator Larry H. • Hermitage , TN • July 27, 2015
Took 10 minutes. Upnplug or turn the power off to the Refig/Freezer. One screw to take off the plastic cover plate where the light LED Assembly is attached and carefully unplug the LED Assembley from the Freezer and remove the cover plate from the top of the Freezer . Unscrew the old LED Assembly from the cover and install the new LED Assembly. Plug the LED Assembly into the Freezer and carfully insert plastic cover plate in the freezer and replace the cover pate screwscrew.
Read more
More
$133.73
- Compare At:
-
$160.48
- You Save:
-
$26.75
Genuine Whirlpool part
By: Whirlpool
Part Number: W11371382
Fixes refrigerator lights or compartments not working. This control board box houses the digital board that regulates all functions. Moderate difficulty repair.
More
$106.37
- Compare At:
-
$126.58
- You Save:
-
$20.21
Genuine Ge part
By: Ge
Part Number: WD21X10363
Fix a dishwasher that won't cycle properly, hangs mid-wash, or resets to default settings. This electronic control board restores normal operation. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Dishwasher wouldn't cycle properly, would hang during washes Renae M. • Kettering , OH • April 20, 2021
I noticed something was wrong when the dishwasher no longer remembered the last cycle performed. After it finished, it would go to a default cycle. A couple of weeks ago, my husband said it wouldn't start. Then I noticed on subsequent washes, there was a high probability that it would hang at a random part of the wash cycle. I was able to reset it though. The last time it stuck was during the pre cycle, where it drains any water and runs the disposer. It hung there all night! I tried cycling...
Read more
More
$147.57
- Compare At:
-
$174.13
- You Save:
-
$26.56
Genuine Ge part
By: Ge
Part Number: WD21X10408
Fix unresponsive buttons or blank display on your dishwasher. This control board and keypad kit restores electronic controls. Moderate DIY, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Dishwasher controls were unresponsive would not start Kevin K. • Dallas , GA • June 28, 2016
I replaced the circuit board behind the pushbuttons. At first there was no change in the controls, then i remembered that the door needed to be closed for it to work. Yah! It works now. $119 parts and installed it myself vs. $450 for a new machine.
Read more
More
$141.95
- Compare At:
-
$170.34
- You Save:
-
$28.39
Genuine Ge part
By: Ge
Part Number: WE4M188
Replacement electromechanical oven timer that restores timed-cooking control on compatible GE ranges and wall ovens. Use it to regain reliable cycle timing for bake, broil and self-clean functions. What it does:
- Advances and times oven cooking cycles so timed bake/broil and self-clean operations run as expected.
- Common symptoms: timer does not move, timed cycles do not start or finish, or oven won't complete a timed cooking cycle.
- Replaces a failed mechanical timing mechanism in the oven control console; interfaces with existing console wiring and mounting.
- Verify model compatibility using your appliance model number before ordering.
What's included: One timer assembly. Install notes:
- Disconnect power to the appliance at the circuit breaker before beginning any repair.
- Label or photograph wire locations before removal to ensure correct reconnection.
- Use basic hand tools and avoid forcing connectors; handle the assembly carefully.
Do-It-Yourself Stories from Customers like You
Bad timer on dryer Keith B. • Mc Bee , SC • June 07, 2015
Replaced part 10 minutes.
Read more
More
$171.37
- Compare At:
-
$203.93
- You Save:
-
$32.56
Genuine Ge part
By: Ge
Part Number: WE4M488
Fix E01 error codes or a dryer that won't start with this control board replacement. Controls drying time and temperature settings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
This time it’s the dryer. Prior it was the washer and dishwasher and AppliancePartsPros has made it possible to fix them all Scott L. • La Grange , KY • December 05, 2021
Replaced the power board. I’ve repaired the belt, door, bearings, and door lock on this dryer.
Read more
More
$272.72
- Compare At:
-
$324.54
- You Save:
-
$51.82
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385744
This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.
- Houses and supports the timer/controls so they mount securely
- Protects and organizes wiring within the control area
- Restores proper alignment for knobs and switches
- Replaces cracked, warped, or broken consoles that cause loose or misaligned controls
What's included: 1 console assembly Install notes:
- Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
- Remove control knobs and any retaining screws; lift off the old console
- Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
- Reinstall and verify controls move freely and the console is firmly secured before restoring power
Do-It-Yourself Stories from Customers like You
Whirlpool gu2500 "normal" light constantly blinking unit would not turn on Darian S. • Maricopa , AZ • November 15, 2015
The Knowledge Base at Appliance Parts Pro identified that this condition is caused by a faulty Control Panel. Appliance Parts Pros had the lowest price. Other vendors wanted as much as 2X more. Appliance Parts Pros had videos that show exactly how to replace it. I would not even had attempted it had i not seen how easy it was. After watching the videos it took all but about 10 minutes
Read more
More
$179.95
- Compare At:
-
$215.33
- You Save:
-
$35.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946475
Washer stops mid-cycle or won't advance through cycles? This timer controls cycle progression. Moderate DIY repair taking 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Not agitating noisy running Danny T. • Kahului , HI • January 07, 2016
With the help of the videos.... really made it easy and much better than the book----(which Shawn also got for me, and I can refer to if I cant access "Matt" on the video)....took all of 15 minutes once I had everything ready as the video said...and it worked just like he said Yea!!!!
He made it so simple, my cat could've done it if she had hands...
Read more
More
$207.49
- Compare At:
-
$248.16
- You Save:
-
$40.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828
Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle James L. • Brandywine , MD • December 06, 2014
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20...
Read more
More
$189.84
- Compare At:
-
$213.76
- You Save:
-
$23.92